Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than turning the key and getting nothing, or worse, having your engine cut out in traffic. These are classic signs of a failing Fuel Pump Control Module (FPCM), also known as a Fuel System Control Module (FSCM). This critical component regulates the voltage sent to your fuel pump, ensuring your engine gets the precise amount of fuel it needs. When it fails, it can leave you stranded. This Programmed GM Fuel Pump Control Module is the definitive, hassle-free solution to get you back on the road with confidence.
Common Symptoms & Your Solution
A faulty FPCM can mimic other fuel system problems, but it often triggers specific Diagnostic Trouble Codes (DTCs). If your scanner is showing codes like P069E, P0230, or P0627, a failing module is the most likely culprit. You might also experience:
- Engine cranks but won’t start
- Stalling, especially under load or when warm
- Rough idling or engine hesitation
- Reduced engine power and poor acceleration
- Check Engine Light illumination
Don’t waste time and money chasing the wrong parts. This module is the direct fix for these issues. We take the guesswork out of the repair by pre-programming the unit to your vehicle’s specific Vehicle Identification Number (VIN) before it ships. This means it arrives ready for a true plug-and-play installation, saving you a costly trip to the dealership for programming.
Expert Insight: The Driveway Fix That Saved a Vacation
We once had a customer, Mark, whose 2009 Tahoe stalled just as he was packing up for a family road trip. The local shop quoted him over $700 and a two-day wait for a new module and the required dealer programming. He was stressed and ready to cancel his plans. Instead, he ordered our Programmed GM Fuel Pump Control Module. It arrived the next day, he provided his VIN, and we shipped it out pre-flashed. He installed it himself in under an hour with basic hand tools right in his driveway. The Tahoe fired up on the first try, and his family was back on the road. He saved hundreds of dollars and, more importantly, his vacation. That’s the peace of mind this solution provides.
Features & Benefits
- ✔ VIN-Programmed for You: Arrives 100% ready to install. No extra tools or dealer visits required. Just provide your VIN at checkout, and we handle the rest.
- ✔ Restores Peak Performance: Eliminates stalling, hard starts, and hesitation by delivering precise fuel pressure control as engineered by the factory.
- ✔ Direct-Fit Replacement: Engineered to be a perfect replacement for a wide range of original part numbers, including 13501024, 15213110, 20759945, 20850907, 25785013, 25866052, and 25967325.
- ✔ Built for Reliability: Solves common failure points associated with the original modules, ensuring long-lasting performance for your work truck or family SUV.
- ✔ This unit is backed by our one-year replacement warranty.
Take control of your repair and restore the dependability of your vehicle. By installing this Programmed GM Fuel Pump Control Module, you’re not just replacing a part; you’re restoring your confidence in your truck or SUV’s ability to get you where you need to go, every single time.
Frequently Asked Questions
What exactly does a Fuel Pump Control Module do?
The FPCM acts as a smart controller for your vehicle’s fuel pump. Instead of the pump running at full speed all the time, the FPCM precisely regulates the voltage it receives based on engine demand. This improves efficiency, reduces wear on the fuel pump, and ensures optimal engine performance.
How do I provide my VIN for programming?
After you complete your purchase, you will receive instructions on how to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is essential for the module to function correctly in your vehicle.
Is this part difficult to install?
For most of the listed GM trucks and SUVs, the FPCM is located on the driver’s side frame rail and is accessible with basic hand tools. It’s typically held on by two bolts and has one electrical connector. For a DIYer with moderate experience, it’s a very straightforward installation that can often be completed in under an hour.
Will this module fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Requested MIL Illumination) is one of the most common codes indicating a failed FPCM. Replacing the module with this pre-programmed unit is the standard and most effective repair for this specific code.
What happens if a new module isn’t programmed?
An unprogrammed FPCM will not communicate properly with your vehicle’s main computer (ECM/PCM). This will result in a no-start condition and will likely set communication error codes. Our pre-programming service eliminates this entire problem, making the repair simple and effective.
How does the one-year replacement warranty work?
This unit is backed by our one-year replacement warranty. If the module fails within one year from the date of purchase, we will provide a direct replacement. Please contact our customer service for assistance with the process.