Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than a vehicle you can’t rely on. If your Escalade, Silverado, Tahoe, or other GM vehicle is suddenly stalling at intersections, hesitating when you accelerate, or simply won’t start, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. This critical component regulates the voltage sent to your fuel pump, and when it fails, it starves your engine of fuel, leaving you stranded. Restore your vehicle’s performance and your peace of mind with this direct-fit, pre-programmed solution.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can trigger a range of issues and specific trouble codes. If you’re experiencing any of the following, this module is the definitive fix:
- Sudden engine stalling, especially at low speeds or idle
- Vehicle cranks but will not start
- Hesitation or sputtering during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes like P069E, P0230, or P025A
Don’t just replace the part—solve the problem correctly the first time. This is a genuine Programmed GM Fuel Pump Control Module 25785013 that arrives at your door ready for installation. We use your vehicle’s VIN to flash the module with the latest, most stable software from General Motors, ensuring perfect communication with your vehicle’s computer systems and eliminating the need for an expensive trip to the dealership for programming.
Features & Tangible Benefits
- ✔ VIN-Specific Programming Included: Your module arrives ready to install. No dealer visits, no special tools, no extra programming fees. Just plug it in and go.
- ✔ Loaded with Latest GM Software: We flash the unit with the newest updates to correct factory flaws, improve fuel delivery, and ensure long-term reliability.
- ✔ Restores Engine Performance: By providing precise voltage to the fuel pump, this module restores crisp acceleration and a stable idle, making your vehicle drive like new again.
- ✔ Direct-Fit OEM Compatibility: Engineered to match the original part perfectly, guaranteeing a hassle-free installation on a wide range of GM trucks and SUVs.
- ✔ Solves Common Failure Codes: The perfect solution for clearing persistent codes like P069E and restoring communication with the fuel system.
- ✔ This unit is backed by our one-year replacement warranty.
An Expert’s Insight: Why Pre-Programmed is Non-Negotiable
As a technician, I’ve seen countless drivers waste time and money on this exact issue. These FPCMs are often mounted on the frame rail, exposed to water, salt, and vibration, which leads to internal failure. Many people buy a used module from a junkyard, only to find out the vehicle still won’t start because it’s not programmed to their specific VIN. The vehicle’s computer simply won’t recognize it. Our service takes all the guesswork out. By providing a Programmed GM Fuel Pump Control Module 25785013, we give you a part that not only fixes the physical failure but also solves the critical software side of the equation, saving you a tow bill and hundreds in dealer labor.
Frequently Asked Questions
Do I need to get this module programmed by a dealer?
Absolutely not. The main benefit of our service is that the module arrives at your door already programmed to your vehicle’s specific VIN. This makes the installation a true plug-and-play process, saving you time and the high cost of dealership programming.
Where is the FPCM located on my vehicle?
On most compatible models like the Silverado, Tahoe, and Escalade, the Fuel Pump Control Module is located on the driver-side frame rail, typically above the spare tire. It’s usually held in place by a couple of small bolts.
What is a VIN and why do you need it?
VIN stands for Vehicle Identification Number. It’s a unique 17-digit code for your specific vehicle. We require your VIN to load the exact software and calibrations from GM for your truck or SUV’s engine, transmission, and options package. This ensures perfect compatibility.
How do I provide my VIN after purchase?
After completing your purchase, simply send us a message with your 17-digit VIN. We cannot ship your order until we receive this information, as the programming is a required step.
Will this fix a P069E trouble code?
Yes, the code P069E (Fuel Pump Control Module Commanded OFF) is one of the most common indicators of a failed FPCM. Replacing your old module with this Programmed GM Fuel Pump Control Module 25785013 is the correct and most reliable way to resolve this code and the underlying issue.