Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than a vehicle you can’t depend on, especially when it’s a capable machine like an Escalade, Sierra, or Tahoe. If you’re experiencing sudden engine stalls, rough idling, a check engine light, or a complete no-start condition, the culprit is often a failed Fuel Pump Control Module (FPCM). This small but critical component regulates the voltage sent to your fuel pump, and when it fails, it leaves you stranded. Get back on the road with confidence with this direct-fit, pre-programmed solution.
Common Symptoms & Your Solution
A faulty FPCM can manifest in several ways, often triggering diagnostic trouble codes (DTCs) that point directly to a fuel system issue. If your scanner is showing codes like P069E, P0230, or U0109, it’s a strong indication that your module has failed. Instead of paying for expensive diagnostics and programming fees at a dealership, this is your definitive, hassle-free fix. We provide a genuine GM Fuel Pump Control Module 13501024 that is professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN) before it ships. This ensures perfect communication with your vehicle’s computer systems and restores performance right out of the box.
Features & Real-World Benefits:
- âś” VIN-Programmed for Your Vehicle: We flash the module with the latest GM software using your VIN. This eliminates the need for expensive dealer tools or programming appointments.
- âś” Plug-and-Play Installation: Because it arrives pre-programmed, installation is straightforward. Simply disconnect the old module, mount the new one, and plug it in.
- âś” Restores Proper Fuel Pressure: A new module ensures your fuel pump receives the correct voltage, restoring stable fuel pressure for smooth acceleration and reliable starting.
- âś” Solves Common DTCs: Directly addresses codes like P069E (Fuel Pump Control Module Commanded OFF) and other related fuel system faults, clearing your check engine light for good.
- âś” Broad GM Compatibility: This single part number, 13501024, replaces a wide range of previous part numbers, including 20759945, 25866052, and 25967325, for a perfect fit on dozens of GM models.
- âś” Peace of Mind: This unit is backed by our one-year replacement warranty.
Expert Insight from a 20-Year Technician
One of the most overlooked causes of repeat FPCM failure on these GM trucks and SUVs is a poor ground connection. The module is often mounted to the frame rail, exposed to the elements. Over time, rust and corrosion build up between the module’s mounting points and the frame, creating electrical resistance. This resistance generates excess heat, which cooks the electronics inside the module, leading to premature failure. Pro-Tip: When you install your new GM Fuel Pump Control Module 13501024, take five extra minutes to clean the mounting location on the frame with a wire brush until you see shiny, bare metal. Apply a thin layer of dielectric grease to prevent future corrosion. This simple step can dramatically extend the life of your new part.
Frequently Asked Questions
How do I provide my VIN for programming?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is essential for the part to function in your vehicle.
Is this part difficult to install?
For most of the listed trucks and SUVs, the module is located on the driver’s side frame rail, near the spare tire. It’s typically held on by two bolts and has one electrical connector. With basic hand tools, most people can replace it in under 30 minutes. Since our module is pre-programmed, no special electronic tools are needed.
Will this fix my P069E error code?
Yes, the P069E code is one of the most common indicators of a failed FPCM. Replacing the faulty module with this pre-programmed unit is the standard and most effective repair for this specific code.
What happens if I install it without programming?
An unprogrammed module will not work. The vehicle’s security and computer systems will not recognize it, and the fuel pump will not activate. Our pre-programming service is what makes this a true plug-and-play solution.
Is this a genuine GM part?
Yes, this is an authentic GM Fuel Pump Control Module 13501024, ensuring OEM quality, fitment, and performance. You are getting the same quality part you would from a dealer, but with the convenience of pre-programming.