Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than turning the key in your Escalade, Silverado, or Tahoe and getting nothing but a crank. Intermittent stalling, rough idling, and a sudden loss of power can leave you stranded and questioning your vehicle’s reliability. These are classic signs of a failing Fuel Pump Control Module (FPCM). This component is the brain of your fuel system, and when it falters, it can cause a cascade of problems that sideline your powerful and otherwise dependable vehicle. Don’t let a small electronic module dictate your schedule—take control with a reliable, pre-programmed solution.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can mimic other issues, but it often triggers specific diagnostic trouble codes (DTCs) and symptoms. If you’re experiencing any of the following, this module is the definitive fix you need:
- Engine cranks but will not start
- Sudden engine stalling, especially under load
- Hesitation or stumbling during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes like P069E, P0230, or P0627
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take a quality GM 25854536 fuel pump control module and program it specifically to your vehicle’s VIN using the latest GM software updates. This critical step ensures perfect communication with your vehicle’s computer systems, restoring factory performance and eliminating the common software glitches that plagued original units.
Features & Benefits
- ✔ Plug-and-Play Installation: Arrives pre-programmed to your vehicle’s VIN. No expensive trip to the dealership for flashing or calibration is required. Simply install it and turn the key.
- ✔ Updated GM Software: We load the newest software available from General Motors, which addresses the original factory flaws and improves the module’s reliability and performance.
- ✔ Restored Engine Performance: By delivering precise voltage to the fuel pump, this module restores correct fuel pressure, fixing issues with starting, idling, and acceleration for a smooth, powerful ride.
- ✔ Guaranteed Compatibility: This unit is a direct replacement for a wide range of original part numbers, including 25854536, 13501024, 20759945, 25967325, and more, ensuring a perfect fit for your specific model.
- ✔ One-Year Warranty: This unit is backed by our one-year replacement warranty, giving you complete confidence in your purchase.
An Expert’s Insight: Why a Pre-Programmed Module Matters
As a technician, I’ve seen countless GM trucks and SUVs come in with fuel delivery issues. The FPCM is often mounted on the frame rail, where it’s exposed to water, salt, and vibration, leading to internal corrosion and failure. Many people are tempted to grab a used module from a salvage yard, but that’s a huge mistake. A used module will not be programmed for your vehicle’s specific options and VIN, leading to a no-start condition and a mandatory, costly tow to the dealer. Our pre-programmed GM 25854536 fuel pump control module with updated software is the smarter, more reliable repair. It not only fixes the immediate problem but also provides a more durable solution than the original part, saving you time, money, and future headaches.
Frequently Asked Questions
Do I need to program this module after I receive it?
No. This is the primary benefit of our service. We program the module to the VIN you provide during checkout. It will arrive at your door ready for a direct, plug-and-play installation, with no further programming needed.
Where is the FPCM located on my vehicle?
On most GM trucks and full-size SUVs like the Escalade, Silverado, and Tahoe, the Fuel Pump Control Module is typically mounted to the driver’s side frame rail, near the spare tire. On other models, it may be in the rear near the crossmember or in the engine compartment. Always consult a service manual for your specific vehicle for the exact location.
How do I provide my VIN?
After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as it is essential for the programming process.
Will this fix a P069E trouble code?
Yes, the code P069E (Fuel Pump Control Module Commanded OFF) is one of the most common indicators of a failed FPCM. While you should always perform a complete diagnosis, replacing a faulty module with this pre-programmed unit is the standard and effective repair for this code.
Is this a genuine GM part?
This is a high-quality replacement part built to meet or exceed original specifications. It is programmed using official GM software to ensure it functions identically to a dealer-supplied part, providing a reliable and cost-effective solution.