Programmed GM 20964304 Fuel Pump Control Module | 2013-2014 Yukon & More

Get Back on the Road with Confidence

End the frustration of an unreliable vehicle. This Fuel Pump Control Module is professionally programmed to your VIN, delivering a seamless, ready-to-install solution. Restore your vehicle’s dependability and drive with peace of mind. Add to cart for a hassle-free repair.

$244.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Is your Yukon, Tahoe, or Escalade suffering from stalling, a no-start condition, or a ‘Service Fuel System’ warning? A failing Fuel Pump Control Module is often the culprit, leaving you stranded and frustrated. This pre-programmed module is the direct-fit, dealership-alternative solution to get you back on the road with confidence. We professionally flash this module with the latest GM software using your VIN, so it arrives at your door ready for a simple, plug-and-play installation.

Common Symptoms & Your Solution

A faulty FPCM can cause a range of baffling issues, from intermittent stalling to a vehicle that won’t start at all. You might be experiencing hesitation during acceleration, a rough idle, or a persistent Check Engine Light. Our VIN-programmed GM 20964304 Fuel Pump Control Module is the definitive fix for these problems, restoring precise fuel delivery and stable engine operation. It directly addresses common DTCs like P069E (Fuel Pump Control Module Commanded On), P0230 (Fuel Pump Primary Circuit Malfunction), and P025A (Fuel Pump Module Control Circuit/Open), eliminating the guesswork and getting your vehicle running like new.

  • ✔ VIN-Programmed for You: We flash the module with the latest GM software using your vehicle’s VIN. This ensures perfect communication and function right out of the box—no extra trips to the dealer.
  • ✔ Direct-Fit Replacement: Engineered to match the original part (20964304, 20964305), guaranteeing a perfect fit and seamless installation on the frame rail or in the rear compartment, depending on your model.
  • ✔ Restores Engine Performance: A new module ensures your fuel pump receives the correct voltage, restoring proper fuel pressure for smooth acceleration, consistent idling, and reliable starting.
  • ✔ Solves Common DTCs: Directly addresses diagnostic trouble codes related to the fuel pump control circuit, helping you clear that pesky check engine light and pass inspections.
  • ✔ Built for Dependability: Constructed with quality components to withstand the harsh conditions under your vehicle, providing a long-lasting and reliable repair.
  • ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty.

Expert Insight from a 20-Year Technician:

I’ve seen countless drivers chase fuel-related issues by replacing the pump first, only to find the problem was the FPCM all along. These modules control the voltage to the pump. When they fail, they can starve the engine of fuel intermittently, causing symptoms that are incredibly hard to diagnose. By providing a GM 20964304 Fuel Pump Control Module that’s pre-flashed to your VIN, we’re not just selling a part; we’re providing a precise, definitive solution that saves you time, money, and the headache of a misdiagnosis.

Frequently Asked Questions

Do I need to get this module programmed by a dealer?

No! That is the primary benefit of our service. We program the module to your specific vehicle using the VIN you provide during checkout. It arrives at your door ready to be installed, saving you from costly dealership programming fees.

Where is this module located on my vehicle?

The location varies by model. On most trucks and SUVs like the Yukon, Tahoe, and Sierra, it’s mounted on the driver’s side frame rail near the spare tire. On cars like the CTS or Impala, it’s typically found in the trunk or rear compartment area. We always recommend consulting a service manual for your specific vehicle to confirm the location.

Is this the same as a Fuel Pump Driver Module (FPDM)?

Yes, the terms Fuel Pump Control Module (FPCM), Fuel Pump Driver Module (FPDM), and Fuel System Control Module (FSCM) are often used interchangeably for this component. This module performs that function for your GM vehicle.

What happens if I install an unprogrammed module?

An unprogrammed or incorrectly programmed module will not communicate with your vehicle’s Engine Control Unit (ECU/PCM). This will result in a no-start condition and will set communication-related trouble codes. Our pre-programming service completely prevents this issue.

How do I provide my VIN?

After you complete your purchase, you will need to provide us with your vehicle’s 17-digit Vehicle Identification Number (VIN). We cannot ship your GM 20964304 Fuel Pump Control Module until we receive this information and complete the programming.

Brand

GM

Year
Year

2013

Make

Model

YUKON

Manufacturer Part Number

,

MPN

20964304

Genuine OEM

Yes

Condition

Seller refurbished

Interchange part number

Scroll to Top