Get Your GM Truck or SUV Back on the Road, Fast.
Is your reliable Avalanche, Silverado, or Tahoe suddenly giving you trouble? Stalling at intersections, hesitating under acceleration, or refusing to start altogether can be incredibly frustrating. These aren’t just inconveniences; they’re problems that leave you stranded and questioning your vehicle’s dependability. More often than not, the culprit is a failed Fuel Pump Control Module (FPCM), and this pre-programmed unit is the definitive, hassle-free solution to get you running right again.
Common Symptoms & Your Solution
A failing FPCM can mimic a bad fuel pump, leading to expensive misdiagnoses. Before you replace the entire pump, check if your vehicle is exhibiting these classic signs of a faulty module. You may have a check engine light with diagnostic trouble codes (DTCs) like P069E, P0230, or even general communication codes. This module is engineered to permanently fix those issues. We take the guesswork and the expensive dealership trip out of the equation. By providing us with your VIN, we flash this module with the latest GM software specific to your vehicle. It arrives at your door ready for a true plug-and-play installation, restoring the precise fuel pressure control your engine needs to perform its best. This is the most efficient way to install a new Programmed GM Fuel Pump Control Module and restore your vehicle’s performance and reliability.
- ✔️ VIN-Programmed for You: Arrives ready to install with the latest GM updates for your specific vehicle. No extra programming required.
- ✔️ Eliminate Stalling & No-Starts: Directly addresses the root cause of common fuel delivery issues, restoring crisp engine performance.
- ✔️ Skip the Dealership: Avoid expensive diagnostic fees, programming charges, and the hassle of a service appointment.
- ✔️ Direct-Fit Replacement: Engineered to replace a wide range of original part numbers, including 13501024, 20759945, and 25967325, ensuring a perfect fit.
- ✔️ Built for Durability: Designed to meet or exceed original specifications for long-lasting dependability on your work truck or family SUV.
- ✔️ Peace of Mind Included: This unit is backed by our one-year replacement warranty.
Expert Insight: The Smart Repair
As a technician, I’ve seen countless owners spend a fortune chasing fuel issues. The old process was a nightmare: diagnose the FPCM, order the part, have the vehicle towed to a dealer, and then pay them a hefty fee just to program the new module. We’ve streamlined that entire process. By sending you a Programmed GM Fuel Pump Control Module that’s already matched to your VIN, we turn a multi-day, high-cost repair into a simple part swap you or your trusted mechanic can do in a fraction of the time. It’s the most logical and cost-effective solution to a very common GM problem.
Frequently Asked Questions
Why do I need to provide my VIN?
Your Vehicle Identification Number (VIN) allows us to load the exact, most current software calibration from GM for your vehicle’s specific configuration (engine, transmission, emissions). This ensures perfect communication and function right out of the box, just like the original part.
Is this part truly plug-and-play?
Yes. Because we program it before shipping, you simply need to disconnect the old module and connect this new one. There are no additional steps, dealer visits, or special tools required for programming, making the installation straightforward.
What are the most common signs of a bad FPCM?
The most common symptoms include the engine cranking but not starting, stalling while driving (especially when warm), hesitation, reduced engine power, and a check engine light with codes like P069E (Fuel Pump Control Module Commanded On).
Where is this module located on my vehicle?
On most GM trucks and SUVs like the Silverado, Sierra, and Tahoe, the FPCM is mounted to a frame rail, typically on the driver’s side. On other models, it may be on a rear crossmember or in the engine compartment. It’s usually exposed to the elements, which contributes to its failure over time.
Will this fix a P069E code?
A P069E code is one of the most definitive indicators of a failed Fuel Pump Control Module. In the vast majority of cases, replacing the faulty module with this correctly programmed unit will resolve the code and the underlying issue.
What if my old part has a different number on it?
No problem. GM has updated this part several times. This single Programmed GM Fuel Pump Control Module is a direct replacement for many older part numbers, including 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.