Restore Power and Reliability to Your GM Vehicle
Is your truck or SUV suffering from frustrating starting issues, stalling, or a sudden loss of power? A faulty Fuel Pump Control Module is often the culprit, leaving you stranded and searching for a reliable solution. This isn’t just an inconvenience; it’s a critical failure that compromises your vehicle’s performance and your confidence on the road. Our pre-programmed 25785013 Fuel Pump Control Module is the definitive, hassle-free answer to get your vehicle running strong again.
Common Symptoms & Your Direct-Fit Solution
A failing FPCM can mimic other fuel system problems, but it often presents with a specific set of symptoms. If you’re experiencing any of the following, this module is your likely solution:
- Engine cranks but refuses to start
- Sudden engine stalling, especially while driving
- Hesitation or stumbling during acceleration
- Noticeable loss of engine power and poor performance
- Check Engine Light with codes like P069E, P0230, or P0627
Instead of paying for expensive dealership diagnostics and programming fees, this module arrives at your door ready for installation. We use your vehicle’s VIN to flash it with the latest, most stable software from GM, ensuring it communicates perfectly with your onboard computer from the moment you plug it in.
Features & Benefits
- ✔ VIN-Programmed for You: Arrives ready to install, flashed with the latest GM software for your specific vehicle. This eliminates the need for an expensive trip to the dealership for programming.
- ✔ Restores Engine Performance: Regain consistent fuel pressure for smooth idling, sharp acceleration, and reliable starting every time.
- ✔ Direct-Fit Replacement: Engineered to be a perfect match for the original module, ensuring a straightforward installation with no modifications needed.
- ✔ Broad GM Compatibility: Replaces a wide range of original part numbers, including 13501024, 20759945, and 25866052, making it the correct choice for dozens of popular GM trucks, vans, and SUVs.
- ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
Expert Insight: The Critical Role of the FPCM
Think of the Fuel Pump Control Module as the brain behind your fuel pump. Unlike older systems that ran the pump at full speed all the time, modern vehicles use this module to precisely vary the voltage sent to the pump. This provides the exact amount of fuel the engine needs, improving efficiency and extending the life of the fuel pump. When the module fails, this precise control is lost, leading to the erratic performance and no-start conditions that leave you stranded. Our pre-programmed 25785013 Fuel Pump Control Module restores this critical function perfectly.
Frequently Asked Questions
How do I provide my VIN for programming?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your order until we receive the VIN, as this step is essential for programming the module correctly for your specific vehicle.
Is this a true plug-and-play part?
Yes. Because we program the module to your VIN before shipping, it is ready for installation right out of the box. No further programming or calibration with a scan tool is required. Just disconnect the old module and connect the new one.
Where is this module located on my vehicle?
The location varies slightly by model. On most GM trucks and large SUVs (like the Silverado, Sierra, Tahoe, and Suburban), the FPCM is mounted to the driver’s side frame rail, typically above the spare tire. On other models, it may be on a rear crossmember or in the rear engine compartment. A quick search for your specific model will confirm the exact location.
What happens if I install a module that isn’t programmed?
An unprogrammed module will not communicate with your vehicle’s main computer (ECU). This means your fuel pump will not activate, and the engine will not start. The programming step is not optional; it is a required security and operational handshake for the part to function.
Will this fix a Check Engine Light with code P069E?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. Replacing the faulty unit with this pre-programmed 257850013 Fuel Pump Control Module is the correct repair for this and related fuel system codes.