Get Your Vehicle Running Reliably Again
Is your truck, SUV, or sedan suffering from frustrating starting issues, unexpected stalling, or a persistent check engine light? A failing Fuel Pump Control Module (FPCM) is often the culprit, disrupting the precise fuel delivery your engine needs to perform. This isn’t just an inconvenience; it’s a reliability issue that can leave you stranded. Our pre-programmed module is the definitive, hassle-free solution to restore your vehicle’s performance and your peace of mind.
Common Symptoms & Your Solution
If you’re experiencing any of the following, a faulty FPCM is the likely cause. This module directly addresses these issues:
- No-Start or Hard-Start Conditions: The engine cranks but refuses to start, or takes an excessively long time to turn over.
- Engine Stalling: The engine cuts out unexpectedly, often at low speeds or while idling, which can be a serious safety concern.
- Reduced Engine Power: Your vehicle feels sluggish and lacks its normal acceleration.
- Check Engine Light: Common diagnostic trouble codes (DTCs) like P069E, P0230, or P0627 point directly to a fault in the fuel pump control circuit.
We solve this problem by providing a high-quality Programmed 20964305 Fuel Pump Control Module that is flashed with the latest official GM software specifically for your vehicle. By providing your VIN at checkout, you receive a part that is truly plug-and-play, eliminating the costly and time-consuming trip to a dealership for programming.
Features & Benefits
- ✔ VIN-Specific Programming: Arrives ready for installation, pre-flashed with the newest GM updates for your exact vehicle. No extra steps or tools required.
- ✔ Eliminate Guesswork: This is a direct-fit replacement for part numbers 20964305 and 20964304, ensuring perfect compatibility and function.
- ✔ Restore Peak Performance: Correctly regulates fuel pressure to restore lost horsepower, improve throttle response, and ensure smooth idling.
- ✔ Solve Common Failure Points: A brand-new module resolves issues caused by internal circuit failure, corrosion, or heat damage in the original unit.
- ✔ Save Time and Money: Skip the expensive diagnostic and programming fees at the dealership. This is a solution you can install with confidence in your own garage.
- ✔ Dependable Operation: This unit is backed by our one-year replacement warranty.
A Technician’s Tip: The Programming is Everything
As a mechanic, I’ve seen countless DIYers and even some shops install a new, un-programmed FPCM only to have the exact same problem persist. The vehicle’s computer (ECM) will not recognize or communicate with a blank module. It’s like installing a new computer without an operating system. Our service handles this critical step for you. By programming the module to your VIN before we ship, we ensure the part is 100% ready to integrate with your vehicle’s system the moment you plug it in. This is the secret to a successful and stress-free repair.
Frequently Asked Questions
How does the programming process work?
It’s simple. After you complete your purchase, you provide us with your vehicle’s 17-digit VIN. Our technicians use this information to load the latest, most stable GM-approved software for your specific make, model, and options onto the module before it is shipped.
Is this a direct replacement for my original module?
Yes, this is a direct-fit replacement for original part numbers 20964305 and 20964304. Please verify the part number on your old module or consult the detailed fitment list on this page to ensure compatibility.
Do I need any special tools for installation?
In most cases, installation requires only basic hand tools like a socket set and ratchet. The module is typically located on the driver’s side frame rail on trucks and SUVs or in the rear of the vehicle on sedans and crossovers. Always disconnect the battery before beginning any electrical work.
What happens if I install a module that isn’t programmed?
An un-programmed module will not work. Your vehicle’s computer will not be able to communicate with it, and your original symptoms (no-start, stalling, etc.) will remain. Our pre-programming service is essential for the part to function correctly.
Where is the FPCM located on my vehicle?
The location varies. For most trucks and large SUVs like the Silverado, Tahoe, or Escalade, it’s on the driver’s side frame rail. For crossovers like the Traverse or Acadia, it’s often on the rear crossmember. For sedans like the CTS or Impala, it can be in the trunk or rear quarter panel area.
How can I be certain this part will fit my vehicle?
The best way is to cross-reference the part number on your existing module. Additionally, please review the comprehensive fitment list provided in our description. Providing your VIN for programming also acts as a final check for compatibility.