Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
Nothing is more frustrating than a vehicle you can’t rely on. If you’re experiencing sudden engine stalls, difficulty starting, a check engine light with fuel system codes, or erratic performance, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. Don’t let a small electronic box leave you stranded. This is your permanent, plug-and-play solution—a genuine GM Programmed 20964305 Fuel Pump Control Module that arrives flashed specifically to your vehicle’s VIN, getting you back on the road with confidence.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can mimic a bad fuel pump, leading to incorrect diagnoses and wasted money. Before you consider replacing the entire in-tank pump assembly, check if your vehicle is showing these classic signs of a module failure:
- Check Engine Light: Often with diagnostic trouble codes (DTCs) like P069E, P0230, or P064A.
- Stalling Engine: The engine may cut out unexpectedly while driving or idling.
- No-Start Condition: The engine cranks but won’t start due to a lack of fuel pressure.
- Hesitation or Stumbling: The vehicle may hesitate or stumble during acceleration as the module fails to command the correct fuel pressure.
- Reduced Engine Power Mode: Your vehicle may enter a ‘limp mode’ to protect the engine.
This module is the definitive fix. We take a genuine GM component and professionally flash it with the latest official software update from General Motors, tailored precisely to your vehicle using the VIN you provide. This eliminates the need for an expensive trip to the dealership for programming, saving you time and money.
Features & Tangible Benefits
- ✔ VIN-Specific Programming: We flash the module to your exact Vehicle Identification Number before it ships, ensuring it communicates perfectly with your vehicle’s computer systems right out of the box.
- ✔ Plug-and-Play Installation: Because it’s pre-programmed, there’s no need for special scan tools or dealership intervention. Simply disconnect the old module and plug this one in.
- ✔ Latest GM Software Updates: Your module comes loaded with the newest calibrations from GM, which often resolve inherent issues and improve fuel system stability and performance.
- ✔ Restored Performance & Reliability: Eliminate stalling, hard starts, and hesitation. Regain the confidence that your vehicle will start and run smoothly every single time.
- ✔ Cost-Effective Repair: Avoid the high labor costs and programming fees charged by dealerships. This is a straightforward DIY-friendly solution that saves you hundreds.
- ✔ This unit is backed by our one-year replacement warranty.
A Technician’s Insight: For years, we’ve seen customers replace fuel pumps only to find the problem persists. On these specific GM platforms, the FPCM is a common failure point. It’s exposed to the elements on the frame rail, leading to corrosion and electronic failure. The critical step most people miss is programming. A new module from a parts store won’t work until it’s programmed by a dealer. Our service bridges that gap, giving you a dealer-level fix with the convenience of ordering online. This Programmed 20964305 Fuel Pump Control Module isn’t just a part; it’s a complete, ready-to-install solution.
Stop guessing and start fixing. By ordering this pre-programmed module, you’re not just buying a part; you’re buying a guaranteed solution that restores your vehicle’s dependability. Provide your VIN at checkout and let us handle the complex part, so you can enjoy a simple, effective repair. Trust in a professionally prepared Programmed 20964305 Fuel Pump Control Module to get the job done right the first time.
Frequently Asked Questions
Why do I need to provide my VIN?
Your Vehicle Identification Number (VIN) is essential because the Fuel Pump Control Module must be programmed with software specific to your vehicle’s exact configuration (engine, transmission, options). This ensures it works seamlessly with your other onboard computers. Without VIN-specific programming, the part will not function.
Is this part difficult to install?
For most of the listed trucks, vans, and SUVs, the module is located on the driver’s side frame rail and is held in place by a few bolts. It’s generally considered a straightforward installation for someone with basic mechanical skills. Since our module is pre-programmed, the electronic side of the job is already done for you.
Will this fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. While you should always perform a complete diagnosis, this module is the primary solution for that specific code in the listed vehicles.
How is this different from a part from the local auto parts store?
A module from a standard auto parts store is a blank, unprogrammed unit. After installing it, you would still need to have your vehicle towed to a dealership or a qualified shop with expensive tools to have it programmed. Our service includes the professional programming, so the part arrives ready for a simple plug-and-play installation.
What happens if I forget to provide my VIN?
We cannot ship your order without a VIN. Our fulfillment process includes a mandatory programming step. If you complete your purchase without providing the VIN, our customer service team will contact you to retrieve it, which may delay your shipment.
Does this part fit models with an integrated trailer brake control?
As noted in the fitment data, this specific module is for vehicles WITHOUT the integrated trailer brake control option. Please verify your vehicle’s configuration before ordering to ensure compatibility.