End Your Stalling and No-Start Nightmares
Is your vehicle cranking but refusing to start? Experiencing sudden stalling, hesitation, or a persistent Check Engine Light? You’re likely dealing with a failed Fuel Pump Control Module (FPCM). This isn’t just an inconvenience; it’s a critical failure that leaves you stranded. This module is the definitive, hassle-free solution to get you back on the road with confidence. It arrives at your door completely programmed to your vehicle’s specific VIN, eliminating the need for an expensive trip to the dealership for programming. This is the smart, reliable fix for your GM vehicle.
Common Symptoms & Your Solution
A failing FPCM can mimic other fuel system problems, but it often triggers specific symptoms and diagnostic trouble codes (DTCs). If you’re experiencing any of the following, this module is the component you need:
- Engine cranks but will not start
- Vehicle starts and then immediately stalls
- Hesitation or sputtering during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes such as P069E, P0230, or U0109 (Loss of Communication with Fuel Pump Control Module)
Our Programmed 20964304 Fuel Pump Control Module is the direct answer to these issues, restoring precise fuel delivery and communication within your vehicle’s complex systems.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: We flash the module with the latest GM software using your VIN. This ensures perfect compatibility and function right out of the box.
- ✔ No Dealer Visit Required: Save hundreds of dollars and significant time by avoiding mandatory dealership programming. This is a true plug-and-play solution.
- ✔ Restores Peak Performance: By delivering the correct voltage to the fuel pump, this module restores lost power, smooths out acceleration, and improves starting reliability.
- ✔ Direct-Fit Replacement: Engineered to match the original factory part for a perfect fit and seamless installation on a wide range of GM trucks, SUVs, and cars.
- ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
An Expert’s Insight: The ‘No-Program’ Trap
“As a technician for over 20 years, I’ve seen countless vehicle owners and even some shops fall into the trap of buying a used or ‘new’ FPCM from a big-box store, only to find the vehicle still won’t start. That’s because these modules are not interchangeable without programming. They are locked to the original vehicle’s VIN. Our process completely bypasses that problem. By pre-programming the module to your VIN before it ships, we’re giving you the equivalent of a dealership-level repair at a fraction of the cost. You’re not just buying a part; you’re buying a complete, ready-to-install solution that saves you a tow, a day at the dealer, and a massive headache.”
Frequently Asked Questions
Why do I need to provide my VIN?
Your vehicle’s 17-digit Vehicle Identification Number (VIN) is essential. It allows us to load the exact, correct software and calibrations from GM for your specific make, model, and options. This step is what makes the module a true plug-and-play part and ensures it communicates correctly with your vehicle’s computer.
Is this part difficult to install?
For someone with basic mechanical skills, the installation is straightforward. The FPCM is typically located on the vehicle’s frame rail or in the rear quarter panel area. It involves disconnecting the battery, unplugging the electrical connectors, and unbolting the old module to replace it with the new one. Since our module is pre-programmed, no further steps are needed after installation.
Will this fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failure of this specific module. Replacing your faulty unit with our pre-programmed module is the correct and reliable fix for this code.
What happens if I forget to send my VIN after ordering?
We cannot ship your part until we receive your VIN, as the programming is a critical part of the order. Our customer service team will contact you via email to remind you. Promptly providing your VIN ensures your order is processed and shipped as quickly as possible.
How is this different from a module at a local auto parts store?
A module from a local store is a blank slate. It must be installed and then the vehicle must be taken to a dealership or a well-equipped shop to be programmed with specialized tools, adding significant cost and hassle. Our module arrives ready to install with all necessary programming already completed.