Restore Power and Reliability to Your GM Truck or SUV
Is your Silverado, Tahoe, or Sierra suddenly stalling, hesitating, or refusing to start? A faulty Fuel Pump Control Module (FPCM) is one of the most common culprits behind these frustrating and stressful issues. This module is the brain of your fuel system, and when it fails, it leaves you stranded. Get back on the road with confidence with this direct-fit, pre-programmed replacement module. We flash it with the latest official GM software using your vehicle’s VIN, ensuring it works perfectly right out of the box—no expensive trip to the dealership required.
Common Symptoms & Your Direct-Fit Solution
A failing FPCM can mimic other problems, but it often triggers specific symptoms and diagnostic trouble codes (DTCs). If you’re experiencing any of the following, this module is your definitive solution:
- Engine Stalling: The engine may cut out unexpectedly while driving or idling.
- Crank-No-Start: The engine turns over but will not fire up due to a lack of fuel pressure.
- Reduced Engine Power: Your vehicle may go into “limp mode,” with a warning message on the dash.
- Hesitation on Acceleration: The vehicle may stumble or lag when you press the gas pedal.
- Check Engine Light: Common codes include P069E, P0230, and P0606, often pointing directly to a fault in the FPCM or its circuit.
Don’t just replace the part—install the correct solution. Our Programmed 20850907 Fuel Pump Control Module is the smart, reliable fix that addresses these issues at their source.
Features & Benefits
- âś” Plug & Play Installation: This module arrives pre-programmed to your vehicle’s specific VIN. Simply install it and turn the key. No dealer programming, no special tools, no extra costs.
- âś” Updated GM Software: We load the newest software updates from General Motors, which often correct the very bugs that caused the original module to fail, ensuring long-term reliability.
- âś” Restored Performance: By delivering precise voltage to the fuel pump, this module restores crisp throttle response, smooth idling, and dependable starting.
- âś” Perfect OEM-Spec Fit: Engineered to match the original part’s dimensions and connections, guaranteeing a hassle-free installation on the frame rail or crossmember.
- âś” Purchase with Confidence: This unit is backed by our one-year replacement warranty.
An Expert’s Note: The Hidden Cost of a Bad FPCM
“I’ve seen it a hundred times. A customer’s truck won’t start, so they immediately replace the in-tank fuel pump—a tough, expensive job. A week later, the truck is back on the tow hook with the same problem. The real issue was the FPCM all along. These modules live on the vehicle’s frame, exposed to water, salt, and vibration, which leads to internal corrosion and failure. A Programmed 20850907 Fuel Pump Control Module not only fixes the root cause but also saves you from doing the wrong repair first. It’s the 15-minute fix that can save you hundreds of dollars and hours of frustration.”
By providing us with your VIN upon purchase, you empower us to deliver a component that is perfectly matched to your vehicle’s specific configuration. This critical step ensures all systems communicate correctly, from the engine computer to the fuel pump, giving you the reliable performance you depend on. Get your truck or SUV back to peak condition with this essential, pre-flashed module.
Frequently Asked Questions
Why does this module need to be programmed?
The Fuel Pump Control Module is a smart device that communicates with your vehicle’s main computer (ECU/PCM). Programming with your VIN ensures it has the correct software and parameters to operate seamlessly with your specific engine, transmission, and emissions equipment. An unprogrammed module will not work correctly.
How do I provide my Vehicle Identification Number (VIN)?
After you complete your purchase, simply send us a message with your 17-digit VIN. We cannot ship your order until we receive this information, as the programming process is the first step in preparing your part.
Where is the FPCM located on my vehicle?
On most compatible trucks and SUVs like the Silverado, Sierra, and Tahoe, the module is mounted to the driver’s side frame rail, typically above the spare tire. On other models, it may be on a rear crossmember or in the engine compartment. It is usually held in place by two or three small bolts.
Will this fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. While you should always verify the wiring and connectors are intact, replacing the module with this Programmed 20850907 Fuel Pump Control Module is the standard and most effective repair for this code.
Are all those part numbers on the list interchangeable?
Yes. GM has updated this part several times over the years. The part numbers listed (e.g., 13501024, 25967325, etc.) are all previous versions or equivalents that are directly replaced by this single, updated module. We will send you the correct, modern component programmed for your vehicle.