Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than a vehicle that won’t run right. Whether you’re stranded on the side of the road, experiencing sudden power loss in traffic, or simply can’t get your engine to turn over in the driveway, a faulty Fuel Pump Control Module (FPCM) is often the culprit. This critical component regulates the voltage sent to your fuel pump, ensuring your engine gets the precise amount of fuel it needs. When it fails, it can cause a host of maddening and potentially dangerous issues. This 20759945 Fuel Pump Control Module is the definitive, reliable solution to get you back on the road with confidence.
Common Symptoms of a Failing FPCM & Your Direct-Fit Solution
If you’re experiencing any of the following, a bad FPCM is the likely cause. This pre-programmed module is designed to resolve these issues permanently:
- Sudden engine stalling, especially while driving
- Engine cranks but will not start
- Hesitation or stumbling during acceleration
- Rough idling or inconsistent engine performance
- “Service Engine Soon” or Check Engine Light is illuminated
- Diagnostic Trouble Codes (DTCs) such as P069E, P0230, or P025A stored in the computer
Instead of paying for expensive diagnostic time and a separate programming fee at the dealership, our module arrives ready for installation. We flash it with the latest GM software updates using your vehicle’s VIN, ensuring perfect communication and function right out of the box.
Features & Benefits
- ✔ VIN-Programmed for You: We flash the module to your specific vehicle before shipping. This eliminates the need for expensive dealer tools or programming, saving you time and money.
- ✔ Plug-and-Play Installation: Because it’s pre-programmed, you can simply install the module, and your vehicle is ready to go. It’s a true bolt-in, plug-in fix.
- ✔ Restores Proper Fuel Delivery: Cures stalling, no-start, and hesitation issues by restoring precise control over the fuel pump’s operation.
- ✔ Updated GM Software: Programmed with the newest calibrations from General Motors to correct known factory issues and improve long-term reliability.
- ✔ Broad Compatibility: A direct replacement for a wide range of GM trucks and SUVs, matching multiple original part numbers including 13501024, 20850907, and 25967325.
- ✔ This unit is backed by our one-year replacement warranty.
Expert Mechanic’s Insight: We see these modules fail constantly in the shop. On most GM trucks and SUVs, the FPCM is mounted on the frame rail, completely exposed to road salt, water, and grime. Over time, moisture gets past the seals and corrodes the circuit board, leading to intermittent or total failure. The updated software we install helps the module manage electrical loads more effectively, which contributes to a longer service life than the original part. When you buy this pre-flashed 20759945 Fuel Pump Control Module, you’re not just replacing a part; you’re installing a more robust and reliable solution.
Frequently Asked Questions
Why do I need to provide my VIN?
Your vehicle’s Vehicle Identification Number (VIN) is required so we can program the 20759945 Fuel Pump Control Module with the exact software and calibrations for your specific model, year, and engine. This ensures it works perfectly as soon as it’s installed, without any additional programming.
Is this a true plug-and-play part?
Yes. Because we handle all the programming before we ship it to you, the installation process is simple. Once you locate and swap the old module with this new one, your vehicle is ready to drive. No dealer visit is required.
Where is this module located on my vehicle?
Location varies by model. On most GM trucks and large SUVs (like the Silverado, Sierra, Tahoe, Escalade), it’s mounted on the driver’s side frame rail, often near the spare tire. On other vehicles like the Saturn Vue, it can be found in the engine compartment. Always consult a service manual for your specific vehicle to confirm the exact location.
Will this fix a P069E trouble code?
Yes, the DTC P069E (Fuel Pump Control Module Commanded On) is one of the most common codes indicating a failure of this module. Replacing your old FPCM with this pre-programmed unit is the correct and definitive repair for this code.
What happens if I install a module that isn’t programmed?
An unprogrammed module will not communicate correctly with your vehicle’s other computers. This will typically result in a no-start condition and may set additional communication-related trouble codes, leaving you in the same situation as before.
How does the one-year replacement warranty work?
If the module fails within one year of the purchase date, we will provide a direct replacement. Simply contact our customer service with your order details to initiate the process.