Is Your GM Truck or SUV Stalling, Hesitating, or Refusing to Start?
There’s nothing more frustrating than a vehicle you can’t depend on. If you’re experiencing sudden engine stalls, long crank times, or a ‘Service Fuel System’ light on your dash, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. This isn’t just an inconvenience; it’s a critical failure that can leave you stranded. Get your vehicle back to full strength with our pre-programmed 20759945 Fuel Pump Control Module, the definitive solution for restoring reliability and performance to your GM vehicle.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can trigger a range of frustrating issues and diagnostic trouble codes (DTCs). This module is the specific fix for problems including:
- Engine stalling while driving, especially under load
- Vehicle cranks but will not start
- Hesitation or stumbling on acceleration
- Check Engine Light with codes like P069E, P0230, or P0627
- Reduced engine power or ‘limp mode’ activation
Instead of paying for expensive diagnostic time and dealership programming fees, this module arrives at your door ready for installation. We use your vehicle’s VIN to flash the unit with the latest, most stable software updates directly from GM. This ensures perfect communication with your vehicle’s computer and eliminates the common software glitches that caused the original part to fail. This is the smart, efficient way to get your truck or SUV running right again.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: No need for a trip to the dealer. This module is flashed with the latest GM software using your VIN for a true plug-and-play installation.
- ✔ Restores Dependable Starting: Eliminates the dreaded ‘crank-no-start’ condition caused by a failed fuel pump driver module.
- ✔ Cures Stalling & Hesitation: Regain smooth, consistent engine performance and acceleration by ensuring correct fuel pressure at all times.
- ✔ Solves Common DTCs: A direct solution for clearing persistent codes like P069E, which specifically points to an FPCM control circuit fault.
- ✔ Direct OEM Fitment: Designed to mount in the factory location with the original hardware and connectors, making replacement straightforward.
- ✔ Cost-Effective Repair: Save hundreds of dollars compared to the cost of a new part and programming labor at a dealership.
- ✔ This unit is backed by our one-year replacement warranty.
An Expert’s Insight: Why Programming is Non-Negotiable
As a technician, I’ve seen countless vehicle owners and even some shops make the mistake of installing a used or off-the-shelf FPCM without proper programming. The result is always the same: it doesn’t work. These modules are not one-size-fits-all. They are coded specifically to the vehicle’s operating system and fuel tank parameters. Installing an unprogrammed unit will, at best, do nothing, and at worst, cause erratic fuel pressure that can damage your fuel pump. Our process of programming this 20759945 Fuel Pump Control Module to your exact VIN isn’t just a convenience—it’s the only way to guarantee the repair is done correctly and will last.
Frequently Asked Questions
Why do I need to provide my VIN?
Your Vehicle Identification Number (VIN) is essential because it allows us to load the exact GM-specified software and calibrations for your truck or SUV’s engine, transmission, and fuel system. This step makes the module a true plug-and-play part and is critical for proper function.
Is this part difficult to install?
For most of the listed GM trucks and SUVs, the FPCM is located on the driver’s side frame rail and is accessible with basic hand tools. After disconnecting the battery, you simply unplug the electrical connectors, unbolt the old module, and install the new one. Since our unit is pre-programmed, no further steps are needed.
Will this fix a P069E trouble code?
Yes, the DTC P069E (‘Fuel Pump Control Module Commanded OFF’) is one of the most common codes indicating a failure of this exact module. Replacing your old FPCM with this pre-programmed unit is the definitive repair for this code.
Is this a new or used part?
This is a high-quality, inspected, and tested recycled OEM part. It is guaranteed to be fully functional and is programmed with the newest software available from GM to ensure optimal performance and longevity, often exceeding the reliability of the original part it replaces.
What happens if I don’t provide a VIN?
We cannot ship the module without a VIN. The programming is the most critical part of our service and ensures the part will work correctly in your vehicle. Please be sure to send us your 17-digit VIN after purchase to avoid delays.