Get Your Sierra Back on the Road with a Dependable BCM
Is your 2015 GMC Sierra 2500 suffering from frustrating and unpredictable electrical problems? Flickering lights, malfunctioning power windows and locks, or even a no-start condition can bring your work to a halt. These are classic signs of a failing Body Control Module (BCM). Instead of dealing with the high costs and programming headaches at a dealership, get the direct, reliable solution that gets your truck back in service. This is a fully programmed BCM, cloned from your original unit to ensure a seamless, plug-and-play installation.
Common BCM Failure Symptoms & Your Direct Solution
If your truck is experiencing any of the following, a faulty BCM is the likely culprit:
- Erratic or non-functional interior and exterior lights
- Power windows, door locks, or mirrors not working correctly
- Intermittent no-start or security system warning lights
- False warnings on the instrument cluster (e.g., “Service 4WD”)
- Communication error codes (U-codes) when scanned with a diagnostic tool
Our mail-in programming service provides a straightforward fix. We transfer the exact data from your original module to this replacement unit. This means the Programmed 2015 Sierra 2500 BCM arrives at your door ready to install, with no additional programming required.
Features & Benefits
- ✔ Plug & Play Installation: Because we clone your original module’s data, this BCM is ready to install right out of the box, saving you time and money.
- ✔ No Dealer Visit Needed: Avoid expensive dealership programming fees and scheduling delays. This is a complete, ready-to-go solution.
- ✔ Retains All Original Features: Your truck’s VIN, mileage, key data, and specific options are all preserved perfectly.
- ✔ Guaranteed Compatibility: This module is a direct replacement for part numbers 13592137, 13506935, 13506936, 13587704, and 13594764.
- ✔ Cost-Effective Repair: Get your truck fixed for a fraction of the cost of a new module and dealership labor.
- ✔ One-Year Protection: This unit is backed by our one-year replacement warranty.
Expert Insight: Why Our Cloning Service is the Smart Choice
As a technician, I’ve seen countless truck owners get stuck between a rock and a hard place with BCM failures. Buying a new, blank module from the dealer is just the first step; you then have to pay for hours of labor to have it programmed from scratch, a process that can sometimes fail or introduce new issues. Our cloning service bypasses that entire ordeal. We perform a direct, bit-for-bit data transfer, creating a perfect digital twin of your original module. This makes the replacement process as simple as swapping a battery and ensures your Programmed 2015 Sierra 2500 BCM works exactly as intended from the moment you plug it in.
Post-Installation Procedures
While our goal is a simple installation, some vehicles may require minor recalibration procedures after the BCM is replaced. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is on after installation, a “Setup SDM Primary Key in BCM” procedure may be needed using a professional-grade scan tool.
- Brake Pedal Position Relearn: A brake pedal position sensor recalibration might be necessary to ensure proper brake light and traction control functionality.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Frequently Asked Questions
How does this programming service work?
It’s simple. After you place your order, we will contact you with instructions to ship your original BCM to us. Once we receive it, we will clone all the necessary data to the replacement unit and ship it back to you, typically within 1-2 business days. You’ll receive tracking information as soon as it’s on its way.
Is this BCM truly plug and play?
Yes, after our cloning service is complete, the replacement BCM is 100% plug and play. It will have all your vehicle’s specific information, so you can simply install it and turn the key. No further programming is required.
Will I need to have my keys reprogrammed?
No. Because we are cloning your original module, all of your existing key data is transferred over. Your current keys will work immediately without any additional steps.
What if my airbag light comes on after installation?
In some cases, the new BCM needs to be synced with the airbag module (SDM). This is a simple procedure called “Setup SDM Primary Key in BCM” that can be performed by any competent repair shop with a professional diagnostic tool.
Which part numbers does this BCM replace?
This module is a direct replacement for several part numbers, including 13592137, 13506935, 13506936, 13587704, and 13594764. If your original BCM has one of these numbers, this is the correct part for you.
What is the total turnaround time?
The total time depends on shipping. Our in-house service time is very fast—we typically program and ship the replacement module within 24-48 hours of receiving your original unit. We then ship it back to you promptly.