Restore Your Charger’s Performance and Reliability
A stalling, sputtering, or non-starting Dodge Charger is more than an inconvenience; it’s a performance car silenced. If you’re dealing with frustrating engine problems, a faulty Engine Control Module (ECM) is often the hidden culprit. This Plug & Play ECM is the definitive solution, arriving at your door fully programmed to your vehicle’s specific VIN and mileage. It eliminates the guesswork and costly dealership visits, putting you back in control and back on the road with the power and responsiveness you expect from your 3.6L engine.
Common Symptoms & Your Solution
If your Charger, Challenger, or 300 is experiencing any of the following issues, a failing engine computer is a likely cause. This pre-programmed unit is designed to be the direct fix for these problems:
- Severe drop in fuel economy (MPG)
- Engine stalling or randomly shutting off
- Rough or erratic idling
- Failure to start, even with a good battery and starter
- Check Engine Light with communication error codes (e.g., U0100)
- Transmission shifting problems or harsh shifts
- Seemingly random sensor codes that persist after replacing the sensor
Instead of chasing electrical gremlins, solve the problem at its source. This 2015 Dodge Charger ECM is the central command unit for your engine, and our pre-programming service makes the replacement process as simple as possible.
Features & Benefits
- ✔ Effortless Installation: This is a true Plug & Play solution. We program the module to your specific VIN before shipping, so there is no need for an expensive trip to the dealership for flashing or key pairing.
- ✔ Guaranteed Compatibility: This unit is a direct replacement for a wide range of part numbers, ensuring it communicates flawlessly with your vehicle’s systems right out of the box.
- ✔ Restored Engine Performance: By replacing your faulty module, you’ll restore proper fuel delivery, ignition timing, and transmission communication, bringing back the smooth power your 3.6L engine is known for.
- ✔ Cost-Effective Repair: Avoid the high costs and wait times associated with dealership parts and programming. This is the smart, efficient way to get your car running right again.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
Expert Insight: We recently helped a customer with a 2015 Challenger 3.6L that had an intermittent no-start condition that stumped two different shops. They had replaced the battery and crank sensor, but the car would still randomly refuse to start. The issue was a hairline crack on the circuit board of the original ECM that would separate when the engine bay cooled down. Installing our pre-programmed 2015 Dodge Charger ECM provided an immediate, permanent fix. Pro-tip: Always disconnect the negative battery terminal for at least 15 minutes before swapping your ECM to allow all vehicle modules to fully power down.
Frequently Asked Questions
Is this ECM really Plug & Play?
Yes. We use the VIN you provide during checkout to flash the module with your vehicle’s exact software and security information. This means when you receive it, you simply install it, reconnect your battery, and the car will start and run correctly without any additional programming.
How do I provide my VIN and mileage?
After you place your order, you will be prompted to provide your vehicle’s VIN and current mileage. This information is critical for us to program the unit correctly for your car. We cannot ship the part until we have this information.
Will this fix communication errors or a ‘No Bus’ message?
In many cases, yes. The ECM is the primary hub for your vehicle’s data network. When it fails, it can cause a ‘No Bus’ or ‘Loss of Communication’ error on the dashboard, preventing the car from starting. This 2015 Dodge Charger ECM is often the solution for those specific issues.
What tools are needed for installation?
Installation is straightforward and typically only requires basic hand tools, such as a socket set and ratchet to remove the mounting bolts and disconnect the battery terminal. No special electronic equipment is needed.
Does this fit cars other than the Dodge Charger?
Yes, this engine control module is also compatible with the 2015 Dodge Challenger and 2015 Chrysler 300 models equipped with the 3.6L engine. Please verify your part number against the list provided to ensure a perfect match.