Restore Your Vehicle’s Electrical System with Confidence
Are you battling frustrating and unpredictable electrical problems in your Buick Regal? From flickering dashboard lights and erratic power windows to a vehicle that simply won’t start, a failing Body Control Module (BCM) can turn your comfortable ride into a source of daily stress. Stop guessing and replace the faulty component with a reliable, professionally programmed solution. This service provides a fully functional BCM, cloned from your original unit, ensuring a seamless, plug-and-play installation that gets you back on the road without an expensive trip to the dealership.
Common Symptoms & Your Solution
A faulty BCM can manifest in numerous ways, often leaving owners and even some mechanics confused. If you’re experiencing any of the following, our programmed BCM service is the definitive solution:
- Intermittent or non-working power windows, door locks, or interior lights.
- Erratic instrument cluster behavior or warning lights that come on for no reason.
- Problems with the vehicle’s security system or remote keyless entry.
- A no-start condition where the engine cranks but won’t turn over.
- Communication error codes (U-codes) stored in the vehicle’s diagnostic system.
By purchasing this service, you are getting a direct solution for your 2014-2017 Buick Regal BCM, restoring all these critical functions to factory specifications.
Features & Benefits
- ✔ Plug & Play Installation: We transfer all the critical data from your original module to this replacement unit. This means no complicated or expensive dealership programming is required upon installation.
- ✔ Cost-Effective Repair: Avoid the high costs of a new BCM and the associated programming fees charged by dealerships. Our service provides a complete solution at a fraction of the price.
- ✔ Retains Original Keys: Our cloning process ensures your existing keys, VIN, and vehicle-specific settings are perfectly matched, just like the original.
- ✔ Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, ensuring it’s the right fit for your vehicle. (See list below).
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
Expert Insight: Why Our Cloning Service is the Smart Choice
When a Body Control Module fails, simply swapping it with a used one from another vehicle won’t work. The BCM is the central hub for your car’s electronics, security, and options. It’s programmed specifically to your car’s Vehicle Identification Number (VIN). Our professional cloning service is the gold standard for replacement. We perform a full data transfer, essentially making the replacement module an exact electronic twin of your original. This preserves the intricate handshake between the BCM, engine computer, and anti-theft system, which is why our solution is truly plug-and-play and avoids the common pitfalls of BCM replacement.
Simple 3-Step Process
- Purchase: Complete your order. Ensure your contact information is accurate.
- Ship: We will contact you with simple instructions for shipping your original BCM to our facility.
- Install: Once we receive your module, we will program the replacement and ship it back to you, typically within 1-2 business days. You’ll receive a tracking number, and your part will arrive ready for installation.
Fitment and Part Number Compatibility
This computer will fit the following part numbers: 13580698 13578458 13589115 13589637 13590173 13590851 13591300 13592376 13593775 13593776 13594564
This part will fit these makes and models with these options:
This professionally programmed 2014-2017 Buick Regal BCM is also compatible with:
- LACROSSE 14-15 Body Control (BCM); (LH kick panel)
- LACROSSE 16 Body Control (BCM); (LH kick panel), ID 13580698 or 13594564
- MALIBU 14-15 Body Control (BCM); (LH kick panel)
- MALIBU 16 Body Control (BCM); VIN 1 (4th digit, Limited), (LH kick panel)
- VOLT 14-15 Body Control (BCM); (RH engine compartment)
- ELR 14-16 Body Control (BCM); (RH cowl)
- CAMARO 14 Body Control (BCM); (RH dash), Conv
- CAMARO 15 Body Control (BCM); (RH dash)
- SRX 14-16 Body Control (BCM); (LH dash)
- SPARK 14-16 Body Control (BCM); (left lower a-pillar), electric model (EV)
Important Post-Installation Information
In some cases, additional vehicle-specific relearn procedures may be required after installation. These are simple procedures for a qualified technician with a professional scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, the ‘Setup SDM Primary Key in BCM’ procedure will need to be performed to sync the systems.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be necessary to ensure proper brake light and traction control function.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
How does the cloning process work?
You ship your original BCM to us. Our technicians use specialized equipment to read the unique data—including your VIN, key information, and vehicle options—and write it directly onto the replacement module. This makes the new module an exact electronic copy of the original.
Is this module truly “plug and play”?
Yes, in over 95% of cases. Because we clone your original data, the vehicle recognizes the replacement module as its own, eliminating the need for dealer programming. In rare instances, a minor relearn procedure like for the brake pedal sensor may be needed, which is a simple task for any competent mechanic.
What happens if I don’t send my original BCM?
This service cannot be completed without your original module. The data from your old BCM is absolutely essential to program the replacement unit to work with your specific vehicle. An order cannot be fulfilled without it.
How long does the service take?
Once we receive your original module, our programming service is typically completed within 1-2 business days. We then ship the programmed replacement back to you. You will receive a tracking number as soon as it ships.
Will this fix my specific electrical problem?
This part is a solution for a failed Body Control Module. While the symptoms listed are very common for BCM failure, we always recommend having a professional diagnosis performed by a qualified technician to confirm the BCM is the root cause of your issue before ordering.
What if the airbag light comes on after installation?
This is not a sign of a defective part. It simply means the BCM and the airbag module (SDM) need to be electronically re-introduced. A technician with a capable diagnostic tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the systems and turn off the light.