Restore Your Vehicle’s Power and Reliability
Is your 2013-2014 Chevrolet Sonic experiencing frustrating issues like stalling at stoplights, hesitating during acceleration, or refusing to start altogether? Before you consider replacing the entire fuel pump assembly, the culprit is often a faulty Fuel Pump Control Module (FPCM). This essential component, also known as a Fuel System Control Module (FSCM), is responsible for precisely managing the voltage sent to your fuel pump. When it fails, it can cause a host of intermittent and confusing drivability problems that can leave you stranded.
A Technician’s Notebook
I recently had a 2014 Cruze in the bay with a classic complaint: it would run fine for days, then suddenly stall and refuse to restart for an hour. The owner had already replaced the fuel pump, but the problem persisted. A scan showed a U0109 (Lost Communication with Fuel Pump Control Module) and a P069E (Fuel Pump Control Module Requested MIL Illumination) code. Instead of throwing more parts at it, we inspected the FPCM. These modules are notorious for internal electronic failure. We installed a VIN-programmed module, and the car has been running perfectly ever since. It’s a textbook example of how diagnosing the control side of the circuit saves time and money.
Is Your Vehicle Showing These Symptoms?
- ✔ Engine stalling, especially when coming to a stop or at idle
- ✔ Difficulty starting or a no-start condition
- ✔ Engine hesitation or stumbling during acceleration
- ✔ Inconsistent or poor engine performance
- ✔ Reduced fuel economy
- ✔ Check Engine Light with codes like P069E, P025A, P2635, or U0109
The Plug-and-Play Solution You Need
This isn’t just a replacement part; it’s a complete, ready-to-install solution. The biggest hurdle with replacing modern electronic modules is the need for expensive programming at a dealership. We eliminate that step entirely. When you purchase this 2013-2014 Sonic Fuel Pump Module, you provide us with your vehicle’s VIN. Our technicians will then program the module with the latest, most stable software updates directly from GM. This ensures perfect compatibility and optimal performance right out of the box. You receive a part that is truly plug-and-play, saving you hundreds of dollars in dealer fees and diagnostic time.
A Straightforward Guide to Installation
- ✔ Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
- ✔ Locate the Module: On most compatible vehicles, including the Sonic, the FPCM is located inside the vehicle, behind the right-hand (passenger side) rear quarter panel trim. You may need to remove some plastic panels or carpeting to access it.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old module. Then, unbolt the module from its mounting point.
- ✔ Install the New Module: Bolt your new, pre-programmed module into place. Securely plug in the electrical connectors, making sure they click into place.
- ✔ Final Steps: Reinstall any trim panels you removed. Reconnect the negative battery terminal. Start the vehicle and allow it to idle for a few minutes to confirm the repair.
Verified Vehicle Compatibility
This module, part number 22874300 (also compatible with 22874299), is a direct-fit replacement for a wide range of GM vehicles. Please verify your model and options below:
- 2014 Chevrolet Camaro: (Fuel Pump; quarter panel behind right hand door), 3.6L (VIN 3) or 6.2L (VIN J)
- 2014 Chevrolet Caprice: (Fuel Pump)
- 2013-2014 Chevrolet Cruze: (Fuel Pump; RH inner quarter panel), ID 22874300
- 2013-2014 Chevrolet Sonic: (Fuel Pump; RH inner quarter panel)
- 2013-2014 Chevrolet Volt: (Fuel Pump; RH inner quarter panel)
- 2014 Chevrolet Impala: (Fuel Pump; VIN 1, new style, RH rear quarter panel)
- 2013-2014 Chevrolet Trax: (Fuel Pump; RH inner quarter panel)
- 2013-2014 Cadillac XTS: (Fuel Pump; right rear quarter panel)
- 2013-2014 Buick Verano: (Fuel Pump; RH inner quarter panel)
- 2013-2014 Buick Encore: (Fuel Pump; RH inner quarter panel)
- 2013 Chevrolet Orlando: (Fuel Pump; RH inner quarter panel)
Frequently Asked Questions
Why do I need to provide my VIN?
Your vehicle’s VIN allows us to program the module with the specific software and calibrations for your car’s exact configuration. This ensures seamless communication with your car’s computer (ECU) and prevents compatibility issues, making it a true plug-and-play installation.
Is this a difficult part to install myself?
For most DIY enthusiasts with basic tools, this is a very manageable job. The module is typically accessed by removing interior trim panels. Our pre-programming service eliminates the most difficult part—the software flashing—which would otherwise require a trip to the dealer.
What does the Fuel Pump Control Module do?
The FPCM acts as a smart controller for your fuel pump. Instead of the pump running at full speed all the time, the FPCM varies the voltage based on engine demand. This improves efficiency and extends the life of the fuel pump. When it fails, it can’t deliver the correct voltage, leading to stalling and performance problems.
Will this fix a P069E check engine light code?
Yes, a P069E code is one of the most common diagnostic trouble codes pointing directly to a fault within the Fuel Pump Control Module. Replacing a failed module with this pre-programmed unit is the correct and reliable fix for this code.
Is this part number 22874300 compatible with 22874299?
Yes, part number 22874300 is a fully compatible and updated replacement for the earlier part number 22874299.