Experiencing Frustrating Electrical Problems in Your GM Vehicle?
Is your car suffering from a mind of its own? Unpredictable power windows, flickering dashboard lights, malfunctioning door locks, or even a no-start condition can all point to a failing Body Control Module (BCM). These issues are more than just an annoyance; they can compromise your vehicle’s safety and reliability. This isn’t just a partโit’s the solution to restore order and get your daily drive back to normal.
Common BCM Failure Symptoms & Your Solution
A faulty BCM can create a cascade of confusing problems. You might be experiencing:
- Intermittent or non-working power windows, locks, and interior lights.
- Erratic behavior from your gauges or instrument cluster.
- Security system faults or the vehicle refusing to start.
- Communication error codes (U-codes) when scanned.
- Warning lights that stay on for no apparent reason.
Our professional cloning service for this 2013-2014 Chevrolet Orlando BCM provides a direct and permanent fix. We transfer the unique, vehicle-specific data from your original BCM to this replacement unit. The result is a true plug-and-play module that requires no expensive trip to the dealership for programming.
Features & Benefits
- โ Simple Plug-and-Play Installation: Because we clone your original module’s data, this BCM is ready to install right out of the box. No additional programming or calibration is required.
- โ A Smart, Cost-Effective Repair: Avoid the high costs and scheduling hassles of a dealership service department. This is a direct, affordable solution to get you back on the road.
- โ Guaranteed Vehicle Compatibility: By transferring your factory data, we ensure the replacement BCM communicates perfectly with your vehicleโs engine computer, keys, and other electronic modules.
- โ No Core Charge, No Hassle: You are not required to return your original part after installation. Keep it for your peace of mind.
- โ One-Year Replacement Protection: This unit is backed by our one-year replacement warranty.
Expert Insight: Why Our Cloning Service is the Right Choice
Think of the BCM as your car’s central nervous system. It manages everything from your turn signals to the anti-theft system. This module contains critical security information that is unique to your vehicle’s Vehicle Identification Number (VIN). That’s why you can’t just swap in a used BCM from another carโit won’t recognize your keys or other systems. Our cloning process meticulously copies this essential data, creating a seamless replacement that your car accepts as its own. It’s the most reliable way to fix a failed BCM without introducing new electronic conflicts.
How Our Simple Mail-In Service Works
- Place Your Order: Complete your purchase through our secure checkout.
- Receive Instructions: We will contact you via email or phone with clear, simple instructions on how to remove and ship your original BCM to our facility.
- We Perform the Service: Once we receive your module, our technicians will expertly transfer all the necessary data to the replacement 2013-2014 Chevrolet Orlando BCM. This process typically takes 1-2 business days.
- Receive Your Ready-to-Install Part: We ship the programmed module back to you. Simply install it, reconnect your battery, and enjoy your fully functional vehicle!
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a relearn procedure after the BCM is replaced. Please be aware of the following possibilities:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed by a technician with a professional scan tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
This replacement 2013-2014 Chevrolet Orlando BCM is compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options
EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697
CRUZE 14-15 Body Control (BCM); (LH kick panel)
ENCORE 13-14 Body Control (BCM); (LH side of dash)
MALIBU 13 Body Control (BCM); (LH kick panel)
REGAL 13 Body Control (BCM); (LH dash)
SRX 13 Body Control (BCM); (LH dash)
SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
ORLANDO 13-14 Body Control (BCM); (below center console)
VERANO 13-17 Body Control (BCM); (below center of dash)
CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
TRAX 13-14 Body Control (BCM); (LH side of dash)
VOLT 13 Body Control (BCM); (RH engine compartment), ID 13586273
CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
Frequently Asked Questions
What exactly does a Body Control Module (BCM) do?
The BCM is a computer that controls and monitors many of your vehicle’s non-engine-related functions. This includes power windows, door locks, interior and exterior lighting, the security system, and the instrument cluster, among other things.
How does the mail-in cloning service work?
After you place your order, you will ship your original BCM to us. We use specialized equipment to read the unique programming and security data from your module and write it onto the replacement unit. We then ship the newly programmed module back to you, ready for installation.
Will I need to have a dealer program this BCM?
No. The entire point of our cloning service is to eliminate the need for dealer programming. Because the replacement module contains your car’s original data, it will be recognized by the vehicle’s other computers, making it a true plug-and-play solution.
Why can’t I just use a BCM from a junkyard?
A BCM from another vehicle is programmed with that vehicle’s specific VIN and security information. Installing it in your car will cause a mismatch, leading to a no-start condition, security system lockouts, and other electronic conflicts. Our service avoids all these issues.
What if the airbag light comes on after I install it?
This can happen occasionally. It means the new BCM needs to be electronically ‘introduced’ to the airbag system’s Supplemental Restraint System (SRS) module. A qualified technician with a professional-grade scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the systems and turn off the light.
How long does the entire process take?
The service at our facility typically takes 1-2 business days once we receive your original module. The total time will depend on shipping times to and from our location. We will provide you with a return tracking number as soon as your module is on its way back to you.