Restore Your Vehicle’s Electrical System with Confidence
Are you battling frustrating electrical gremlins in your truck or SUV? Flickering lights, unresponsive power windows, a malfunctioning key fob, or persistent security system alerts are all classic signs of a failing Body Control Module (BCM). This vital component is the central hub for your vehicle’s body electronics, and when it falters, it can make your daily drive a nightmare. This pre-programmed BCM is the definitive, hassle-free solution to restore your vehicle to its peak operational state.
Common Symptoms & Your Solution
If you’re experiencing any of the following issues, a faulty BCM is the likely culprit:
- Power windows, door locks, or mirrors working intermittently or not at all.
- Interior or exterior lights behaving erratically (staying on, not turning on, or flickering).
- The security system engaging randomly or showing a ‘Service Theft System’ message.
- Keyless entry remote failing to lock or unlock the doors.
- Instrument cluster warning lights illuminating without a clear cause.
- In severe cases, a no-start condition where the vehicle fails to crank.
This module is the direct answer to those problems. We program it specifically to your vehicle’s VIN before shipping, ensuring it integrates seamlessly with your existing systems. By purchasing this module, you are getting a reliable fix that bypasses the time, cost, and complexity of a dealership visit. The core of your vehicle’s convenience and security features will be fully restored, giving you confidence every time you get behind the wheel. For a precise solution, this 2012-2013 Escalade EXT BCM 22737275 is engineered to meet or exceed original specifications.
Features & Benefits
- โ Plug & Play Installation: This BCM arrives pre-programmed to your vehicle’s unique VIN. No expensive dealer programming or special tools are required.
- โ Restored Functionality: Get your power windows, locks, lights, and security systems working like new again.
- โ Latest GM Software: We flash each module with the newest, most stable software updates from GM to ensure optimal performance and long-term reliability.
- โ No Core Charge: Keep your old module. There’s no need to worry about the cost or hassle of sending a core back to us.
- โ Direct-Fit Replacement: This unit is a direct replacement for part numbers 22737275, 22846365, and 22846364, guaranteeing a perfect fit.
- โ Peace of Mind Protection: This unit is backed by our one-year replacement warranty.
Expert Insight: The Junkyard Gamble vs. A Programmed Solution
As a technician, I’ve seen many owners try to save a few dollars by pulling a BCM from a salvage yard. The problem is that a used BCM is a locked box, coded specifically to the donor vehicle’s VIN and options. Installing it in your truck will, at best, not work correctly, and at worst, can create a cascade of new electronic conflicts. Our solution eliminates that gamble. By programming the 2012-2013 Escalade EXT BCM 22737275 to your exact VIN, we deliver a module that your vehicle recognizes as its own, ensuring all systems communicate correctly from the moment of installation.
Vehicle Fitment Information
This Body Control Module is compatible with a wide range of GM trucks and SUVs. It is a direct replacement for modules with part numbers 22737275, 22846365, or 22846364. Please verify your part number before ordering.
- Cadillac Escalade / ESV / EXT: 2012-2014
- Chevrolet Avalanche 1500: 2012-2013
- Chevrolet Silverado 1500 / 2500 / 3500: 2012-2014
- Chevrolet Suburban 1500 / 2500: 2012-2014
- Chevrolet Tahoe: 2012-2014
- GMC Sierra 1500 / 2500 / 3500 (including Denali): 2012-2014
- GMC Yukon / Yukon XL (including Denali): 2012-2014
Important Post-Installation Procedures
To ensure a smooth installation, please be aware of these potential follow-up steps. While not always required, they are common for BCM replacements on these platforms.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: A brake pedal position sensor recalibration may be necessary to ensure proper brake light operation and traction control performance.
Disclaimer: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance. Getting a reliable fix for your vehicle with the 2012-2013 Escalade EXT BCM 22737275 is our top priority.
Frequently Asked Questions
Why do you need my VIN?
Your Vehicle Identification Number (VIN) is essential because it allows us to program the BCM with the specific software and settings for your truck’s exact features and options. This is what makes the installation plug-and-play and ensures everything works correctly.
Is this BCM difficult to install?
The BCM is typically located under the steering column. Physical installation is straightforward for someone with basic mechanical skills, usually involving removing a few trim panels and disconnecting electrical connectors. The main benefit of our product is that the complex programming is already done for you.
Do I need to return my old BCM?
No. This product comes with no core charge, so you are free to keep your original module. This simplifies the process for you, with no return shipping or core deposits to manage.
What happens if my airbag light comes on after installation?
This is a known possibility. The new BCM needs to be electronically ‘introduced’ to your vehicle’s airbag module (SDM). A qualified technician with a professional-grade scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure in a few minutes to resolve this.
Will this fix my specific electrical problem?
The BCM controls a vast number of electronic functions. The symptoms listed in our description are the most common indicators of a failing BCM. If your vehicle is experiencing one or more of these issues, this module is the most probable solution. Proper diagnosis is always recommended.