Programmed 2011 Sierra 3500 ECM | 12656958 | Plug & Play

Get Your Truck Back to Work, Fast.

Don’t let a faulty ECM keep your truck sidelined. This engine computer comes fully programmed to your VIN, ensuring a perfect, hassle-free installation. Restore your truck’s power, reliability, and fuel efficiency. Stop worrying and start working. Order your direct-fit replacement now!

$128.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-02473-22 Categories: ,
Guaranteed Safe Checkout

Get Your Hard-Working Truck Back on the Road

When your 2011 Sierra 3500, Silverado, or other compatible GM truck is down, the job stops. A faulty Engine Control Module (ECM) can cause a cascade of frustrating issues, from a no-start condition to poor performance that costs you time and money. This isn’t just a part; it’s the solution to getting your vehicle’s brain back in perfect working order. We provide a reliable, professionally prepared programmed 2011 Sierra 3500 ECM that is flashed with the latest GM software updates specifically for your truck using its unique VIN.

Common Symptoms & Your Solution

If you’re experiencing any of the following, a failing ECM is the likely culprit:

  • Engine cranks but refuses to start.
  • Stalling, rough idling, or misfiring.
  • A persistent Check Engine Light with no obvious cause.
  • Noticeable decrease in fuel economy and engine power.
  • Communication errors with diagnostic scan tools (U-codes).
  • Erratic automatic transmission shifting.

This module is the definitive solution. By programming it directly to your vehicle’s VIN, we eliminate the guesswork and the need for an expensive trip to the dealership for further programming. It’s designed to be a direct-fit, plug-and-play fix to restore your truck’s factory performance and dependability.

Features & Benefits

  • ✔ VIN-Programmed for Your Truck: We flash the module with your vehicle’s specific VIN, ensuring it works seamlessly with your existing systems right out of the box.
  • ✔ Plug & Play Installation: No need for additional, costly programming at a dealership. Simply install the unit and your truck is ready to go.
  • ✔ Latest GM Software: Your ECM arrives with the most current vehicle software from General Motors, optimizing engine efficiency, performance, and emissions.
  • ✔ Cost-Effective Solution: Get your truck running right without the high costs and scheduling hassles of a dealership service center.
  • ✔ Broad Compatibility: A direct replacement for part numbers 12616532, 12642100, and 12656958, fitting a range of GM trucks and even the 1.4L Chevy Cruze.
  • ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty.

From the Shop Floor: The Importance of a VIN-Matched Module

“We had a contractor bring in his 2011 Silverado 2500 that had been to two other shops. It had a persistent rough idle and would randomly lose power under load—a major problem when you’re hauling heavy equipment. The previous shops had replaced sensors and plugs, but the issue remained. They had overlooked the generic, non-programmed ECM someone had installed. We installed a correctly programmed 2011 Sierra 3500 ECM matched to his VIN, and the truck immediately ran like it just rolled off the factory floor. Don’t underestimate this step; it’s the difference between a temporary patch and a permanent fix.”

Frequently Asked Questions

What do I need to do after I place my order?

After you complete your purchase, you must provide us with your vehicle’s 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive the VIN, as we use it to program the module specifically for your truck.

Is this really a ‘plug and play’ part?

Yes. Because we program the ECM to your VIN before shipping, it is ready for installation upon arrival. In most cases, no additional programming or dealer visit is required. A security relearn procedure may be necessary, which is a simple process you can typically do yourself in about 15 minutes.

Where can I find my VIN?

Your VIN can be found on a metal plate on the driver’s side of the dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.

Will this computer fix my transmission shifting problems?

In many modern vehicles, the ECM works with the Transmission Control Module (TCM) to control shifting. If the ECM is sending faulty data, it can cause poor shifting performance. While this part can resolve such issues, transmission problems can also stem from the TCM or mechanical failures. This part will fix any issue directly caused by a faulty ECM.

How can I be sure this fits my vehicle?

This module fits the models listed in the description, including the 2011 Sierra/Silverado 2500/3500 with the 6.0L engine and the 2011 Cruze with the 1.4L engine. It is a direct replacement for part numbers 12616532, 12642100, and 12656958. Providing your VIN during checkout ensures we program it for a perfect match.

Genuine OEM

Yes

Year

Condition

Refurbished

MPN

12656958

Brand

GM

Year

2011

Model

SIERRA 3500

Hardware Type

Manufacturer Part Number

Interchange part number

Scroll to Top