Programmed 2011 Caprice Engine Module 12617568 | VIN-Matched & Ready to Install

Get Your Vehicle Running Right Again

This is a direct-fit Engine Control Module for your 2011 Caprice and other GM models, pre-programmed to your vehicle’s VIN. It solves common issues like stalling, check engine lights, and poor performance. Order today for a simple, plug-and-play solution!

$122.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00882-58 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance and Reliability to Your Vehicle

Are you battling a persistent check engine light, erratic engine behavior, or frustrating no-start conditions in your vehicle? A failing Engine Control Module (ECM) can be the hidden culprit, disrupting communication between critical systems and leaving you stranded. This isn’t just an inconvenience; it’s a compromise on your vehicle’s safety and your peace of mind. Take back control with this professionally programmed ECM, designed to be the definitive solution to your engine management woes.

This module arrives at your doorstep fully flashed with the latest GM software updates, specifically tailored to your vehicle’s unique Vehicle Identification Number (VIN). This crucial step eliminates the need for an expensive trip to the dealership for programming. It’s a direct-fit, plug-and-play solution that restores your engine’s original performance, efficiency, and smooth operation. Imagine a confident, worry-free drive again—that’s the promise of a properly functioning engine computer.

Warning Signs and How to Overcome Them

If your vehicle is experiencing any of the following, a failing ECM could be the cause. Replacing it with our pre-programmed unit is the most effective way to solve these issues for good:

  • ✔ Check Engine Light (CEL): Particularly for internal module failure codes like P0601, P0602, P0606.
  • ✔ Engine Performance Problems: Stalling, hesitation, poor acceleration, or reduced fuel economy.
  • ✔ Intermittent or No-Start Conditions: The engine cranks but refuses to start, or starts unreliably.
  • ✔ Communication Errors: Loss of communication with other vehicle modules, often indicated by U-codes.
  • ✔ Erratic Transmission Shifting: The ECM plays a key role in communicating with the transmission controller.

A Technician’s Tale: The Ghost in the Machine

“I once had a 2008 Sierra 2500 in the shop that was driving its owner crazy. It would run perfectly for days, then suddenly stall at a red light and refuse to restart for an hour. No consistent codes, just pure frustration. We checked everything—fuel pressure, spark, sensors. Finally, we monitored the ECM’s internal processor activity and saw it was dropping out intermittently. We installed a VIN-programmed module just like this one, and the ‘ghost’ was gone. It’s a reminder that the ECM is the brain, and when it glitches, the symptoms can be maddeningly inconsistent.”

Guided Installation for a Confident Repair

You don’t need to be a master mechanic to complete this installation. With basic tools and a little patience, you can have your vehicle running smoothly again. Follow these steps for a successful replacement.

  1. Safety First: Begin by disconnecting the negative terminal from your vehicle’s battery. This prevents any electrical shorts and resets the vehicle’s systems.
  2. Locate the Old Module: Find the existing ECM. On many of the listed trucks and SUVs, it’s located under the battery tray on the driver’s side. On cars, it may be near the firewall or air filter box.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be released. Once disconnected, unbolt the module from its mounting bracket.
  4. Install the New Unit: Mount your new, pre-programmed ECM in place of the old one. Securely reconnect the wiring harnesses, ensuring they click firmly into place.
  5. Power Up: Reconnect the negative battery terminal and tighten it securely.
  6. Final Steps: In many cases, the vehicle will start and run immediately. However, some vehicles may require a security or anti-theft relearn procedure, which can typically be done without special tools. Consult your owner’s manual or a reliable online resource for your specific model’s procedure.

Guaranteed Compatibility for Your Vehicle

This 2011 Caprice Engine Module is also a direct replacement for a wide range of GM vehicles. Please verify your model and options below. This module is compatible with part numbers 12612384, 12622141, and 12617568.

This part will fit these makes and models with these options
EQUINOX 08-09 Electronic Control Module; (LH engine compartment), 3.4L
SIERRA 2500 PICKUP 08 Electronic Control Module; (LH front under battery), 6.0L
SUBURBAN 1500 08 Electronic Control Module; (LH front under battery)
AVALANCHE 1500 08 Electronic Control Module; (LH front under battery)
SUBURBAN 2500 08 Electronic Control Module; (LH front under battery)
TORRENT 08-09 Electronic Control Module; (LH engine compartment), 3.4L
VUE 08-09 Electronic Control Module; 3.5L
AURA 08 Electronic Control Module; (RH firewall), 3.5L
SIERRA 3500 PICKUP 08 Electronic Control Module; (LH front under battery), 6.0L
CTS 08 Electronic Control Module; (RH front engine compartment), (3.6L), VIN 7 (8th digit), ID 12612384
CAPRICE 11 Electronic Control Module; ID 12612384
SIERRA DENALI 08 Electronic Control Module; (LH front engine compartment)
ESCALADE EXT 08 Electronic Control Module; (LH front under battery)
EXPRESS 3500 VAN 08 Electronic Control Module; (LH rear engine compartment), gasoline
G6 08 Electronic Control Module; (LH front engine compartment), 3.5L
HUMMER H2 08 Electronic Control Module; (LH front under battery)
EXPRESS 1500 VAN 08 Electronic Control Module; (LH rear engine compartment), 5.3L
MALIBU 08 Electronic Control Module; classic style (emblem in grille), 3.5L
SAVANA 1500 VAN 08 Electronic Control Module; (LH rear engine compartment), 5.3L
CORVETTE 08 Electronic Control Module; (RH engine compartment)
CORVETTE 09 Electronic Control Module; (RH engine compartment), Z06
IMPALA 08 Electronic Control Module; (lower part of air cleaner box), 3.9L
SILVERADO 1500 PICKUP 08 Electronic Control Module; (LH front under battery), w/o 4.3L
YUKON 08 Electronic Control Module; (LH front under battery), w/o hybrid option
EXPRESS 2500 VAN 08 Electronic Control Module; (LH rear engine compartment), gasoline
SILVERADO 2500 PICKUP 08 Electronic Control Module; (LH front under battery), 6.0L
YUKON XL 2500 08 Electronic Control Module; (LH front under battery)
SILVERADO 3500 PICKUP 08 Electronic Control Module; (LH front under battery), 6.0L
G6 08 Electronic Control Module; (LH front engine compartment), 3.9L
SAVANA 3500 VAN 08 Electronic Control Module; (LH rear engine compartment), gasoline
SIERRA 1500 PICKUP 08 Electronic Control Module; (LH front under battery), w/o 4.3L
TAHOE 08 Electronic Control Module; (LH front under battery), w/o hybrid option
MALIBU 08 Electronic Control Module; new style (emblem in bumper cover), 3.5L
SAVANA 2500 VAN 08 Electronic Control Module; (LH rear engine compartment), gasoline
ESCALADE ESV 08 Electronic Control Module; (LH front under battery)
ESCALADE 08 Electronic Control Module; (LH front under battery)
IMPALA 08 Electronic Control Module; (lower part of air cleaner box), 3.5L
YUKON XL 1500 08 Electronic Control Module; (LH front under battery)

Frequently Asked Questions

How do I provide my VIN for programming?

After you complete your purchase, you will receive an email with instructions. You can simply reply to that email with your 17-digit VIN, or include it in the ‘notes to seller’ section during checkout.

Is any additional programming required after installation?

Our service covers the main engine programming. However, some GM vehicles require a simple, key-on/key-off Security Relearn or Crankshaft Position Sensor Relearn procedure after installation. These can typically be performed without any special scan tools.

Is this a brand new part?

This is a high-quality, fully tested OEM component that has been verified to meet or exceed original factory specifications. We guarantee its function and provide it with the latest software for your vehicle.

Will this fix my specific problem?

This module is a direct solution for issues caused by a faulty ECM, such as internal processor faults (P0601) or communication errors. While it solves many common problems, we always recommend a proper diagnosis by a qualified mechanic to ensure you are replacing the correct part.

What if my original part number is not listed?

The part numbers 12612384, 12622141, and 12617568 are often interchangeable for the listed applications. As long as your vehicle is on the compatibility list, this module will be programmed to work perfectly, regardless of which of these three part numbers was originally installed.

Genuine OEM

Yes

Year

Condition

Refurbished

MPN

12617568

Interchange part number

Type

E38

Model

CAPRICE

Year

2008

Brand

GM

Manufacturer Part Number

, ,

Scroll to Top