Restore Your Yukon’s Electrical System with Confidence
Are you battling frustrating electrical gremlins in your GMC Yukon XL? Flickering lights, unresponsive power windows, a security system that acts on its own, or strange warning messages on the dash are all classic signs of a failing Body Control Module (BCM). This component is the central command center for your truck’s body electronics, and when it falters, it can make your reliable family hauler feel unpredictable. This isn’t just an annoyance; it’s a matter of convenience and safety. We offer the definitive solution: a replacement BCM, professionally programmed to your vehicle’s specific VIN before it ever leaves our facility.
Common Symptoms & Your Direct-Fit Solution
A faulty BCM can cause a wide range of issues that seem unrelated. If you’re experiencing any of the following, this module is the solution you need:
- Intermittent or non-working power windows, door locks, and interior lights.
- Erratic instrument cluster behavior or warning lights.
- Problems with the anti-theft or keyless entry systems.
- HVAC (heating and air conditioning) control issues.
- Communication error codes (U-codes) when scanned with a diagnostic tool.
Instead of paying for expensive diagnostics and programming fees at a dealership, our pre-programmed 2010 Yukon XL 1500 Body Control Module arrives ready for a more straightforward installation, restoring the full functionality you depend on every day.
Features & Benefits
- ✔ VIN-Programmed for Your Truck: We flash the module with the latest GM software using your vehicle’s VIN. This critical step ensures seamless communication with your truck’s other computers, saving you a trip to the dealer.
- ✔ Restores Full Functionality: Get your power accessories, security system, and interior convenience features working correctly again.
- ✔ Simple Core Policy: There is no core charge. You are not required to send your old, faulty module back to us.
- ✔ Direct-Fit Replacement: Engineered to be a perfect match for the original BCM, ensuring a proper fit and connection for a wide range of GM vehicles.
- ✔ Peace of Mind Protection: This unit is backed by our one-year replacement warranty.
Expert Insight: The Brains of Your Truck’s Body
Think of the BCM as the central nervous system for everything you interact with inside your Yukon’s cabin. It’s not just a fuse box; it’s a sophisticated computer that manages communication between dozens of switches, sensors, and other modules. From the simple chime when you leave your lights on to the complex logic of the anti-theft system, the BCM is in charge. That’s why simply swapping a used module from another vehicle won’t work—it’s not programmed to recognize your truck’s unique identity and options. Our VIN-programming service makes this a reliable, vehicle-specific solution.
After Installation: Important Next Steps
While this module is programmed for your VIN, some vehicle systems may require a relearn or synchronization procedure after installation. This is a normal part of the repair process.
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool must be used to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be needed to ensure correct brake light operation and to satisfy the traction control system.
Disclaimer: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
Verified Vehicle Fitment
This 2010 Yukon XL 1500 Body Control Module is a direct replacement for part number 15921352 and is interchangeable with the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084. It fits a wide variety of GM vehicles, including but not limited to those listed below.
This part will fit many makes and models including: ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS (1500/2500/3500) 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS (1500/2500/3500) 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, and the YUKON XL 1500 10. Please verify your specific part number or ID for a perfect match.
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your vehicle that controls and monitors a wide range of electronic body functions not related to the engine. This includes power windows, door locks, the security system, interior and exterior lighting, wipers, and the climate control system.
Is this module difficult to install?
The physical installation is typically straightforward, involving disconnecting the battery and swapping the module, which is usually located under the dashboard. However, as noted, some post-installation electronic procedures may be required with a professional scan tool to sync systems like the airbags. Many experienced DIY mechanics can perform the physical swap.
Do I need to send you my old part?
No. This product has no core charge, which means you can keep your original module without any extra fees or the hassle of shipping it back.
How do I provide my VIN number?
After you complete your purchase, we will contact you for your vehicle’s 17-digit VIN. We must have this information to program the 2010 Yukon XL 1500 Body Control Module correctly before we can ship it to you.
What happens if my airbag light comes on after installation?
This is a known possibility. The new BCM needs to be electronically introduced to the vehicle’s airbag computer (SDM). A qualified technician with a high-level diagnostic tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this and turn off the light.
Will this fix my specific electrical problem?
This module is the solution for failures within the BCM itself. While it resolves the most common electrical issues listed in the description, we always recommend a proper diagnosis by a qualified technician to confirm the BCM is the source of your problem before ordering.