Is Your 2010 Saturn Vue Stalling, Hesitating, or Refusing to Start?
If you’re experiencing frustrating fuel delivery problems with your 2010 Vue, the culprit is often not the fuel pump itself, but its electronic controller. The Fuel System Control Module (FSCM) is the brain that tells the fuel pump how much pressure to deliver. When it fails, it can cause a range of symptoms that can leave you stranded, from intermittent stalling and rough idling to a complete no-start condition, often accompanied by the check engine light and trouble code P069E.
Don’t waste money replacing a perfectly good fuel pump. This is a direct-fit, plug-and-play solution to get your vehicle back on the road quickly and reliably.
From the Shop Floor: A Real-World Diagnosis
“Just last month, a 2010 Vue was towed to my shop. The owner had already replaced the fuel pump himself, but the car still wouldn’t run. The check engine light was on with a P069E code. After a quick check of the wiring, my 20+ years of experience pointed directly to the Fuel System Control Module. These modules are notorious for failing due to heat and vibration, especially where they are mounted on the Vue. We installed one of our pre-programmed modules, and the vehicle fired right up, running smoother than ever. He could have saved himself the cost and hassle of the fuel pump replacement by starting with the FSCM.”
The Simple Solution: Programmed and Ready to Install
The biggest hurdle in replacing an FSCM has always been the expensive and inconvenient trip to the dealership for programming. We eliminate that step entirely. When you order from us, you provide your vehicle’s VIN, and we flash the module with the latest, most stable GM software specifically for your 2010 Vue. It arrives at your door ready for a simple, plug-and-play installation.
- โ VIN Programmed for Your Vehicle: We handle the complex programming so you don’t have to.
- โ No Dealer Visit Required: Save hundreds of dollars in programming fees and avoid towing costs.
- โ Restores Proper Engine Performance: Eliminates stalling, hesitation, and no-start conditions caused by a faulty FSCM.
- โ Direct-Fit Replacement: Guaranteed to fit and function just like the original part.
- โ Resolves Common DTCs: A primary fix for diagnostic trouble code P069E (Fuel Pump Control Module Commanded OFF).
Plug-and-Play Installation: Get Back on the Road Fast
You don’t need to be a master mechanic to complete this repair. The process is straightforward and requires only basic hand tools.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the Module: On your 2010 Saturn Vue, you’ll find the FSCM located in the right-hand (passenger side) rear of the engine compartment. It’s a small black box with electrical connectors.
- Disconnect and Remove: Carefully unplug the electrical harnesses. Then, unbolt the old, faulty module from its mounting bracket.
- Install the New Module: Bolt your new, pre-programmed FSCM into place and securely reconnect the electrical connectors you just removed.
- Final Step: Reconnect the negative battery terminal. Your vehicle is now ready to start with its fuel system fully restored.
Guaranteed Compatibility
This module is a direct replacement for a wide range of GM vehicles and is compatible with the following original equipment part numbers:
20877116, 20791901, 20827745, 20850927
Please verify your part number or provide your VIN at checkout to ensure a perfect, hassle-free installation for your 2010 VUE FSCM. Order today and solve your fuel system issues the easy way!