End Your Vehicle’s Electrical Chaos
Are flickering lights, malfunctioning power windows, or random warning alerts making every drive in your Suburban a frustrating experience? A faulty Body Control Module (BCM) is often the culprit behind these maddening electrical gremlins. It acts as the central command for your vehicle’s body electronics, and when it fails, it can cause a wide range of unpredictable issues. This direct-fit BCM is the definitive solution, arriving pre-programmed to your vehicle’s specific VIN to restore order and get you back on the road with confidence.
Common Symptoms of a Failing BCM & Your Direct-Fit Solution
If you’re experiencing any of the following, a failing BCM is the likely cause. This pre-programmed module is designed to resolve these issues by restoring proper communication between your vehicle’s electronic systems.
- Erratic or non-functional interior/exterior lights
- Power windows, locks, or mirrors working intermittently or not at all
- Dashboard warning lights (like ABS or Airbag) staying on
- Problems with the vehicle’s security system or remote keyless entry
- Unexplained battery drain that leaves you with a dead battery
- Instrument cluster gauges behaving strangely or not working
This isn’t just a replacement part; it’s a complete, ready-to-install fix for your 2010 Suburban 1500 Body Control Module. We handle the complex programming so you can handle the straightforward installation.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: This module arrives flashed with the latest GM software updates tailored to your specific VIN. This crucial step ensures seamless communication with your vehicle’s other systems, eliminating the need for an expensive trip to the dealership for programming.
- ✔ Plug & Play Installation: Because the programming is done before we ship, installation is as simple as locating your old module, disconnecting it, and plugging this one in.
- ✔ No Core Charge: You are not required to send your old, faulty BCM back to us. This saves you time, hassle, and the cost of a core deposit.
- ✔ Broad GM Compatibility: While perfect for the Suburban, this module also serves as a direct replacement for a wide range of GM cars, trucks, and SUVs. See the comprehensive list of compatible part numbers and models below.
- ✔ One-Year Warranty: This unit is backed by our one-year replacement warranty.
Expert Insight: The Critical Role of VIN Programming
From over 20 years of hands-on diagnostics, we’ve seen countless issues arise from using a generic, non-programmed module. A BCM isn’t just a box of relays; it’s the central nervous system for your Suburban’s comfort and convenience features. It manages everything from the dome lights to the power locks. VIN-specific programming ensures that the BCM knows exactly which options your vehicle has, allowing all systems to communicate flawlessly and function as the factory intended. Skipping this step is a recipe for more problems, not a solution.
Important Post-Installation Information
While this BCM is designed for a simple installation, some vehicles may require additional steps after the new module is connected. Please be aware of the following possibilities:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional-grade scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper brake light operation and traction control system performance.
Always consult a factory service manual or a qualified technician if you are unsure about any post-installation procedures.
Guaranteed Compatibility
This 2010 Suburban 1500 Body Control Module is a direct replacement for the following GM part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084. It fits a wide variety of GM vehicles including the Acadia, Escalade, Express/Savana vans, Impala, Tahoe, Yukon, and more.
Frequently Asked Questions
Do I really need to provide my VIN?
Yes, absolutely. Providing your Vehicle Identification Number (VIN) is essential. We use it to load the correct, vehicle-specific software and calibrations onto your new BCM. This step is what makes the module a true plug-and-play solution and ensures all your vehicle’s features work correctly.
Is this part difficult to install?
For most DIYers with basic tools, the physical installation is straightforward. The BCM is typically located under the dashboard on the driver’s side. The main challenge is accessing it. Since we handle the programming, you do not need any special computers or software for the installation itself, though some post-install procedures may require a scan tool as noted above.
What happens if my airbag light comes on after installation?
This is a known possibility. It means the new BCM needs to be electronically ‘introduced’ to your vehicle’s airbag system (SDM). A qualified technician with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this and turn off the light.
How do I know for sure that my BCM is the problem?
Diagnosing a BCM can be tricky as its symptoms can mimic other issues. The best way is a professional diagnosis. However, if you’re experiencing multiple, unrelated electrical issues simultaneously (e.g., power locks, interior lights, and radio all acting up), the BCM is a very strong suspect as it controls all of these functions.
Will this fix a parasitic battery drain?
A faulty BCM is a common cause of parasitic battery drain. The module can fail to ‘go to sleep’ when the vehicle is off, continuing to draw power and draining the battery. Replacing a faulty BCM with this programmed unit can certainly solve that problem.
Is there a core charge for my old part?
No. We do not require you to return your original module, so there is no core charge or extra deposit to worry about. You can keep or dispose of your old part.