Is Your Vehicle Stalling, Hesitating, or Refusing to Start?
A faulty Fuel Pump Control Module (FPCM) can bring your daily drive to a grinding halt, causing immense frustration and uncertainty. If your 2010 GMC Terrain, Chevy Equinox, or Camaro is experiencing symptoms like engine sputtering, a sudden loss of power, or a no-start condition, the FPCM is a highly probable cause. This module is the brain behind your fuel pump, and when it fails, it starves your engine of the fuel it needs to run properly. We offer the definitive solution to get you back on the road with confidence and restored performance.
Common Symptoms & Your Direct-Fit Solution
Don’t let a small electronic box disrupt your life. A failing FPCM often triggers specific Diagnostic Trouble Codes (DTCs) and noticeable performance issues. Watch for:
- Check Engine Light: Codes like P069E, P0230, or P025A often point directly to a fault in the fuel pump control circuit.
- Stalling or Sputtering: The engine may stall unexpectedly, especially under load, or sputter during acceleration due to inconsistent fuel pressure.
- No-Start Condition: You might hear the engine crank, but it won’t turn over because the fuel pump isn’t being activated to deliver fuel.
- Reduced Power: A noticeable lack of acceleration and overall sluggish performance can indicate the module is failing to command the correct fuel pressure.
This isn’t just a replacement part; it’s a complete, ready-to-install solution. Our 2010 GMC Terrain Fuel Pump Control Module is professionally programmed to your vehicleโs specific VIN before it ships, eliminating the most difficult and expensive step of the repair process.
Features & Real-World Benefits
- โ VIN-Programmed Before Shipping: Your module arrives ready to install right out of the box. This means no extra trips to the dealership and no expensive programming fees.
- โ Loaded with the Latest GM Software: We flash the unit with the newest updates from General Motors, ensuring optimal performance, fuel efficiency, and communication with your vehicle’s computer.
- โ Direct-Fit for Easy Installation: Engineered to be a perfect match for the original, this module fits 2010 Terrain, Equinox, and Camaro models, guaranteeing a straightforward installation in the factory location (LH rear compartment).
- โ Restores Engine Performance: By precisely regulating voltage to the fuel pump, this module restores correct fuel pressure, bringing back the smooth idle, sharp throttle response, and full power you expect from your vehicle.
- โ This unit is backed by our one-year replacement warranty.: Drive with peace of mind knowing your purchase is protected against defects.
An Expert’s Note on Programming: On these specific GM platforms, the FPCM is a ‘smart’ module that communicates constantly with the Engine Control Module (ECM) and Body Control Module (BCM). Simply installing a blank, unprogrammed module will not workโthe vehicle won’t recognize it, and it will not start. Our VIN-programming service bridges that critical communication gap, making this a true DIY-friendly repair that saves you hundreds of dollars compared to a dealership visit.
By choosing our pre-programmed 2010 GMC Terrain Fuel Pump Control Module, you are not just buying a part; you are buying a seamless, cost-effective repair experience that puts you back in control. This module is a direct replacement for part numbers 20831727, 20831728, and 20875846.
Frequently Asked Questions
How do I provide my VIN for programming?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship the part until we receive your VIN, as the programming is essential for the module to function in your vehicle.
Is this part difficult to install?
For someone with basic mechanical skills, the installation is very manageable. On the Terrain and Equinox, the module is typically located in the left rear compartment area of the cargo hold. The process involves disconnecting the battery, removing some trim panels, and unbolting the old module to swap in the new one. Since it’s pre-programmed, there are no complex electronic steps required after installation.
Will this fix a P069E check engine light code?
The DTC P069E (Fuel Pump Control Module Commanded OFF) is one of the most common codes indicating a failed FPCM. While you should always perform a complete diagnosis, this pre-programmed module is the correct and most frequent solution for this specific code.
What is the difference between an FPCM and a fuel pump?
The fuel pump is the mechanical pump (usually inside the fuel tank) that moves gasoline. The Fuel Pump Control Module (FPCM) is the electronic brain that tells the fuel pump how fast to run. The FPCM receives commands from the engine computer and varies the voltage to the pump to precisely control fuel pressure.
Is this the correct part for my 2010 Chevy Camaro?
Yes, this module is a confirmed fit for the 2010 Chevrolet Camaro, as well as the 2010 GMC Terrain and 2010 Chevrolet Equinox. It serves the same function across these platforms.