Is your 2010 GMC Terrain or Equinox leaving you stranded with sudden stalling, hesitation, or a frustrating no-start condition? A faulty Fuel Pump Control Module (FPCM) is the most common cause of these issues, disrupting your daily routine and compromising your vehicle’s reliability. This is the definitive, hassle-free solution to get your vehicle back on the road with confidence. We pre-program this module to your vehicle’s specific VIN with the latest GM software updates, ensuring it works perfectly right out of the boxโno expensive trip to the dealership required.
Common Symptoms & Your Direct-Fit Solution
If you’re experiencing any of the following, a failing FPCM is the likely culprit. This module is the permanent fix for issues like:
- Engine cranking but refusing to start
- Stalling while driving, especially during acceleration
- Engine hesitation or sputtering
- Reduced engine power and poor fuel economy
- An active Check Engine Light with codes like P069E, P0230, P025A, or U0109
This isn’t just a replacement part; it’s a complete, ready-to-install solution. By providing your VIN at checkout, you receive a perfectly matched 2010 GMC Terrain fuel pump control module that restores proper communication between your vehicle’s computer and the fuel pump, correcting the root cause of the problem.
- โ Ready for Installation: Arrives pre-programmed to your vehicle’s VIN. This completely eliminates the need for dealer programming, saving you significant time and money.
- โ Latest GM Software: We flash each module with the newest, most stable software from General Motors. This corrects known factory bugs and ensures optimal fuel delivery and long-term reliability.
- โ Restores Peak Performance: Directly resolves common failure symptoms, including stalling, no-start conditions, and fuel system trouble codes, getting your SUV running smoothly again.
- โ Guaranteed Fitment: A direct, OEM-spec replacement for part numbers 20831727, 20831728, and 20875846, ensuring a perfect fit for your 2010 Terrain, Equinox, or Camaro.
- โ Purchase with Confidence: This unit is backed by our one-year replacement warranty.
From the Technician’s Bench: A common mistake is replacing the in-tank fuel pump when these symptoms appear, only to have the problem continue. The FPCM acts as the brain, telling the pump precisely how much voltage to use. The original modules on these GM vehicles are known to fail from heat and electrical stress. Installing our expertly programmed 2010 GMC Terrain fuel pump control module not only replaces the failed hardware but also installs corrected software logic, providing a much more robust and lasting repair than simply swapping for another un-programmed or used part.
Don’t let an unreliable vehicle dictate your schedule. This pre-programmed 2010 GMC Terrain fuel pump control module is the most effective and efficient way to restore the dependability you and your family rely on. Order today and solve your fuel system problems for good.
Frequently Asked Questions
Why is providing my VIN so important?
Your vehicle’s 17-digit Vehicle Identification Number (VIN) is like its fingerprint. We use it to load the exact software and calibrations your specific vehicle requires to function correctly. Without this programming, the module will not communicate with your car’s computer, and the engine will not start.
Is this part truly plug-and-play?
Yes. Because we handle all the programming before shipment, the module is ready for installation upon arrival. You or your mechanic can install it, and it will work immediately without requiring any additional programming from a dealership.
Where is this module located on my 2010 Terrain or Equinox?
The Fuel Pump Control Module is typically located in the rear of the vehicle, inside the LH (driver’s side) rear compartment or cargo area. You may need to remove an interior trim panel to access it.
Will this fix a Check Engine Light with code P069E?
Yes, the diagnostic trouble code P069E (Fuel Pump Control Module Requested MIL Illumination) is one of the most common indicators of a failed FPCM. This part is the direct solution for that code.
What makes this better than a used module from a salvage yard?
A used module is programmed to a different vehicle and will not work in yours. Furthermore, it likely has the same original design flaws and is nearing the end of its service life. Our module is verified and programmed with the latest GM software to ensure reliability.
How do I provide my VIN after ordering?
After you complete your purchase, simply reply to your order confirmation email with your 17-digit VIN, or send it to us through the website’s messaging system. We cannot ship your part until we receive this information.