Is Your Vehicle Stalling, Hesitating, or Refusing to Start?
A faulty Fuel Pump Control Module (FPCM) can bring your daily drive to a grinding halt, leaving you stranded and frustrated. If you’re experiencing erratic engine behavior, a check engine light, or a no-start condition in your 2010 Equinox, Terrain, or Camaro, you’ve found the definitive solution. This isn’t just a replacement part; it’s a fully programmed, ready-to-install module that restores your vehicle’s performance and your peace of mind. We take the guesswork and the expensive trip to the dealership out of the equation by programming this module specifically to your vehicle’s VIN before it ever leaves our facility.
Common Symptoms & Your Direct-Fit Solution
A failing FPCM can often be misdiagnosed as a bad fuel pump, leading to costly and unnecessary repairs. Recognizing the signs is the first step to getting your vehicle back on the road. If you’re seeing any of the following, this module is the likely culprit:
- Check Engine Light (CEL) Illumination: Often accompanied by Diagnostic Trouble Codes (DTCs) such as P069E, P0230, P025A, or U0109.
- No-Start or Hard-Start Condition: The engine cranks but refuses to fire up, or takes an extended time to start.
- Engine Stalling: The engine may stall unexpectedly while driving or idling, creating a dangerous situation.
- Reduced Power & Poor Acceleration: Your vehicle may feel sluggish and unresponsive due to incorrect fuel pressure.
Our pre-flashed 2010 Equinox Fuel Pump Control Module is the direct-fit answer to these problems, arriving at your door ready for a simple, plug-and-play installation.
Features & Benefits
- โ VIN-Programmed for Your Vehicle: We flash the module with the latest GM software using your specific VIN. This ensures perfect communication with your vehicle’s computer systems right out of the box.
- โ Eliminate Dealer Programming: Skip the expensive and time-consuming trip to the dealership. Our service saves you hundreds in programming fees and vehicle downtime.
- โ Restore Peak Performance: A correctly functioning module ensures precise fuel pressure regulation, restoring lost power, improving fuel efficiency, and providing smooth engine operation.
- โ Direct-Fit OEM Compatibility: Engineered to match original specifications for a flawless installation. Compatible with part numbers 20831727, 20831728, and 20875846.
- โ This unit is backed by our one-year replacement warranty.
Expert Insight: Why Pre-Programming is Non-Negotiable
From our two decades of experience, we’ve seen countless drivers replace a fuel pump only to find the real issue was the control module. The FPCM acts as the brain for your fuel system, constantly adjusting voltage to the fuel pump to maintain optimal pressure. On modern GM vehicles, this module is not a simple swap. It’s coded to the vehicle’s unique identity (the VIN). Installing a non-programmed module is like putting a lock on your door with the wrong keyโit simply won’t work. Our process ensures the module is a perfect digital match, guaranteeing a first-time fix and saving you from a world of diagnostic headaches.
Frequently Asked Questions
Do I need to do any programming or flashing myself?
Absolutely not. The main benefit of our service is that we program the 2010 Equinox Fuel Pump Control Module to your vehicle’s VIN before we ship it. It arrives ready for a plug-and-play installation.
Where is this module located on my vehicle?
For the 2010 Chevrolet Equinox and GMC Terrain, the Fuel Pump Control Module is typically located in the left-hand rear compartment area of the vehicle. Please consult a service manual for your specific model for the exact location and removal procedure.
What information do you need from me?
After you complete your purchase, you must provide us with your 17-digit Vehicle Identification Number (VIN). You can usually find this on your vehicle’s dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Is this the same part as a Fuel System Control Module (FSCM)?
Yes. The terms Fuel Pump Control Module (FPCM) and Fuel System Control Module (FSCM) are often used interchangeably for this component. It performs the same function.
Will this fix a P069E trouble code?
While we cannot diagnose your vehicle remotely, the DTC P069E (Fuel Pump Control Module Requested MIL Illumination) is one of the most common codes indicating a failure of this specific module. Replacing it with our programmed unit is a very common and effective solution for this code.
My original part number is 20875846. Will this work?
Yes, this module is a direct replacement for several part numbers, including 20831727, 20831728, and 20875846. As long as your vehicle is a compatible 2010 model, this part will function correctly once programmed to your VIN.