Get Your Truck Back on the Road, Fast.
Is your truck or SUV suddenly stalling, hesitating, or refusing to start? A failing Fuel System Control Module (FSCM) is one of the most common culprits on these GM vehicles. Don’t waste time and money on a trip to the dealership for expensive programming. This module is the definitive solution, arriving at your door pre-programmed with the latest GM software, specifically matched to your vehicle’s VIN. It’s the straightforward, reliable fix you need to restore your vehicle’s performance and your peace of mind.
Common Symptoms & Your Solution
If you’re experiencing any of the following issues, a faulty FSCM is the likely cause. This module is designed to be the direct solution for these frustrating problems:
- Engine cranks but won’t start
- Sudden stalling while driving, especially under load
- Hesitation or stumbling during acceleration
- Rough or erratic idle
- Check Engine Light with codes like P069E, P0230, or P0606
By replacing your old unit with our precisely programmed 2010-2012 Sierra 1500 fuel pump control module, you’re not just swapping a partโyou’re installing a reliable, long-term fix that restores factory fuel pressure command and engine performance.
Features & Benefits
- โ Plug & Play Installation: Arrives pre-flashed to your specific VIN. No dealer visit or special programming tools required, saving you hundreds of dollars.
- โ Updated GM Software: Programmed with the newest calibrations from General Motors to ensure optimal fuel delivery, efficiency, and system stability.
- โ Restores Engine Performance: Eliminates dangerous stalling, hard starts, and poor acceleration by restoring precise control over the fuel pump.
- โ Direct-Fit Replacement: Engineered to be a perfect match for the original module, ensuring a seamless installation process. Compatible with part numbers 20791901, 20827745, 20877116, and 20850927.
- โ This unit is backed by our one-year replacement warranty.
Expert Insight: The Real Cause of Failure
As a technician, I’ve replaced hundreds of these modules. The FSCM on most GM trucks and SUVs is mounted on the frame rail, where it’s constantly exposed to water, road salt, and vibrations. This exposure leads to internal corrosion and eventual failure of the circuit board. When you install our pre-programmed replacement, you’re installing a fresh unit with the latest software logic designed to handle these conditions more effectively than the original. This isn’t just a replacement; it’s a definitive repair for a known weak point.
Getting your truck or SUV running right shouldn’t be a complicated process. Simply provide your VIN during checkout, and we’ll handle the complex programming. You’ll receive a ready-to-install 2010-2012 Sierra 1500 fuel pump control module that gets the job done right the first time. Take control of your repair and get back on the road with confidence.
Frequently Asked Questions
Why do I need to provide my vehicle’s VIN?
Your vehicle’s VIN (Vehicle Identification Number) is required so we can program the module with the exact software and calibrations specified by GM for your truck’s specific engine, transmission, and emissions equipment. This ensures perfect compatibility and performance without any additional programming.
Is this part difficult to install?
For most of the compatible trucks and SUVs, the module is located on the driver’s side frame rail, often near the spare tire. Installation typically involves removing a few bolts and disconnecting a single electrical connector. It is generally considered a straightforward job for a DIY mechanic with basic tools.
Will this fix a Check Engine Light with code P069E?
Yes, P069E (Fuel Pump Control Module Commanded On) is one of the most common diagnostic trouble codes indicating a failure of the FSCM. Replacing the module with this pre-programmed unit is the correct and most common repair for this code, provided the wiring and fuel pump are in good condition.
How do I know if this is the correct part for my vehicle?
This module is a direct replacement for part numbers 20791901, 20827745, 20877116, and 20850927. Please check the extensive fitment list on this page. As long as your vehicle is listed and you provide the correct VIN, we guarantee it will be programmed correctly for your application.
What happens if I don’t program the module?
An unprogrammed Fuel System Control Module will not communicate correctly with your vehicle’s other computers. This will result in a no-start condition and will not fix your problem. Our pre-programming service for the 2010-2012 Sierra 1500 fuel pump control module eliminates this entire issue.