Is Your GM Truck or SUV Stalling or Refusing to Start?
You turn the key, the engine cranks, but it just won’t catch. Or maybe it starts, runs rough for a few seconds, and then dies. If you’re seeing a check engine light with codes like P069E, P0230, or U0109, you’re likely dealing with a failed Fuel System Control Module (FSCM), also known as a Fuel Pump Driver Module. This isn’t just an inconvenience; it’s a problem that leaves you stranded.
A Real-World Scenario: Just last month, a 2011 Silverado 1500 was towed into my bay. The owner had already replaced the in-tank fuel pump himself, but the truck still wouldn’t run for more than a few seconds. His scanner showed a P069E code โ โFuel Pump Control Module Commanded OFF.โ The problem wasn’t the new pump; it was the original FSCM mounted on the frame rail. After years of exposure to road salt and moisture, the internal circuit board had corroded, causing erratic voltage to the pump. This is one of the most common failures I see on these GM platforms.
The Direct-Fit, No-Hassle Solution
Forget expensive dealership visits and the need for specialized programming tools. This Fuel System Control Module is the definitive solution. We take all the guesswork and complexity out of the repair. Simply provide us with your vehicle’s VIN during checkout, and our technicians will program the module with the latest GM-certified software specific to your exact vehicle. It arrives at your door ready for a simple, plug-and-play installation.
Key Benefits of This VIN-Programmed 2010-2012 FSCM Module:
- โ Eliminate Stalling and No-Start: Restores correct voltage and communication to your fuel pump, ensuring reliable engine performance.
- โ No Additional Programming Needed: We flash the module to your VIN before shipping. It’s ready to install right out of the box.
- โ Clear Pesky Check Engine Lights: A direct fix for common FSCM-related diagnostic trouble codes (DTCs) like P069E.
- โ Save Hundreds Over Dealer Costs: Get a fully functional, vehicle-specific part without paying for dealership labor and programming fees.
- โ Broad Compatibility: This module is a direct replacement for part numbers 20791901, 20827745, 20877116, and 20850927, covering a massive range of GM vehicles.
Plug-and-Play Installation: Get Back on the Road Fast
You don’t need to be a master mechanic to replace this module. With basic hand tools, you can have your vehicle running properly in under an hour. The location varies by model, but it’s typically found on the driver-side frame rail (on trucks/SUVs) or in the trunk/rear compartment area (on cars).
- Safety First: Disconnect the negative terminal from your vehicle’s battery.
- Locate the Old Module: Find the existing FSCM. It’s a small, black box with electrical connectors, usually held on by two bolts.
- Disconnect and Remove: Carefully unplug the electrical harnesses and unbolt the old module from the chassis.
- Install the New Module: Bolt your new, pre-programmed module into place and securely reconnect the electrical harnesses.
- Reconnect and Start: Reconnect the battery terminal, turn the key, and enjoy a smooth-running engine.
Stop chasing the wrong parts. If your 2010-2012 GM vehicle is experiencing fuel delivery problems, this VIN-programmed FSCM is the reliable, cost-effective repair you need. Order today and restore your vehicle’s dependability.