Restore Your Escalade’s Power and Reliability
Is your 2010-2012 Cadillac Escalade suffering from frustrating starting issues, unexpected stalling, or a noticeable lack of power? These are classic signs of a failing Fuel System Control Module (FSCM). This critical component regulates the voltage sent to your fuel pump, and when it falters, it can leave your premium SUV feeling anything but. Don’t settle for a vehicle that’s unreliable. This is the definitive, hassle-free solution to restore the commanding performance and dependability you expect from your Cadillac.
Common Symptoms & Your Solution
A failing FSCM can trigger a range of problems that disrupt your driving experience. If you’re experiencing any of the following, this pre-programmed module is your answer:
- Engine cranks but refuses to start
- Vehicle starts and then immediately stalls
- Hesitation or stumbling during acceleration
- Reduced engine power and poor performance
- An illuminated Check Engine Light with codes like P069E, P0230, or U0109
This isn’t just a replacement part; it’s a complete solution. We take a genuine quality module and program it with the latest GM software, specifically matched to your vehicle’s VIN. This means it arrives at your door ready for a direct, plug-and-play installation, saving you a costly trip to the dealership for programming. You are getting the precise fix for your 2010-2012 Escalade Fuel Control Module issues.
Features & Benefits
- โ VIN-Programmed for Your Escalade: We flash the module to your specific VIN before shipping. This eliminates the need for expensive dealer-only programming, saving you significant time and money.
- โ Loaded with Latest GM Updates: Your module comes with the most current software from General Motors, ensuring optimal fuel delivery, efficiency, and performance based on factory improvements.
- โ True Plug-and-Play Installation: Because it’s pre-programmed, you or your mechanic can install it directly, restoring function without extra steps.
- โ Restores Engine Performance: Get back the smooth idle, crisp throttle response, and reliable starting your vehicle is known for.
- โ Broad GM Compatibility: This module is a direct replacement for part numbers 20791901, 20827745, 20877116, and 20850927, ensuring you get the right part the first time.
- โ This unit is backed by our one-year replacement warranty.: Drive with confidence knowing your purchase is protected.
Expert Insight: Why Do These Modules Fail?
As a technician with over two decades of experience, I’ve replaced hundreds of these modules. On most GM trucks and SUVs like your Escalade, the FSCM is mounted on the driver’s side frame rail. This location exposes it to everything the road throws at it: water, salt, mud, and vibrations. Over time, moisture can seep past the seals and corrode the internal circuit board, leading to the erratic behavior you’re experiencing. Our solution provides a fresh, correctly programmed 2010-2012 Escalade Fuel Control Module to reliably command your fuel system for years to come.
Frequently Asked Questions
Why does this module need to be programmed?
The Fuel System Control Module is a smart device that communicates with your vehicle’s main computer (ECU). Programming it to your specific Vehicle Identification Number (VIN) ensures it has the correct software and parameters to operate your fuel system precisely as the factory intended.
Where is the FSCM located on my 2010-2012 Escalade?
You will typically find the FSCM mounted on the outside of the driver’s side frame rail, often near the spare tire. It’s a small black box with an electrical connector and is held in place by a few bolts.
What happens if I install a module that isn’t programmed?
An unprogrammed module will not work. The vehicle will not recognize it, and you will have a no-start condition. The vehicle’s anti-theft system may also be triggered. Our pre-programming service solves this entire problem.
How do I provide my VIN?
After you complete your purchase, simply send us a message with your 17-digit VIN. We cannot ship your part until we receive this information, as the programming is the most critical step of your order.
What are the most common signs of a failing 2010-2012 Escalade Fuel Control Module?
The most common symptoms include the engine cranking but not starting, stalling after starting, hesitation under load, and the Check Engine Light being on with code P069E. These indicate the fuel pump is not receiving the correct voltage commands from the module.