Is Your Escalade Running Rough, Stalling, or Refusing to Start?
If your 2010-2012 Cadillac Escalade ESV is experiencing frustrating issues like engine hesitation, sudden stalling, or a crank-no-start condition, a faulty Fuel System Control Module (FSCM) is the most likely cause. This critical component regulates fuel pressure and delivery, and when it fails, it compromises the performance and reliability of your luxury SUV. This is the definitive, hassle-free solution to restore the smooth, powerful, and dependable ride you expect from your Cadillac.
Common Symptoms & Your Solution
A failing FSCM can trigger a range of problems and diagnostic trouble codes (DTCs). Don’t let these issues leave you stranded. This module is the direct solution for symptoms such as:
- Check Engine Light with codes like P069E, P0230, or P0606
- Engine stalling, especially under load or at idle
- Hesitation or stumbling during acceleration
- Extended cranking time before the engine starts
- Complete no-start condition
- Reduced fuel economy and poor engine performance
Our programmed 2010-2012 Escalade ESV fuel control module arrives ready to install, eliminating the need for an expensive trip to the dealership for programming. We flash the unit with the latest official GM software using your vehicle’s VIN, ensuring perfect communication and function right out of the box.
Features & Benefits
- โ Plug & Play Installation: This module is pre-programmed to your specific VIN. Simply provide your VIN after purchase, and we handle the rest. No extra tools or dealer visits required.
- โ Restores Peak Engine Performance: By precisely managing fuel pressure, this module resolves rough idle, hesitation, and stalling, bringing back the smooth and responsive power your Escalade is known for.
- โ Guaranteed Compatibility: A direct replacement for part numbers 20850927, 20791901, 20827745, and 20877116, ensuring a perfect fit and function.
- โ Solves Annoying Check Engine Lights: Directly addresses and clears common fuel system-related fault codes, getting your dashboard clear and your vehicle back to spec.
- โ This unit is backed by our one-year replacement warranty.
Expert Insight: Why Pre-Programming is Non-Negotiable
As a veteran technician, I’ve seen countless vehicle owners replace an FSCM only to have the same problem persist because the new module wasn’t programmed. On modern GM vehicles like your Escalade, the FSCM is a ‘smart’ module that must be electronically matched to your vehicle’s VIN. Without this step, it simply won’t work correctly. These modules are often mounted on the frame rail, exposed to moisture and corrosion, which is a primary cause of failure. Our process not only provides a quality replacement but also ensures it has the most up-to-date GM software, which often includes improvements over the original programming to prevent future issues. Choosing a programmed 2010-2012 Escalade ESV fuel control module is the only way to guarantee a successful, one-time repair.
Frequently Asked Questions
Do I need to get this module programmed by a dealer?
No. The main benefit of our service is that we program the module for you before it ships. Simply provide us with your vehicle’s VIN number during checkout or via message, and it will arrive ready for a plug-and-play installation.
Where is the FSCM located on my 2011 Escalade ESV?
On most GM trucks and SUVs from this era, including the Escalade ESV, the Fuel System Control Module is typically mounted on the driver’s side frame rail, often above the spare tire. It’s exposed to the elements, which is why corrosion is a common cause of failure.
What’s the difference between the fuel pump and the fuel control module?
The fuel pump is the mechanical device in the fuel tank that moves gasoline. The Fuel System Control Module (FSCM) is the computer that tells the fuel pump how fast to run to maintain correct pressure. A bad FSCM can make a perfectly good fuel pump seem faulty.
How do I provide my VIN number for programming?
After you complete your purchase, you can send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is essential for the part to function.
Will this part fix a P069E check engine light code?
Yes, the DTC P069E (Fuel Pump Control Module Requested MIL Illumination) is one of the most common codes indicating a failure of the FSCM. Replacing the module with this pre-programmed unit is the correct procedure to resolve this code.