Get Your GM Truck or SUV Started and Running Reliably
There’s nothing more frustrating than a vehicle that cranks but won’t start, or worse, stalls unexpectedly in traffic. If your Hummer, Sierra, Tahoe, or other GM vehicle is suffering from erratic fuel delivery, hesitation, or a no-start condition, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. This isn’t just a replacement part; it’s a complete, pre-programmed solution designed to get you back on the road with confidence. We flash this module with the latest GM software updates, specifically matched to your vehicle’s VIN, ensuring it works perfectly right out of the box. Stop the guesswork and install the definitive fix for your fuel system woes with this 2009 Hummer H3 Fuel Pump Control Module.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can mimic a bad fuel pump, leading to misdiagnosis and wasted money. Before you consider replacing the pump, check for these classic signs of a failing control module:
- Engine cranks but will not start
- Vehicle stalls intermittently, especially when warm
- Hesitation or stumbling under acceleration
- Noticeable loss of engine power
- Check Engine Light with codes like P069E, P0230, or U0109 (Loss of Communication with FPCM)
This module is the direct solution to these issues, restoring precise fuel pressure control and communication with your vehicle’s computer (ECU). By providing us with your VIN upon purchase, you guarantee that the module you receive is programmed for your specific vehicle, eliminating the need for an expensive trip to the dealership for programming.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: Arrives ready for a true plug-and-play installation. No extra tools or dealer visits required.
- ✔ Loaded with Latest GM Software: Ensures optimal performance, fuel efficiency, and communication within your vehicle’s network.
- ✔ Restores Dependable Starting: Eliminates the uncertainty and frustration of no-start and stalling conditions caused by a faulty FPCM.
- ✔ Broad GM Compatibility: A direct-fit replacement for a wide range of popular GM trucks and SUVs from 2007-2009 (see full fitment list).
- ✔ Fixes Common Diagnostic Codes: Directly addresses communication and performance codes related to the fuel pump control circuit, such as P069E and U0109.
- ✔ This unit is backed by our one-year replacement warranty.
Expert Insight from the Garage:
We’ve seen hundreds of these GM trucks and SUVs come through the shop with fuel delivery problems. The FPCM is often mounted on the frame rail, where it’s exposed to water, salt, and road debris. This leads to corrosion on the circuit board and connector pins, causing intermittent failures that are maddening to diagnose. Simply swapping in a used module won’t work because these parts are coded to the original vehicle’s VIN. Our process of programming a quality replacement 2009 Hummer H3 Fuel Pump Control Module to *your* specific VIN is the only way to ensure a lasting, reliable repair without paying dealership prices for programming.
Frequently Asked Questions
Why do I need to provide my vehicle’s VIN?
Your vehicle’s VIN (Vehicle Identification Number) is required so we can program the module with the exact software and calibrations for your specific engine, transmission, and options. This ensures seamless communication with other computers on the vehicle and guarantees a plug-and-play installation.
Is this part truly plug-and-play?
Yes. Because we handle all the programming before shipping, the module will be ready to install and function immediately. Simply disconnect the battery, swap the old module with this new one, reconnect the battery, and start your vehicle.
Where is the FPCM located on my vehicle?
On most compatible GM trucks and SUVs (like the Silverado, Sierra, Tahoe, and Suburban), the FPCM is typically mounted on the driver’s side frame rail, near the spare tire. On other models, it may be in the rear near the crossmember or in the engine compartment. Always consult a repair manual for your specific vehicle to confirm the location.
What happens if I install a module that isn’t programmed?
An unprogrammed or incorrectly programmed module will not be able to communicate with your vehicle’s main computer. This will result in a no-start condition and will likely set communication-related trouble codes (like U0109). Our service completely avoids this problem.
Does this part fit models other than the 2009 Hummer H3?
Absolutely. This 2009 Hummer H3 Fuel Pump Control Module is compatible with a wide array of GM vehicles, including the Cadillac Escalade, Chevy Silverado/Tahoe, GMC Sierra/Yukon, Buick Enclave, and more. Please refer to the detailed fitment list on this page to confirm compatibility with your specific year and model.