Your Hummer Won’t Start? Get Back on the Trail with Confidence.
There’s nothing more frustrating than turning the key on your Hummer H3 and getting nothing. That feeling of being stranded, whether in your driveway or far from civilization, is something no H3 owner should experience. If your truck is stalling, hesitating, or refusing to start, a failed Fuel Pump Control Module (FPCM) is a very likely culprit. This isn’t just a part; it’s the solution to restoring the rugged, dependable performance you expect from your vehicle. We provide a professionally programmed 2009 Hummer H3 Fuel Pump Control Module that gets you back on the road without the hassle and expense of a dealership visit.
Common Symptoms & Your Solution
A failing FPCM, also known as a Fuel System Control Module (FSCM), can cause a range of debilitating issues. Because this module is typically mounted on the frame rail, it’s exposed to harsh conditions that lead to corrosion and failure. You might be experiencing:
- Engine cranks but will not start
- Sudden stalling while driving
- Engine sputtering or hesitation under acceleration
- Reduced engine power and poor performance
- Check Engine Light with Diagnostic Trouble Codes (DTCs) like P069E, P0230, or P0606
This module is the definitive, reliable fix. We take a genuine GM module and flash it with the latest, most stable software updates specifically for your vehicle’s Vehicle Identification Number (VIN). This ensures perfect communication between the module and your H3’s computer systems, restoring fuel pressure regulation to factory specifications.
Features & Tangible Benefits
- ✔ VIN-Programmed for Your H3: This module arrives ready for installation. No expensive dealer programming, no special tools, no extra trips. It’s a true plug-and-play solution.
- ✔ Latest GM Software Updates: We flash the unit with the newest software from General Motors, which often resolves underlying drivability issues and improves fuel system performance.
- ✔ Restored Engine Performance: By precisely controlling the fuel pump, this module ensures your engine gets the exact amount of fuel it needs, restoring lost power and throttle response.
- ✔ Direct-Fit Replacement: Engineered to be a perfect replacement for a wide range of original part numbers, including 15213110, 20759945, 25866052, and more, guaranteeing a perfect fit.
- ✔ Built for Durability: This is the same component trusted by the manufacturer, designed to withstand the elements and restore the rugged reliability your Hummer is known for.
- ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty.
Expert Insight: The Dealership Alternative
Many drivers are surprised to learn that you can’t just buy a new FPCM off the shelf and install it. These modules must be programmed to the specific vehicle they are being installed in. For years, this meant a mandatory trip to the dealership, involving towing costs, high labor rates, and programming fees that can easily add hundreds of dollars to the repair. Our service eliminates that entire step. By sending us your VIN at checkout, you receive a part that is 100% ready to be installed by you or your trusted mechanic, saving you significant time, money, and frustration.
Frequently Asked Questions
Why does this module need to be programmed to my VIN?
Modern vehicles use a complex network of computers that need to recognize each other to function correctly. Programming the 2009 Hummer H3 Fuel Pump Control Module with your vehicle’s specific VIN ensures it communicates seamlessly with the Engine Control Module (ECM) and other systems, preventing compatibility issues and error codes.
Where is this part located on my 2009 Hummer H3?
On the Hummer H3, the Fuel Pump Control Module is typically mounted on the vehicle’s frame, specifically on a rear crossmember. Its location exposes it to road salt, water, and debris, which is a primary reason these modules fail over time due to corrosion.
Is this a difficult part to install?
For someone with basic mechanical skills, the installation is straightforward. It typically involves disconnecting the battery, safely raising the vehicle, locating the old module on the frame, unplugging the electrical connector, and unbolting it. The new, pre-programmed module then bolts right back in its place. Since the programming is already done, it’s a simple bolt-off, bolt-on job.
What happens if I provide the wrong VIN?
It is absolutely critical that you provide the correct 17-digit VIN. An incorrect VIN will result in the module being programmed with the wrong software, and it will not work in your vehicle. Please double-check the VIN from your driver’s side door jamb or dashboard before sending it to us.
Is this compatible with other GM trucks and SUVs?
Yes, this FPCM is compatible with a wide array of GM vehicles from the same era, including the Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Escalade, and more. Our programming process ensures it works specifically for the vehicle VIN you provide, whether it’s for the 2009 Hummer H3 Fuel Pump Control Module or another compatible model.