Get Your Tough H3 Running Right Again
There’s nothing more frustrating than turning the key in your Hummer H3 and getting nothing but a cranking engine, or worse, having it stall out when you’re far from home. Your H3 is built for dependability and adventure, and a failing Fuel Pump Control Module (FPCM) can bring all of that to a halt. This isn’t just a part; it’s the solution to restore the reliable fuel delivery your engine needs to perform, ensuring your truck is ready for any challenge. We solve the problem for you by pre-programming this 2009 Hummer H3 Fuel Pump Control Module to your vehicle’s specific VIN, making the repair process as simple and straightforward as possible.
Common Symptoms & Your Solution
A failing FPCM, also known as a Fuel System Control Module (FSCM), can be tricky to diagnose, often mimicking a bad fuel pump. If you’re experiencing issues like engine hesitation, stalling, a crank-no-start condition, or a check engine light with codes like P069E, P0230, or P025A, a faulty module is the most likely culprit. This module is the definitive fix, arriving ready for a plug-and-play installation without requiring an expensive trip to the dealership for programming. It’s the smart, efficient way to get your Hummer back to its peak performance.
- ✔ Plug & Play Installation: This module arrives pre-flashed to your vehicle’s VIN. No dealer programming is required, saving you time and money.
- ✔ Latest GM Software: We program each unit with the most current vehicle-specific software from GM, ensuring optimal performance and longevity.
- ✔ Restored Engine Performance: Cures common issues like stalling, hesitation, and no-start conditions by restoring precise fuel pressure control.
- ✔ Guaranteed Compatibility: A direct replacement for a wide range of original part numbers, including: 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, and 25967325.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
An Expert’s Note: The Hidden Culprit
“I’ve seen countless H3 and GM truck owners replace their entire fuel pump assembly, only to find the same frustrating stalling and starting issues persist. The problem, more often than not, is this small electronic module. It’s exposed to the elements under the vehicle and is a known failure point. The real game-changer with our solution is the VIN-specific programming. It eliminates the guesswork and the need for expensive scan tools or a tow to the dealer. You’re getting a part that is electronically identical to what the factory would install, ready to go right out of the box. It’s the fix that should have been done in the first place.”
By installing this precision-programmed 2009 Hummer H3 Fuel Pump Control Module, you are directly addressing a critical failure point and restoring the robust dependability your vehicle was designed for. Take control of your repair and get back on the road with confidence.
Frequently Asked Questions
Why is VIN programming so important for this part?
The Fuel Pump Control Module communicates with your vehicle’s main computer (ECU/PCM) to regulate fuel pressure. Each vehicle has unique software parameters. Programming this module to your specific VIN ensures it communicates correctly, operates efficiently, and prevents compatibility issues that could cause poor performance or even damage to the fuel system.
Where is this module located on my 2009 Hummer H3?
On the 2009 Hummer H3, the FPCM is typically mounted to the rear frame crossmember. It’s exposed to the elements, which is why corrosion and water intrusion are common causes of failure. Always disconnect the battery before beginning installation.
How do I provide my VIN?
After you complete your purchase, simply send us a message with your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information, as the programming is a critical step in our process.
Is this a difficult part to install myself?
For someone with basic mechanical skills, this is a very manageable job. It typically involves removing a few bolts and disconnecting an electrical connector. Since our 2009 Hummer H3 Fuel Pump Control Module is pre-programmed, the most difficult part of the job (the software flashing) is already done for you.
Will this fit other GM trucks and SUVs?
Yes, this FPCM is compatible with a wide range of GM vehicles from approximately 2007-2009, including the Silverado, Sierra, Tahoe, Yukon, Escalade, and more. Please check the detailed fitment list on this page to confirm compatibility with your specific vehicle.
What is the warranty on this part?
This unit is backed by our one-year replacement warranty. We stand behind the quality of our parts and programming to give you confidence in your repair.