Is Your Truck Stalling, Sputtering, or Refusing to Start?
There’s nothing more frustrating than a vehicle you can’t rely on. If your 2009 Chevy Colorado or other GM truck is experiencing sudden power loss, hesitation when you accelerate, or a dreaded no-start condition, a failing Fuel Pump Control Module (FPCM) is often the culprit. This small but critical component regulates the voltage sent to your fuel pump, and when it fails, it starves your engine of the fuel it needs to run properly. You might see a Check Engine Light with code P069E, which is a tell-tale sign of an FPCM issue.
The Dealership-Free Solution: A True Plug-and-Play Repair
Traditionally, replacing an FPCM meant buying the part and then paying a dealership to program it to your vehicle. We eliminate that costly and time-consuming step. This is a direct-fit 2009 Colorado Fuel Pump Module that we program specifically to your truck’s Vehicle Identification Number (VIN) before we ship it. It arrives at your door ready for a straightforward installation, loaded with the latest GM software updates for optimal performance and longevity.
A Real-World Scenario from My Shop
“Just last month, a 2009 Colorado was towed in. The owner said it would crank but not start, and sometimes it would die at stoplights. His scanner showed a P069E code. We checked fuel pressure at the rail and it was erraticโa classic symptom. Instead of just throwing a fuel pump at it, we went straight for the FPCM, which is a known failure point on these trucks due to its location on the frame, where it’s exposed to water and corrosion. We swapped in a VIN-programmed module like this one, and the truck fired right up with stable fuel pressure. It’s a 30-minute fix that solves a major headache.”
Symptoms This FPCM Corrects:
- โ Engine stalling, especially under load or when coming to a stop
- โ No-start condition where the engine cranks but won’t turn over
- โ Hesitation or sputtering during acceleration
- โ “Reduced Engine Power” message on the dashboard
- โ Active Check Engine Light with diagnostic trouble code P069E
- โ Inconsistent fuel pressure readings
Plug-and-Play Installation: No Dealer Visit Required
You can get your truck back on the road in under an hour. For the 2009 Colorado, the FPCM is typically located on a crossmember of the frame near the spare tire.
- Safety First: Disconnect the negative terminal from your vehicle’s battery.
- Locate the Module: Find the old FPCM mounted to the frame. It’s a small, finned aluminum box with an electrical connector.
- Disconnect and Remove: Carefully unplug the electrical harness. Then, unbolt the module from the frame. Corrosion on the bolts is common, so a little penetrating oil can help.
- Install the New Module: Bolt your new, pre-programmed FPCM into the same location.
- Connect and Finalize: Securely plug in the electrical connector until it clicks. Reconnect your battery terminal. Your installation is complete!
Guaranteed Compatibility and Performance
This module is a direct replacement for a wide range of GM trucks, SUVs, and vans. Simply provide your VIN at checkout, and we handle the rest. This part is a verified replacement for the following part numbers: 13501024, 15213110, 20759945, 20850907, 25785013, 25854536, 25866052, 25967325.
Frequently Asked Questions (FAQ)
Q: How do I know for sure my FPCM is the problem?
A: Besides the common symptoms like stalling and no-starts, a diagnostic code like P069E is the strongest indicator. A mechanic can also test for voltage at the fuel pump to confirm the FPCM is not sending a proper signal.
Q: What happens if I install this without it being programmed?
A: An unprogrammed FPCM will not communicate correctly with your vehicle’s main computer (ECM), and your truck will not start. Our pre-programming service makes this a non-issue, as it’s ready to install out of the box.
Q: How do I provide my VIN?
A: After you complete your purchase, you will need to send us your 17-digit VIN. We cannot ship your part until we receive this information to complete the programming.
Q: Is this a difficult part to replace myself?
A: For most DIYers with basic hand tools, this is a very manageable job. The primary challenge is often just accessing the module on the frame and dealing with any potential rust on the mounting bolts.
Q: Will this fit vehicles other than the 2009 Colorado?
A: Yes, this FPCM fits a huge range of GM vehicles from approximately 2007-2009, including the Silverado, Sierra, Tahoe, Yukon, Escalade, and many more. Please check the fitment list to confirm it matches your specific vehicle.