Programmed 2009-2011 Lucerne PCM | Part #12597125 | Plug-and-Play

Restore Your Vehicle’s Drivability

Get your car running smoothly again with this pre-programmed Engine Control Module for 2009-2011 Buick Lucerne and other GM models. We flash it with the latest GM software using your VIN for a perfect, plug-and-play fit. Order today to solve stalling, poor mileage, and check engine light issues!

$104.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Restore Your Vehicle’s Heartbeat and Drive with Confidence

Is your vehicle running rough, stalling unexpectedly, or flashing a persistent check engine light? These frustrating issues often point to the brain of your engine: the Powertrain Control Module (PCM). When the PCM falters, it can feel like your trusted vehicle has lost its way. This isn’t just an inconvenience; it’s a matter of reliability and peace of mind. We provide the definitive solution: a fully programmed PCM, part number 12597125, ready to restore the smooth performance and dependability you deserve.

Forget the expensive dealership visits and the hassle of finding a shop to program a replacement computer. We handle the critical programming for you. Simply provide your vehicle’s VIN during checkout, and our experts will flash this module with the latest, most stable software updates directly from GM. It arrives at your door, ready for a straightforward, plug-and-play installation, getting you back on the road quickly and affordably.

Signs Your PCM Needs Attention & The Benefits of This Solution

  • ✔ Check Engine Light On: Specifically for codes like P0601 (Internal Control Module Memory Check Sum Error) or P0606 (PCM Processor Fault).
  • ✔ Erratic Engine Behavior: Experiencing unexplained stalling, rough idling, hesitation, or poor fuel economy? A failing PCM is a common culprit.
  • ✔ Transmission Problems: Harsh or delayed shifting can be a sign that the PCM is not communicating correctly with the transmission controls.
  • ✔ No-Start Condition: If the engine cranks but won’t start, the PCM may not be firing the ignition coils or fuel injectors.
  • ✔ Communication Errors: Diagnostic trouble codes like U0100 (Lost Communication With ECM/PCM) indicate a critical failure.
  • ✔ VIN-Matched Programming: We flash the unit with your vehicle’s specific VIN, ensuring all systems, including anti-theft and optional equipment, function correctly from the moment of installation.

Expert Technician’s Tip

Before replacing your PCM, always perform a thorough check of your vehicle’s battery and grounding points. A weak battery or a corroded ground strap (especially the main engine-to-chassis ground) can cause erratic voltage, mimicking the symptoms of a failed computer. A few minutes with a multimeter can save you from replacing a perfectly good part. Confirming you have a stable 12V+ supply and clean grounds is a professional first step in any electronic diagnosis.

Guided Installation to Restore Peace of Mind

Installing your replacement 2009-2011 Lucerne PCM is a manageable job for a DIY enthusiast. Follow these steps to ensure a smooth process and get your vehicle running right.

  1. Safety First: Always disconnect the negative terminal of your vehicle’s battery and secure it away from the post to prevent any electrical shorts.
  2. Locate the Old PCM: On most compatible vehicles, the PCM is found in the engine bay, often under the air cleaner box or mounted to the fender well. It will have several large electrical connectors attached.
  3. Disconnect and Remove: Carefully unplug the wiring harnesses. These connectors have locking tabs that need to be released. Once disconnected, unbolt the module from its mounting bracket and remove it from the vehicle.
  4. Install the New Module: Mount your new, pre-programmed PCM in the same location. Secure the bolts and then firmly reconnect the wiring harnesses, making sure they click into place.
  5. Reconnect Power: Re-attach the negative battery terminal and tighten it securely.
  6. Final Steps: Turn the key to the ‘ON’ position (without starting the engine) for 10-15 seconds. This allows the vehicle’s systems to recognize the new module. Then, start the engine. It may run slightly rough for the first few minutes as it completes its idle relearn process. A short test drive will complete the adaptation.

Tailored Fit for Your GM Vehicle

This module, service number 12597125, is the correct replacement for a wide range of GM cars, trucks, and vans. It is a direct fit for units with service numbers 12612397, 126140, 12594750, 12629019, 12635902, and 12611549. Please confirm your vehicle is on the list below:

  • AURA: 2008-2009 (2.4L, w/o hybrid)
  • COBALT: 2007-2010 (2.2L, 2.4L – check VIN)
  • EXPRESS 1500 VAN: 2008-2009 (4.3L)
  • G5: 2007-2010
  • G6: 2008-2010 (2.4L)
  • HHR: 2007-2011 (2.2L, 2.4L)
  • IMPALA: 2010-2011
  • LUCERNE: 2009-2011 (3.9L) – The primary model for this 2009-2011 Lucerne PCM.
  • MALIBU: 2007-2012 (2.2L, 2.4L, 3.5L – check style/options)
  • SAVANA 1500 VAN: 2008-2009 (4.3L)
  • SIERRA 1500 PICKUP: 2007-2009 (4.3L, w/o hybrid)
  • SILVERADO 1500 PICKUP: 2007-2009 (4.3L, w/o hybrid)
  • SKY: 2008-2010 (2.4L)
  • SOLSTICE: 2008-2010 (2.4L)
  • VUE: 2008-2010 (2.4L)

Frequently Asked Questions

How do I provide my vehicle’s VIN?

After you complete your purchase, simply reply to your order confirmation email with your 17-digit Vehicle Identification Number (VIN). You can also add it as a note during the checkout process. We cannot ship your part until we receive the VIN.

Is any additional programming required after installation?

No. This module is a complete plug-and-play solution. We flash it with your VIN and the latest GM software, so no trip to the dealer is necessary. In some cases, a security or crank position sensor relearn procedure may be needed, which can be initiated with many standard scan tools.

What if my original part number is not on the list?

The service numbers listed (like 12597125, 12612397, etc.) are the most important identifiers. If your vehicle model and engine match our compatibility list, and your old module has one of these service numbers, this is the correct part for you, even if the primary part number differs.

Is this a brand new part?

This is a high-quality, fully tested replacement part that has been meticulously inspected and prepared to meet or exceed original factory specifications. It is programmed and verified to ensure lasting performance and reliability.

What is your warranty policy?

We stand behind our work with a comprehensive warranty. Please refer to the warranty section on our website for specific terms and conditions, ensuring your purchase is protected.

Condition

Refurbished

Manufacturer Part Number

Year
Genuine OEM

Yes

Year

2007, 2008, 2009

Model

LUCERNE

Brand

GM

MPN

12638026

Interchange part number

Hardware Type

Scroll to Top