End Your Engine Troubles and Get Back on the Road Fast
Is your Pontiac Wave, Chevy Aveo, or Sonic running rough, stalling unexpectedly, or refusing to start? A persistent Check Engine Light can be more than just an annoyance—it’s a sign that your vehicle’s brain, the Engine Control Module (ECM), is failing. This isn’t just a part; it’s the core of your car’s performance and reliability. Our pre-programmed ECM is the definitive, hassle-free solution to restore your vehicle’s performance and give you back the peace of mind you deserve.
Common Symptoms of a Failing ECM & Your Direct Solution
A faulty engine computer can cause a wide range of frustrating issues. If you’re experiencing any of the following, this module is the solution you’ve been looking for. This professionally programmed 2009-2010 Pontiac Wave ECM is engineered to resolve these exact problems:
- Persistent Check Engine Light (CEL) with codes like P0601, P0602, P0606
- Engine stalling or shutting off while driving
- Rough or erratic idling
- Complete no-start condition where the engine cranks but won’t fire
- Noticeable decrease in fuel economy
- Hesitation or stumbling during acceleration
- Erratic automatic transmission shifting
Forget the expensive trip to the dealership and the uncertainty of a used, unprogrammed part. We take the guesswork out of the repair by flashing this unit with the latest GM software, specifically matched to your vehicle’s VIN.
Features & Benefits: The Smart Choice for Your Repair
- ✔ Plug & Drive Installation: Arrives pre-programmed to your exact VIN. No additional, costly dealership programming is required.
- ✔ Latest GM Software: We flash the module with the most current updates from General Motors, ensuring optimal engine performance, fuel efficiency, and emissions control.
- ✔ Guaranteed Compatibility: This unit is a direct replacement for multiple part numbers, including 12679199, 12642927, 12636386, 12621466, and 12630789.
- ✔ Solves Common Issues: Specifically addresses frustrating problems like stalling, no-start conditions, and module-related diagnostic trouble codes.
- ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
An Expert’s Note on VIN Programming: As a technician, I’ve seen countless DIY repairs go sideways because of an unprogrammed module. Modern vehicles are complex systems where components must communicate perfectly. By programming this 2009-2010 Pontiac Wave ECM to your VIN *before* it ships, we ensure it communicates correctly with your car’s anti-theft system, transmission, and other modules right out of the box. This simple step saves you hours of frustration, potential towing bills, and the high cost of dealership-only tools.
Vehicle Fitment:
This part will fit these makes and models with these options:
- CRUZE 11-12 Electronic Control Module; 1.8L
- AVEO 09-11 Electronic Control Module
- SPARK 13 Electronic Control Module
- WAVE 09-10 Electronic Control Module
- TRAX 13-14 Electronic Control Module; 1.8L
- SONIC 12 Electronic Control Module; 1.8L
- G3 09-10 Electronic Control Module
Take control of your repair with a reliable, professionally prepared 2009-2010 Pontiac Wave ECM. Order today and restore your vehicle to its proper running condition.
Frequently Asked Questions
Do I need to do any programming or flashing myself?
Absolutely not. This ECM is delivered to you fully programmed to your vehicle’s specific VIN. It is ready for installation right out of the box, making it a true plug-and-drive solution.
How do I provide my VIN number?
After you complete your purchase, we will contact you to request your vehicle’s 17-digit VIN. We cannot ship the part until we have this information, as it is essential for the programming process.
Will this fix my car’s problem for sure?
This ECM is a direct solution for failures within the engine computer itself, which cause the symptoms listed above. However, it’s always essential to have a proper diagnosis performed to rule out other potential issues like faulty sensors or wiring problems.
What is the security relearn procedure?
In most cases, you will need to perform a simple security relearn procedure after installation, which can be done without any special tools. It typically involves turning the key to the ‘ON’ position for 10-15 minutes, then off, and repeating this cycle two or three times. We can provide simple instructions for this process.
Is this a brand new part from GM?
This is a high-quality, fully tested replacement part that meets or exceeds original specifications. It is programmed with official GM software to ensure perfect function and reliability.