Is your 2009 or 2010 Jeep Grand Cherokee or Commander acting up? If you’re dealing with frustrating issues like stalling, a persistent check engine light, or a complete no-start condition, a failing Engine Control Module (ECM) is often the culprit. Don’t let a faulty computer keep your reliable SUV off the road. This direct-fit engine computer is the simple, effective solution you need, arriving at your door fully programmed and ready for a hassle-free installation.
Common Symptoms & Your Direct-Fit Solution
A failing ECM can cause a wide range of confusing and intermittent problems. If your vehicle is experiencing any of the following, this part is designed to be the definitive fix:
- Engine stalling or cutting out while driving
- Rough or inconsistent idling
- Failure to start, even with a good battery and starter
- Check Engine Light (CEL) with communication-related codes (e.g., P0601, P0606)
- Poor fuel economy and reduced engine performance
- Unexplained electrical issues or warning lights on the dash
This isn’t just a replacement part; it’s a complete solution. We handle the complex programming so you don’t have to. By ordering this 2009-2010 Jeep Grand Cherokee 3.7L Engine Computer, you are bypassing the expensive dealership visits and complex programming procedures, getting your Jeep back to factory-spec performance with one simple swap.
Features & Tangible Benefits
- โ Completely Plug & Play: This unit arrives pre-programmed to your vehicle’s specific VIN and mileage. No extra trips to the dealer or mechanic for flashing are required.
- โ Restores Peak Performance: Solves common drivability problems like stalling, rough idle, and poor acceleration, returning your Jeep’s engine to its smooth and reliable state.
- โ Guaranteed Compatibility: Engineered to be a direct replacement for a wide range of original part numbers, ensuring a perfect fit and function. (See compatible numbers below).
- โ Cost-Effective Repair: Save hundreds of dollars compared to sourcing and programming a new unit from a dealership.
- โ Built for Durability: Each unit is meticulously inspected to ensure it meets or exceeds original equipment standards for long-lasting reliability.
- โ Peace of Mind Included: This unit is backed by our one-year replacement warranty.
Expert Insight: The “Simple Swap” That Solves Complex Problems
“We had a customer with a ’09 Grand Cherokee that had been to three different shops. It had an intermittent no-start problem that nobody could pin down. They had already replaced the crank sensor and checked the fuel pump. After confirming the battery and grounds were solid, we suggested the ECM. Because our 2009-2010 Jeep Grand Cherokee 3.7L Engine Computer comes pre-programmed, the customer was able to install it himself in his driveway in under 30 minutes. The Jeep fired right up and the problem never returned. It’s a powerful reminder that sometimes the most complex-seeming electronic issues have a straightforward, plug-in solution.”
This engine computer is compatible with the following part numbers: 05150467AA, 05150467AB, 68028166AB, 68028166AC, 68028166AD, 68028166AE, 68028166AF, 05150467AB, 68060531AB, 68060531AC, 68060531AD, 68059198AA, 68059198AB, 68028167AB, 68028167AC, 68028167AD, 68028167AE, 68028162, 68059197, 68028163, 68028154, 68059196, 68028155, 68028155AD, 68028150, 68059195, 68028151, 68028174, 68028175, 68028176.
Don’t stay sidelined by a bad module. Order your pre-programmed 2009-2010 Jeep Grand Cherokee 3.7L Engine Computer today and restore the dependability you expect from your Jeep.
Frequently Asked Questions
Is this engine computer truly “Plug & Play”?
Yes, absolutely. We use the VIN you provide during checkout to flash the computer with your vehicle’s exact software and security information. When it arrives, you simply disconnect the old unit and connect this one. No further programming is needed.
What information do you need from me?
To ensure perfect programming, we require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your driver’s side dashboard (visible through the windshield) or on your vehicle’s registration.
Will this definitely fix my Jeep’s running problems?
This unit is a guaranteed fix for problems directly caused by a faulty engine computer. While the symptoms listed are very common for ECM failure, we always recommend proper vehicle diagnosis to rule out other potential issues like bad sensors or wiring problems before ordering.
Does this part also fit the 2009-2010 Jeep Commander 3.7L?
Yes, it does. This engine computer is the correct module for both the 2009-2010 Jeep Grand Cherokee and the 2009-2010 Jeep Commander, as long as your vehicle is equipped with the 3.7L engine.
How do I find my original part number to confirm a match?
Your original part number is printed on a sticker on the housing of your current engine computer. While matching the number provides extra confidence, our programming process ensures compatibility as long as your vehicle is a 2009-2010 Grand Cherokee or Commander with the 3.7L engine.
What is the warranty on this part?
This unit is backed by our one-year replacement warranty. This gives you confidence and protection in your purchase.