End Your Jeep’s Frustrating Engine Problems for Good
Is your 2009 or 2010 Jeep Commander or Grand Cherokee suddenly unreliable? If you’re dealing with stalling, a no-start condition, a persistent check engine light, or erratic engine behavior, a failing Engine Control Unit (ECU) is often the culprit. This critical component is the brain of your vehicle, and when it fails, it can cause a host of confusing and stressful issues. Instead of spending a fortune on dealership diagnostics and programming fees, you can get a reliable, permanent solution right here. This is the direct-fit, pre-programmed 2009-2010 Jeep Commander 3.7L Engine Computer you need to get back on the road with confidence.
Common Failure Symptoms & Your Direct Solution
A faulty engine computer can manifest in many ways, often mimicking other sensor or component failures. If you’re experiencing any of the following, this module is your most likely solution:
- No-Start Condition: The engine cranks but refuses to start.
- Stalling: The engine cuts out unexpectedly while driving or at idle.
- Poor Fuel Economy: A sudden and unexplained drop in your MPG.
- Check Engine Light: Specifically for codes like P0601 (Internal Control Module Memory Check Sum Error) or P0606 (ECM/PCM Processor Fault).
- Communication Errors: Your diagnostic scanner cannot communicate with the ECU.
- Erratic Shifting or Misfires: The computer fails to properly control transmission or ignition timing.
Our replacement 2009-2010 Jeep Commander 3.7L Engine Computer arrives ready to install, completely bypassing the need for expensive tools or a trip to the dealer. We handle all the complex programming for you, providing a simple and effective repair.
Features & Benefits
- ✔ True Plug & Play Installation: This unit comes fully programmed to your vehicle’s specific VIN and mileage. Just connect it and turn the key.
- ✔ No Dealership Required: Save hundreds of dollars and significant time by avoiding dealership programming fees and scheduling hassles.
- ✔ Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, ensuring a perfect fit and function for your 3.7L Commander or Grand Cherokee. See the full list below.
- ✔ Restored Performance: Solves common issues like stalling, no-start conditions, and poor fuel economy, returning your Jeep to its original factory performance.
- ✔ Peace of Mind: This unit is backed by our one-year replacement warranty.
From a Veteran Technician: The Right Fix, The First Time
“I had a customer with a 2010 Grand Cherokee 3.7L that had been to two other shops. It had a random stalling issue that nobody could pin down. They had replaced sensors and even the fuel pump. After checking the basics, I suspected the ECU. The dealership wanted over $1200 for a new unit and programming. We ordered this pre-programmed computer instead. The installation took less than 30 minutes in their driveway. The Jeep fired right up and has been running perfectly ever since. This isn’t just a part; it’s the simple, correct solution that saves drivers from a world of diagnostic headaches.”
This engine computer is a direct replacement for the following part numbers: 05150467AA, 05150467AB, 68028166AB, 68028166AC, 68028166AD, 68028166AE, 68028166AF, 05150467AB, 68060531AB, 68060531AC, 68060531AD, 68059198AA, 68059198AB, 68028167AB, 68028167AC, 68028167AD, 68028167AE, 68028162, 68059197, 68028163, 68028154, 68059196, 68028155, 68028155AD, 68028150, 68059195, 68028151, 68028174, 68028175, 68028176.
Don’t let a faulty ECU keep your Jeep parked. Order your pre-programmed 2009-2010 Jeep Commander 3.7L Engine Computer today and get back to driving with confidence.
Frequently Asked Questions
What information do you need to program the computer?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This ensures the computer is a perfect electronic match for your Jeep, making the installation truly Plug & Play.
Is this really a “Plug & Play” part?
Absolutely. “Plug & Play” means we handle all the necessary flashing and programming before we ship the unit. Once you receive it, you simply disconnect the old computer and install this one. No additional programming or dealer visits are required.
Will this fit my 2009 Grand Cherokee 3.7L?
Yes, this engine computer is compatible with both the 2009-2010 Jeep Commander and the 2009-2010 Jeep Grand Cherokee, as long as your vehicle is equipped with the 3.7L engine.
How do I know my original computer is the problem?
While the symptoms listed above are strong indicators, it’s always best to have a qualified mechanic perform a thorough diagnosis. Common ECU failure codes like P0601 or P0606 are definitive signs. This part will only resolve issues directly caused by a failing engine computer.
What does the warranty cover?
This unit is backed by our one-year replacement warranty. This covers any defects in the computer itself. For full details, please refer to our warranty policy page.