Restore Your Jeep’s Performance and Reliability
Is your 2009-2010 Jeep Commander or Grand Cherokee suffering from frustrating and unpredictable engine issues? Stalling at stoplights, rough idling, a persistent check engine light, or a complete no-start condition can all point to a failing Engine Control Module (ECM). Don’t let a faulty computer keep your capable SUV sidelined. This professionally programmed ECM is the definitive, hassle-free solution to restore your vehicle’s factory performance and get you back on the road with confidence.
Common Symptoms & Your Solution
A failing ECM can manifest in numerous ways, often mimicking other component failures and leading to costly, incorrect repairs. If you’re experiencing any of the following, a faulty engine computer is the likely culprit:
- Persistent Check Engine Light (CEL) with codes like P0601, P0606, or other communication errors.
- Unexplained stalling or engine shutting off while driving.
- Rough or erratic idling and poor engine performance.
- Noticeable decrease in fuel economy.
- Transmission shifting problems or failure to shift properly.
- The engine cranks but refuses to start.
This unit is your direct solution. We take the guesswork out of the repair by pre-programming this 2009-2010 Jeep Commander 3.7L ECM to your vehicle’s specific Vehicle Identification Number (VIN) and mileage. This ensures perfect communication with your Jeep’s other modules, making the installation process truly plug-and-play. You can bypass expensive dealership programming fees and complex diagnostic procedures.
Features & Benefits
- ✔ Plug & Play Installation: Arrives fully programmed to your VIN. No additional flashing or dealership visits are required. Simply install the unit and turn the key.
- ✔ Guaranteed Compatibility: A direct replacement for a wide range of part numbers, ensuring a perfect fit for your 2009-2010 Jeep Commander or Grand Cherokee with the 3.7L engine.
- ✔ Solves Complex Issues: Engineered to resolve common drivability problems caused by a failing computer, restoring smooth operation and fuel efficiency.
- ✔ Cost-Effective Repair: Save hundreds of dollars compared to a new unit and programming costs at a dealership or repair shop.
- ✔ Guaranteed Performance: This unit is backed by our one-year replacement warranty.
Expert Technician’s Insight
As a technician, I’ve seen countless vehicle owners waste time and money chasing down phantom issues caused by a bad ECM. A common mistake is buying a used module from a salvage yard. While it might seem cheaper initially, that used computer is programmed for a different vehicle. It won’t work correctly without being flashed by a dealer, which often costs more than this pre-programmed solution. This 2009-2010 Jeep Commander 3.7L ECM eliminates that entire headache. It’s the most efficient path to a reliable repair, saving you the frustration of a failed install and the expense of a tow to the dealership.
Fitment & Part Number Cross-Reference
This module is a direct fit for the following vehicles equipped with the 3.7L engine:
- 2009-2010 Jeep Commander
- 2009-2010 Jeep Grand Cherokee
This unit is compatible with and replaces the following part numbers: 05150467AA, 05150467AB, 68028166AB, 68028166AC, 68028166AD, 68028166AE, 68028166AF, 05150467AB, 68060531AB, 68060531AC, 68060531AD, 68059198AA, 68059198AB, 68028167AB, 68028167AC, 68028167AD, 68028167AE, 68028162, 68059197, 68028163, 68028154, 68059196, 68028155, 68028155AD, 68028150, 68059195, 68028151, 68028174, 68028175, 68028176, and more. Ordering our programmed 2009-2010 Jeep Commander 3.7L ECM ensures you get the right part, ready to install, the first time.
Frequently Asked Questions
Is this module truly Plug & Play?
Yes. We flash the unit with your vehicle’s specific VIN and the latest software updates before it ships. This ensures it communicates perfectly with your Jeep’s existing systems, like the ignition and security modules, right out of the box. No further programming is needed.
How do I provide my VIN and mileage?
After you place your order, you will be prompted to provide your vehicle’s VIN and current mileage. You can also add this information in the notes section at checkout. This step is crucial for the programming process.
Where is the ECM located on my 2009-2010 Jeep?
On both the Commander and Grand Cherokee models from 2009-2010, the ECM is typically located in the engine compartment on the right-hand (passenger) side, often near the firewall or inner fender.
What if my original part number isn’t on your list?
The list provided covers the most common part numbers, but there may be others. As long as your vehicle is a 2009-2010 Jeep Commander or Grand Cherokee with the 3.7L engine, this module will be the correct one for your application. The VIN programming ensures it works perfectly.
Do I need to send my old ECM (core) back?
No core charge or return is required for this part. You can keep or responsibly dispose of your old module.