Programmed 2008 Dodge Avenger Engine Computer | Plug & Play ECM

Get Back on the Road with Confidence

End the frustration of a faulty ECM. This pre-programmed engine computer for your 2008 Dodge Avenger or Sebring is the simple, reliable fix you need. Just plug it in and drive—no extra programming needed. Restore your car’s performance and your peace of mind. Order today for a hassle-free repair.

$249.95

+11.99 USPS Priority Shipping

Availability: Only 2 left in stock



Guaranteed Safe Checkout

Restore Your Avenger’s Performance and Reliability

Are you dealing with frustrating and unpredictable issues with your 2008 Dodge Avenger or 2007-2008 Chrysler Sebring? A faulty Engine Control Module (ECM) can turn a reliable daily driver into a source of constant stress. If your vehicle is stalling, running rough, refusing to start, or displaying a persistent Check Engine Light, you’ve found the definitive solution. This replacement engine computer arrives at your door fully programmed to your vehicle’s specific VIN, offering a true Plug & Play installation that gets you back on the road without an expensive trip to the dealership.

Common Symptoms & Your Solution

A failing ECM can manifest in various ways, often mimicking other sensor or component failures. If you’re experiencing any of the following, a faulty module is the likely culprit:

  • Check Engine Light: Persistent illumination, especially with communication-related Diagnostic Trouble Codes (DTCs) like U0100.
  • No-Start Condition: The engine cranks but refuses to start, or starts and immediately stalls.
  • Poor Performance: Noticeable loss of power, hesitation during acceleration, and decreased fuel economy.
  • Erratic Shifting: The transmission may shift harshly, get stuck in gear, or behave unpredictably.
  • Intermittent Stalling: The engine shuts off unexpectedly while driving or idling.

This pre-programmed 2008 Dodge Avenger engine computer is the direct answer to these problems. We handle all the complex programming for you, so you can perform the repair with confidence, whether you’re a seasoned DIYer or having your trusted local mechanic do the work.

Features & Benefits

  • āœ” Plug & Play Installation: Arrives fully programmed to your vehicle’s VIN and mileage. No extra dealer flashing or initialization is required.
  • āœ” Restored Drivability: Solves common issues like stalling, rough idle, and poor acceleration, bringing back your car’s smooth and reliable operation.
  • āœ” Guaranteed Compatibility: This unit is a direct replacement for a wide range of original part numbers, ensuring a perfect fit and function for your Avenger or Sebring.
  • āœ” Cost-Effective Repair: Avoid the high costs and scheduling hassles associated with dealership programming and diagnostics.
  • āœ” Built to Last: Each module is meticulously inspected and prepared to meet or exceed original equipment standards for long-term dependability.
  • āœ” This unit is backed by our one-year replacement warranty.

An Expert’s Note on Installation

“Before you install your new 2008 Dodge Avenger engine computer, take a moment to inspect your vehicle’s battery terminals and main engine ground straps. A weak or corroded connection can cause voltage drops that mimic the symptoms of a bad ECM. Ensuring you have a clean, tight, and fully charged electrical system is the single most important step you can take to guarantee a successful and lasting repair. It’s a 5-minute check that can save you hours of headache.”

By providing your VIN at checkout, you ensure that the 2008 Dodge Avenger engine computer you receive is perfectly matched to your vehicle’s specific configuration. This critical step guarantees seamless communication between the module and all other systems in your car, from the engine and transmission to the anti-lock brakes and security system.

Frequently Asked Questions

What does ‘Plug & Play’ actually mean?

It means the engine computer will arrive at your door fully programmed with the latest software updates and coded specifically to your car’s VIN. You simply need to disconnect the old module and connect this one. No additional steps or expensive dealer tools are required.

Do I need to send my old computer back?

No. There is no core charge or requirement to return your original module, which saves you time and the cost of return shipping.

Where do I provide my VIN?

You can enter your vehicle’s 17-digit VIN during the checkout process. This information is essential for us to program the module correctly for your specific vehicle.

Will this fit my 2007 Chrysler Sebring with the 3.5L engine?

Yes, this engine computer is compatible with both the 2007-2008 Chrysler Sebring and the 2008 Dodge Avenger equipped with either the 2.7L or 3.5L engine options. It is a direct replacement for all part numbers listed in the description.

What if my original part number isn’t on the list?

The provided list covers the most common part numbers. If you don’t see yours, please contact us with your VIN. We can verify compatibility and ensure you receive the correct part for your vehicle.

Genuine OEM

Yes

Year

Condition

Refurbished

MPN

05094721AJ

Interchange part number

PartNumber

590

Model

AVENGER

Year

2008

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , ,

superseded part number

05033708AD 05033708AE 05033708AF 05094721AA 05094721AB 05094721AC, 05094721AE 05094721AG 05094721AH 05094721AI 05094721AJ 05094721AK, 05094721AL 05094721AM 05094721AN 05150157AH 05094721AO 05094858AA, 05094858AC 05094858AD 05094858AE 05094858AF

Scroll to Top