Get Your Savana 1500 Back in Service, Fast.
When your GMC Savana van is plagued by strange electrical problems, your work grinds to a halt. Flickering lights, unresponsive door locks, erratic warning messages, or a dead battery aren’t just minor annoyances—they represent costly downtime and lost revenue. This Body Control Module (BCM) is the definitive, reliable solution to restore your van’s critical functions and get you back on the road. It arrives programmed specifically to your vehicle’s VIN, eliminating the need for expensive dealership programming and saving you valuable time.
Common Symptoms of a Failing BCM & Your Solution
If your van is experiencing any of the following issues, a faulty BCM is the most likely culprit. This module is engineered to resolve these problems directly:
- Power windows, mirrors, or door locks working intermittently or not at all.
- Interior or exterior lights staying on or not turning on correctly.
- The security system acting erratically or preventing the engine from starting.
- False warning lights appearing on the instrument cluster (e.g., ABS, Airbag, Traction Control).
- Unexplained battery drain that leaves you stranded.
By installing our pre-programmed 2008-2012 Savana 1500 Body Control Module 25826124, you are not just replacing a part; you are restoring the central nervous system of your vehicle’s electronics with a component that is ready for installation right out of the box.
Features & Benefits
- ✔ Ready to Install, Programmed to Your VIN: We flash the module with the latest GM software using your vehicle’s VIN before it ships. This critical step ensures seamless communication with your van’s other systems and saves you a trip to the dealer.
- ✔ Restores Full Electrical Function: Regain reliable control over your vehicle’s lights, locks, windows, and security features, eliminating frustrating and unpredictable behavior.
- ✔ No Core Charge Required: Keep your old module. There are no core charges or hassles with returning the original part, simplifying your repair process.
- ✔ Direct-Fit OEM Replacement: Engineered to match the original factory specifications for a perfect fit and flawless operation across a wide range of GM vehicles.
- ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
Expert Insight from the Garage
“A failing BCM can be a master of disguise. We’ve seen customers spend hundreds chasing what they thought were bad window motors, faulty light switches, or even alternator problems. In reality, the BCM was the root cause, sending incorrect signals throughout the vehicle. The beauty of a pre-programmed module is that it takes the guesswork out of the equation. It’s the most efficient way to fix these complex electrical ‘gremlins’ and avoid unnecessary diagnostic time and expenses, which is critical for a work vehicle like the Savana.”
Installation & Post-Install Procedures
After purchasing, simply provide us with your vehicle’s VIN. We will program the module and ship it to you. While the installation is straightforward for many, please be aware of potential post-installation steps:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the systems.
- Brake Pedal Position Relearn: A brake pedal position sensor recalibration may be necessary on some models to ensure proper brake light and traction control function.
We always recommend consulting a factory service manual or a qualified technician for your specific vehicle.
This 2008-2012 Savana 1500 Body Control Module 25826124 is a direct replacement for the following part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Extensive Vehicle Fitment:
This BCM fits a wide variety of GM models, including but not limited to: ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, EXPRESS VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10. Please verify your part number for an exact match.
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No. The main benefit of our service is that we program the Body Control Module to your vehicle’s specific VIN before we ship it. This saves you the time, cost, and hassle of a dealership visit.
What information do you need from me?
After you complete your purchase, you will need to provide us with your 17-digit Vehicle Identification Number (VIN). We cannot ship the module without it, as the programming is essential for it to function correctly in your vehicle.
Is this a simple plug-and-play installation?
For the most part, yes. It is designed to be a direct replacement. However, as with many modern electronic components, some vehicles may require additional ‘relearn’ procedures for systems like the airbag or brake pedal position sensor. These typically require a professional-grade scan tool.
What happens if my airbag light comes on after installation?
This is a known possibility. It means the new BCM needs to be electronically synced with the airbag system’s Supplemental Deployment Module (SDM). A qualified technician with a high-level scan tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve it.
How can I be sure my BCM is the problem?
Common signs of a failing BCM include a cluster of seemingly unrelated electrical issues, such as power locks and windows failing, interior lights acting erratically, security system faults, or persistent battery drain. While you should always perform proper diagnostics, these symptoms strongly point to the BCM.
What is a ‘core charge’?
A core charge is a deposit that is refunded when you return your old, failed part. We do not have a core charge on this item, which simplifies the process for you. You can keep or dispose of your original module.