Is Your Savana Van Plagued with Baffling Electrical Issues?
When your reliable GMC Savana starts acting up with strange electrical problems—like power windows that won’t budge, interior lights with a mind of their own, or a frustrating no-start condition—the Body Control Module (BCM) is often the culprit. This component is the central nervous system for your van’s body electronics. A failing BCM can bring your work to a grinding halt, costing you time and money. This is the straightforward, reliable solution to get your workhorse back on the road without the dealership hassle.
Common BCM Failure Symptoms & Your Direct-Fit Solution
If you’re experiencing any of the following, a faulty BCM is the likely cause. This pre-programmed module is designed to resolve these issues permanently:
- Erratic or non-functional power windows, door locks, and mirrors
- Interior or exterior lights staying on or not working at all
- Intermittent no-start or security system warning lights
- Dashboard warning lights flashing incorrectly
- Communication error codes (U-codes) when scanned with a diagnostic tool
Our 2008-2012 Savana 1500 Body Control Module arrives ready for installation, taking the guesswork and extra steps out of your repair.
Features & Benefits
- ✔ VIN-Programmed for Your Van: We flash the module with the latest GM software using your vehicle’s VIN. This ensures perfect compatibility and function right out of the box.
- ✔ Eliminate Dealer Programming: Save hundreds of dollars and valuable time by skipping the expensive programming session at a dealership. This is a true plug-and-play repair.
- ✔ No Core Charge Required: Keep your old BCM. There’s no need to worry about the cost or hassle of sending a core back to us.
- ✔ Restores Full Functionality: Get your van’s critical electronic systems—from power locks to interior lighting—working like new again.
- ✔ This unit is backed by our one-year replacement warranty.
An Expert’s Note on Programming:
Many technicians and DIYers get stuck after installing a blank BCM. The vehicle won’t start, or multiple systems won’t work because the module isn’t synced to the van’s other computers. By providing us with your VIN, you bypass this entire roadblock. We handle the complex programming on our bench, so when the part arrives at your door, the most difficult part of the job is already done. This is the smartest way to minimize your van’s downtime and get the repair done right the first time.
Guaranteed Fitment Information
This BCM is a direct replacement for a wide range of GM vehicles. While this listing is for the 2008-2012 Savana 1500 Body Control Module, please verify your part number or vehicle in the comprehensive list below to ensure perfect compatibility.
This listing is for a Body Control Module that is programmed/flashed for your vehicle with the newest updates from gm using your vin to match your vehicle. After you purchase the BCM you will need to provide us with your vin so we can program the BCM before we ship it to you. This computer will fit the following part numbers: 10382479 15093910 15276271 15299986 15819552 15828601 15837419 15872388 15872421 15880684 15921352 15921353 15948438 15948439 20815898 20839063 20864767 20864768 20921435 20921436 20935349 22860591 25826124 25826125 25847588 25847589 25892622 25910474 25934762 25934763 95151084
Â
This part will fit these makes and models with these options
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
EXPRESS 3500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
IMPALA 06-12 Body Control (BCM); (LH dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
ACADIA 07-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
TAHOE 10 Body Control (BCM); (under steering column), ID 25892622
TRAVERSE 09-12 Body Control (BCM); (LH dash)
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 2500 VAN 11-12 Body Control (BCM); (center dash)
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 22860591
DTS 06-11 Body Control (BCM); (RH center dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 11-12 Body Control (BCM)
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
STS 10 Body Control (BCM); center dash
SAVANA 3500 VAN 08-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.0L
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898
CTS 08-13 Body Control (BCM); LH dash
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921436
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
G8 08-09 Body Control (BCM); (center dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 4.8L
EXPRESS 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898
ESCALADE 10 Body Control (BCM); (under steering column), ID 25892622
LUCERNE 06-11 Body Control (BCM); (right side dash)
CTS 08 Body Control (BCM); RH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 4.8L
SAVANA 3500 VAN 10 Body Control (BCM); (center dash), 6.0L
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 25892622
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898
SRX 07-09 Body Control (BCM); LH dash
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898
EXPRESS 3500 VAN 11-12 Body Control (BCM)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
SAVANA 3500 VAN 11-12 Body Control (BCM)
VUE 08-10 Body Control (BCM); (center dash)
CAPRICE 11-13 Body Control (BCM)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EXPRESS 2500 VAN 08-09 Body Control (BCM); (center dash)
SAVANA 2500 VAN 10 Body Control (BCM); (center dash), 6.6L, VIN 6 (8th digit, opt LMM)
Important Post-Installation Information
While this BCM is programmed for plug-and-play installation, some vehicles may require additional, simple relearn procedures using a professional scan tool. This is normal and ensures all systems communicate correctly.
- Airbag System Sync: If your airbag light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the systems.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be required for proper brake light and traction control function.
Frequently Asked Questions
How do I provide my VIN for programming?
After you complete your purchase, we will contact you for your vehicle’s 17-digit VIN. You can also add it as a note during checkout. We cannot ship the module until we have this information to program it correctly.
Is this a difficult part to install?
For someone with moderate mechanical experience, the installation is straightforward. The BCM is typically located in the center dash area. The main benefit of our service is that the complex software programming is already done for you, making the physical swap the only step.
My original part number isn’t on your list, but my vehicle is. Will it fit?
The part numbers listed are the most common, but there are many superseded numbers. As long as your vehicle model and year are listed in the compatibility chart, this module will work. The VIN programming ensures it is a perfect match for your specific vehicle’s options.
Will I need any special tools for the installation?
Basic hand tools are all that’s needed for the physical installation. However, as noted, some vehicles may require a professional-grade scan tool for post-installation relearn procedures like the airbag system sync or brake pedal position sensor calibration.
What happens if I don’t perform the relearn procedures?
If your vehicle requires a specific relearn and it is not performed, you may have a persistent warning light (like the airbag light) or certain features may not operate as intended. These procedures ensure all of the vehicle’s computer systems are properly synchronized after the new BCM is installed.