Restore Your Truck’s Shifting Performance
Is your 2008-2012 Chevy Colorado shifting erratically, hesitating between gears, or stuck in limp mode? A failing Transmission Control Module (TCM) can sideline your dependable truck, causing frustrating and unpredictable driving behavior. Get back on the road with confidence with this VIN-programmed T42 TCM, the direct-fit solution designed to restore your truck’s smooth, reliable performance. This is the definitive fix for your transmission woes, ensuring every gear change is as crisp and timely as the day your truck left the factory. Don’t let a faulty module dictate your drive; take control with a reliable, pre-configured solution.
Common Symptoms & Your Solution
If you’re experiencing any of the following issues, a faulty TCM is the likely culprit. This module is engineered to be the direct solution, addressing these problems at their source:
- Harsh, erratic, or delayed gear shifts
- Vehicle stuck in a single gear (limp mode)
- Check Engine Light or Transmission Warning Light is on
- Diagnostic Trouble Codes (DTCs) such as P0700, P0750, or other solenoid-related codes
- Failure to upshift or downshift properly
- Poor fuel economy and transmission overheating
- Complete loss of transmission communication
Features & Benefits
- ✔ VIN-Programmed for Your Colorado: Arrives pre-programmed to your truck’s specific VIN using the latest GM calibrations. This ensures a perfect electronic match for a true plug-and-play installation, eliminating the need for expensive dealership programming.
- ✔ Restores Smooth Shifting: Directly commands your 4L60E transmission’s solenoids and torque converter, fixing harsh shifts, delayed engagement, and gear hunting for a like-new driving experience.
- ✔ Clears Fault Codes: Engineered to resolve common transmission-related Diagnostic Trouble Codes (DTCs), helping to turn off that persistent check engine light and restore proper system communication.
- ✔ OEM-Standard Quality: Built to strict General Motors specifications for dependable performance and long-term durability, whether you’re on the job site or the highway. When you install our 2008-2012 Colorado Transmission Control Module 24235340, you’re installing reliability.
- ✔ Direct-Fit Installation: Designed for a straightforward installation, typically located in the RH rear of the engine compartment on your 2008-2012 Colorado.
- ✔ Warranty Protection: This unit is backed by our one-year replacement warranty.
A Technician’s Note on VIN Programming
As a technician with over 20 years of experience, I’ve seen countless drivers frustrated by generic, non-programmed modules. They install the part, but the transmission still doesn’t communicate correctly with the engine and other vehicle systems. That’s because the TCM is the ‘brain’ of your transmission. Our VIN programming service isn’t just a convenience—it’s a critical step. We load your truck’s exact factory calibration file onto the 2008-2012 Colorado Transmission Control Module 24235340, ensuring it knows every parameter, from shift points to torque converter strategy. This prevents compatibility issues and guarantees the seamless, plug-and-play installation that gets you back to work without a second thought.
Frequently Asked Questions
Do I need to take this module to a dealer for programming?
No. This module arrives fully programmed to your vehicle’s specific VIN. It is ready for installation right out of the box, saving you the time and expense of a dealership visit.
Where is the TCM located on a 2008-2012 Chevy Colorado?
On the 2008-2012 Chevrolet Colorado and GMC Canyon, the Transmission Control Module is typically located in the engine compartment, on the right-hand (passenger) side, towards the rear.
Will this fix a P0700 trouble code?
A P0700 code is a general fault code indicating the TCM has detected a problem. While this module often resolves the root cause of the P0700, it’s crucial to diagnose any other specific codes that are present (e.g., solenoid codes) to confirm the TCM is the issue. Replacing a faulty TCM is a common fix for this code.
Is a core charge required for this part?
No, there is no core charge for this part. You can keep your old module without any additional fees or the hassle of returning it.
How do I provide my VIN for programming?
You can enter your Vehicle Identification Number (VIN) during the checkout process. Please double-check it for accuracy to ensure a perfect program for your specific truck. Your purchase of the 2008-2012 Colorado Transmission Control Module 24235340 depends on this information.