Restore Your Enclave’s Full Functionality
Are you dealing with baffling electrical issues in your Buick Enclave? Flickering lights, unresponsive power windows, a security system that acts up, or warning lights that won’t go away are all frustrating signs of a failing Body Control Module (BCM). This isn’t just an inconvenience; it’s a compromise on your vehicle’s comfort and reliability. This pre-programmed BCM is the definitive, hassle-free solution to restore your vehicle’s electronic systems to perfect working order.
Common Symptoms & Your Solution
A faulty BCM can cause a wide range of problems that seem unrelated. If you’re experiencing any of the following, this module is your answer:
- Erratic interior or exterior lights (flickering, staying on, or not working at all)
- Power windows, door locks, or mirrors failing to operate
- Malfunctioning keyless entry or security system alerts
- Instrument cluster gauges behaving unpredictably
- Warning lights (like the airbag or service vehicle light) appearing without cause
- Intermittent no-start conditions where the engine cranks but won’t turn over
Instead of paying for expensive diagnostic time and programming fees at a dealership, our 2008-2012 Buick Enclave BCM arrives at your door ready for installation. We handle the complex programming for you, saving you time, money, and stress.
Features & Benefits
- ✔ VIN-Programmed for Your Vehicle: We flash this module with the latest GM software using your specific VIN. This ensures perfect compatibility and function right out of the box.
- ✔ Skip the Dealership: Eliminate the need for a costly trip to the dealer for programming. This is a true plug-and-play solution for most vehicles.
- ✔ No Core Charge: Keep your old BCM. There are no hidden fees or complicated core return processes to worry about.
- ✔ Broad GM Compatibility: While perfect for the 2008-2012 Buick Enclave, this BCM also fits a vast range of other GM vehicles, including the Acadia, Traverse, Impala, and more. See the full fitment list below.
- ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty.
An Expert’s Diagnostic Tip
“Before condemning your BCM, always perform a thorough check of your vehicle’s battery and primary ground connections. A weak battery or a corroded ground wire can mimic BCM failure by causing low voltage issues and erratic electronic behavior. A simple check can sometimes save you hundreds of dollars. Once you’ve confirmed those are solid, a failing BCM is the most likely culprit, and this pre-programmed unit is the most efficient fix.”
What to Expect After Installation
This module is designed for a straightforward installation. However, in some vehicles, additional synchronization steps may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This requires a professional scan tool to sync the modules and clear the light.
- Brake Pedal Position Relearn: A brake pedal position sensor recalibration might be necessary on certain models to ensure proper brake light and traction control operation.
These procedures are standard for modern vehicles and can be performed by any competent repair shop if needed.
Guaranteed Fitment for a Wide Range of GM Vehicles
This BCM is a direct replacement for multiple part numbers, including: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084. It fits many models such as the Acadia, Equinox, Impala, Tahoe, Yukon, Express/Savana vans, and more.
Frequently Asked Questions
How does the programming process work?
It’s simple. After you complete your purchase, you will need to provide us with your vehicle’s 17-digit VIN. Our technicians will then use official GM equipment to flash the BCM with the correct software and settings for your specific vehicle before we ship it to you.
Is this something I can install myself?
For someone with moderate mechanical experience, installation is very manageable. The BCM is typically located under the driver’s side or center dash. The main challenge is access. Once installed, it connects directly to the existing wiring harnesses. However, always consult a service manual for your specific vehicle’s procedure.
Will I need any special tools for the installation?
Basic hand tools like a socket set and screwdrivers are usually all that’s required for the physical installation. However, as noted, some vehicles may require a professional diagnostic scan tool for post-installation procedures like an airbag system sync or brake pedal position relearn.
Do I need to return my old BCM?
No. This product has no core charge. You can keep, recycle, or dispose of your original module as you see fit. This saves you the hassle and expense of shipping a core back.
Is this a guaranteed fix for my vehicle’s electrical problems?
This programmed 2008-2012 Buick Enclave BCM is the direct solution for issues caused by a failed module. If your vehicle’s problems match the common symptoms and other potential causes (like a bad battery or grounds) have been ruled out, this part will restore proper function.