Programmed 2008-2010 Chrysler 300 3.5L ECM | Plug & Play Replacement

Restore Your Chrysler’s Performance & Your Peace of Mind.

End the frustration of a faulty engine computer. This Plug & Play ECM is professionally programmed to your car’s VIN, ensuring a perfect, hassle-free installation. Get your 3.5L Chrysler or Dodge running smoothly and reliably again. Experience the relief of a simple, effective solution and order now.

$204.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



Guaranteed Safe Checkout

Restore Peak Performance to Your Chrysler or Dodge

Is your Chrysler 300, Dodge Charger, Challenger, or Magnum suffering from frustrating and unpredictable issues? A faulty Engine Control Module (ECM) can be the hidden cause of everything from a persistent check engine light to a car that won’t start at all. Stop guessing and replace the brain of your engine with this reliable, pre-programmed solution. This module is the definitive fix for getting your vehicle back on the road, running just as it should. We handle the complex programming so you can enjoy a simple, straightforward installation.

Common Failure Symptoms & Your Direct-Fit Solution

If you’re experiencing any of the following, a failing engine computer is the likely culprit. This unit is designed to solve these exact problems:

  • Erratic engine performance, stalling, or hesitation
  • Poor fuel economy and rough idling
  • Check Engine Light (CEL) with communication codes (U-codes)
  • Diagnostic Trouble Codes (DTCs) like P0601, P0605, or P0606
  • Vehicle intermittently enters a ‘limp mode’ with reduced power
  • Complete no-start condition where the engine cranks but won’t fire

Instead of paying for expensive diagnostic fees and dealership programming, our 2008-2010 Chrysler 300 3.5L ECM arrives at your door ready to install. It’s the most efficient way to restore your vehicle’s factory performance and reliability.

Features & Benefits

  • ✔ Completely Plug & Play: No additional programming or dealer visits required. We flash the unit with your vehicle’s specific VIN and mileage before it ships.
  • ✔ Guaranteed Compatibility: This ECM is a direct replacement for a wide range of original part numbers, ensuring a perfect fit and function for your 3.5L equipped vehicle.
  • ✔ Solve Running Issues: Eliminates common problems caused by a faulty computer, from check engine lights to no-start conditions, restoring smooth and reliable operation.
  • ✔ Cost-Effective Solution: Avoid the high costs of a new part and programming labor from a dealership or repair shop.
  • ✔ Backed By a Warranty: This unit is backed by our one-year replacement warranty.

Expert Insight: The ‘No-Hassle’ Engine Fix

“A customer recently brought in his 2009 Dodge Charger with a classic P0601 ‘Internal Control Module Memory Check Sum Error’ code. The dealership quoted him over a thousand dollars for a new computer plus several hours of labor for programming. He was frustrated and felt stuck. We recommended this exact pre-programmed ECM. He installed it himself in under 30 minutes in his driveway with basic hand tools. The car fired up immediately, the check engine light was gone, and it has been running perfectly ever since. This isn’t just a part; it’s a complete, accessible solution that puts the power back in the owner’s hands.”

This 2008-2010 Chrysler 300 3.5L ECM is your path to a reliable repair. By matching the software to your specific vehicle, we ensure that all engine parameters, security information (immobilizer), and transmission controls work together seamlessly from the moment you connect it. Take control of your repair and get your car back to factory-spec condition.

Frequently Asked Questions

What does ‘Plug & Play’ actually mean?

It means the engine computer we send you is pre-programmed with your car’s specific Vehicle Identification Number (VIN) and mileage. Once you receive it, you simply disconnect the battery, swap out the old computer with this new one, and reconnect the battery. No special tools or trips to the dealership for programming are necessary.

Where do I provide my VIN and mileage?

You can provide your vehicle’s VIN and current mileage during the checkout process. There will be a clear field for you to enter this required information. We cannot ship the part until we have this information to program it correctly.

Will this fit my 2009 Dodge Charger 3.5L AWD?

Yes, absolutely. This ECM is compatible with the 2008-2010 Dodge Charger, 2008-2010 Chrysler 300, 2010 Dodge Challenger, and 2008 Dodge Magnum, provided they are equipped with the 3.5L engine and the specified drivetrain (AWD for Charger/300/Magnum). It replaces a long list of original equipment part numbers to ensure wide compatibility.

Do I need to send my old computer (core) back?

No core charge or return is required for this part. You can keep, recycle, or dispose of your old module at your convenience.

What if this doesn’t fix my problem?

While this 2008-2010 Chrysler 300 3.5L ECM is a definitive fix for the symptoms listed, we always recommend proper diagnostics. If the part does not solve your issue, you may have a different underlying problem (e.g., wiring, sensors). This part is backed by our one-year replacement warranty for any issues with the unit itself.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

5150301AD

Interchange part number

PartNumber

590

Model

300

Year

2010

Brand

Chrysler

Manufacturer Part Number

superseded part number

05150301AD 05150301AE 68054131AC 68054131AD 68054131AE 68054131AF, 05187022AC 05187022AD 05187022AE 05187022AF 05187022AG 05187022AH, 05187022AI 68054131AF 68054123AC 68054123AD 68054123AE 68054123AF, 68054124AC 68054124AD 68054124AE 68054124AF 68054125AC 

Scroll to Top