Programmed 2008-2010 Chevy Malibu 2.4L & 3.6L ECM | 12602044

Get Your Malibu Running Right Again!

End the frustration of a faulty engine computer. This ECM for your 2008-2010 Malibu comes fully programmed to your VIN, ready for installation right out of the box. Restore smooth performance, reliability, and your peace of mind. Add to cart to get back on the road with confidence!

$118.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08112-82 Categories: ,
Guaranteed Safe Checkout

Restore Your Malibu’s Performance and Reliability

Is your 2008-2010 Chevrolet Malibu suffering from frustrating issues like intermittent stalling, a persistent check engine light, rough idling, or a complete no-start condition? These are classic signs of a failing Engine Control Module (ECM). Don’t let a faulty computer keep you sidelined. This direct-replacement ECM is the definitive solution to get your vehicle running smoothly and reliably again, restoring your peace of mind and confidence on the road.

Common Symptoms of a Failing ECM & Your Direct Solution

A failing engine computer can cause a cascade of confusing problems. If you’re experiencing any of the following, this pre-programmed ECM is your answer:

  • Persistent Check Engine Light: Especially with communication-related Diagnostic Trouble Codes (DTCs) like P0601, P0602, P0606, or U-codes.
  • Engine Performance Issues: Unexplained drops in power, poor acceleration, and decreased fuel economy.
  • Stalling or Rough Idle: The engine may stall unexpectedly at stops or run erratically.
  • No-Start Condition: The engine cranks but refuses to start, often due to a lack of fuel or spark command from the ECM.
  • Transmission Problems: Harsh or erratic shifting can sometimes be traced back to faulty ECM signals.

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We handle the complex part for you. By purchasing this programmed 2008-2010 Malibu ECM 12602044, you are bypassing the expensive and time-consuming trip to the dealership for programming.

Features & Benefits

  • ✔ VIN-Specific Programming: Arrives at your door fully flashed with the latest GM-certified software for your exact vehicle. Just provide your VIN at checkout, and we handle the rest.
  • ✔ Plug-and-Play Installation: Once a security relearn procedure is performed, this unit is ready to go. This eliminates the need for specialized, expensive scan tools or a trip to the dealer.
  • ✔ Restored Engine Efficiency: With updated software and proper function, your engine will regain its optimal fuel efficiency and power delivery.
  • ✔ Guaranteed Compatibility: This module is the correct replacement for a wide range of service numbers, including 12590032, 12603530, 12605843, and more. We guarantee it’s the right part for your car.
  • ✔ Purchase with Confidence: This unit is backed by our one-year replacement warranty.

Expert Insight: The ‘Ghost’ in the Machine

We recently worked with a mechanic stumped by a 2009 Malibu Hybrid that would randomly shut down while driving—a terrifying and dangerous fault. They had replaced the battery, alternator, and multiple sensors, but the ‘ghost’ remained. The issue was a hairline crack on the ECM’s internal board that would expand when hot, breaking the circuit. After installing our programmed 2008-2010 Malibu ECM 12602044, the car ran flawlessly. This highlights how a faulty ECM can mimic many other failures, making it the smart place to start for complex electronic issues.

Frequently Asked Questions

Do I need to have this programmed by a dealer or mechanic?

No. This is the primary benefit of our service. The ECM will arrive at your door already programmed with the latest GM software matched specifically to your vehicle’s VIN. This saves you hundreds of dollars and significant hassle.

How do I provide my vehicle’s VIN?

You can add your 17-digit Vehicle Identification Number (VIN) to the notes section during checkout. If you forget, don’t worry! We will contact you via email after your purchase to request it. We cannot ship the part until we have programmed it.

Is any other procedure needed after I install it?

In most cases, you will need to perform a simple security relearn procedure (also known as a Passlock or anti-theft relearn). This can typically be done without any special tools and involves a sequence of key turns. Instructions are widely available online, or your mechanic can perform it in minutes.

What if the part number on my old ECM is different from 12602044?

That’s very common. GM updates part numbers frequently. This ECM, part number 12602044, is the correct, updated service replacement for all the numbers listed in the description (like 12590032, 12603530, etc.). As long as your vehicle is on the fitment list, this is the correct part for you.

How can I be 100% sure this will fit my car?

The best way to ensure perfect compatibility is by providing us with your VIN. The extensive fitment list provided is accurate, but the VIN number allows us to verify the exact calibration and software your specific vehicle requires, guaranteeing a perfect match. When you order a programmed 2008-2010 Malibu ECM 12602044 from us, you get the right part, the first time.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

12602044

Interchange part number

PartNumber

590

Model

MALIBU

Year

2009

Brand

GM

Manufacturer Part Number

, , , , ,

Hardware Type

Scroll to Top