Restore Your Tahoe’s Reliability and Performance
Is your 2008 or 2009 Chevy Tahoe stalling unexpectedly, struggling to start, or showing a check engine light? A failing Fuel Pump Control Module (FPCM) is one of the most common culprits behind these frustrating and stressful issues. Don’t let a faulty module leave you and your family stranded. This direct-fit, pre-programmed FPCM is the definitive solution to get your trusted SUV back on the road, running smoothly and dependably without a costly trip to the dealership.
Common Symptoms & Your Direct-Fit Solution
A failing FPCM can mimic other fuel system problems, but it often presents with a specific set of symptoms. If you’re experiencing any of the following, this module is your answer:
- Engine stalling, especially while driving or at idle
- Extended cranking time or a complete no-start condition
- Noticeable hesitation or stumbling during acceleration
- Reduced engine power and poor fuel economy
- Check Engine Light with Diagnostic Trouble Codes (DTCs) such as P069E, P0230, or P025A
This isn’t just a replacement part; it’s a complete solution. We professionally program each 2008-2009 Tahoe Fuel Pump Control Module to your vehicle’s specific Vehicle Identification Number (VIN) before it ships. This crucial step ensures perfect communication with your vehicle’s computer systems, restoring factory performance and eliminating the need for expensive dealer-only programming tools.
Features & Tangible Benefits
- ✔ VIN-Programmed for You: Arrives at your door ready for installation. Simply provide your VIN after purchase, and we handle the complex programming, saving you time and hundreds of dollars in dealer fees.
- ✔ Latest GM Software Updates: We flash each module with the newest software from General Motors, which includes critical updates to improve durability and prevent common failure patterns.
- ✔ Restored Engine Performance: A properly functioning FPCM ensures your fuel pump delivers the precise amount of fuel needed, restoring lost power, improving throttle response, and fixing rough idle conditions.
- ✔ Direct-Fit OEM Compatibility: Engineered to match the original form and function of part number 20759945 and a wide range of other compatible part numbers, guaranteeing a hassle-free installation.
- ✔ Peace of Mind Guarantee: This unit is backed by our one-year replacement warranty.
Expert Insight from the Garage
As a technician, I’ve replaced hundreds of these modules on the GMT900 platform (your Tahoe, Suburban, Silverado, etc.). The original FPCM is mounted on the frame rail, where it’s constantly exposed to road salt, water, and heat from the exhaust. This exposure is the primary reason they fail. The updated GM programming we install helps the module better manage electrical loads and thermal stress, directly addressing the root cause of the original failure. By choosing a pre-programmed module with these updates, you’re not just fixing the problem—you’re installing a more robust and reliable solution for the long haul.
Don’t settle for a generic, un-programmed part that will require an extra trip to a mechanic. This fully programmed 2008-2009 Tahoe Fuel Pump Control Module is the smartest, most efficient way to solve your fuel system problems and restore your confidence in your vehicle. The installation is straightforward for any DIYer with basic tools, allowing you to complete the repair in your own driveway.
Frequently Asked Questions
Why is programming necessary for this module?
The Fuel Pump Control Module is a smart device that communicates directly with your vehicle’s main computer (ECM). Programming with your VIN ensures it has the correct software and security credentials to operate seamlessly within your Tahoe’s specific electronic ecosystem, controlling fuel pressure with precision.
Where is this module located on my 2008-2009 Tahoe?
You will typically find the FPCM mounted on the driver’s side frame rail, often above or near the spare tire. Its location makes it susceptible to corrosion, which is a common cause of failure.
Is this a difficult part to replace myself?
For someone with basic mechanical skills, this is a very manageable job. It typically involves disconnecting the battery, unplugging the electrical connector, and removing a few bolts. Since our module is pre-programmed, there are no complicated computer steps required after installation.
How do I provide my VIN for programming?
After you complete your purchase, simply reply to your order confirmation email with your 17-digit VIN, or send it to us through the website’s messaging system. We cannot ship your part until we receive this information.
Will this fix a P069E check engine light code?
Yes, DTC P069E (Fuel Pump Control Module Commanded On) is one of the most common codes indicating a failure of the FPCM. Replacing the module with this pre-programmed unit is the correct and most effective repair for this specific code.
Does this fit other GM trucks and SUVs?
Absolutely. This 2008-2009 Tahoe Fuel Pump Control Module is also the correct part for a wide range of vehicles like the Silverado, Sierra, Suburban, Yukon, Escalade, and more from the same era. Please check the fitment list on this page to confirm compatibility with your specific vehicle.