Is Your Truck Stalling, Hesitating, or Refusing to Start?
Nothing is more frustrating than a vehicle you can’t rely on. If your Chevrolet Tahoe, Silverado, or other GM truck is experiencing sudden stalling, hard starting, or a complete no-start condition, a failing Fuel Pump Control Module (FPCM) is the most likely culprit. This critical component, often exposed to harsh conditions on the frame rail, regulates voltage to the fuel pump. When it fails, it leaves you stranded. This isn’t just an inconvenience; it’s a major disruption to your work day or family plans.
Common Symptoms & Your Direct-Fit Solution
A faulty FPCM can trigger a range of issues that mimic a bad fuel pump. Before you spend hundreds on a pump you might not need, check for these classic signs of a failing module:
- Engine cranks but will not start
- Vehicle starts and then immediately stalls
- Hesitation or stumbling during acceleration
- Reduced engine power and poor performance
- Check Engine Light with codes like P069E, P0230, or U0109
This is the definitive solution. We provide a quality-tested 2008-2009 Tahoe Fuel Pump Control Module that arrives at your door completely programmed to your vehicle’s specific Vehicle Identification Number (VIN). This eliminates the most expensive and time-consuming part of the repair: a trip to the dealership for programming. You get a reliable part that’s ready for a straightforward installation.
Features & Real-World Benefits
- ✔ VIN-Programmed for Your Vehicle: This module arrives ready for installation. No expensive dealer programming, no special tools required. Just plug it in and restore your vehicle’s function.
- ✔ Loaded with Latest GM Software: We flash each unit with the newest updates from General Motors, ensuring optimal fuel delivery, efficiency, and long-term reliability.
- ✔ Direct-Fit Replacement: Engineered to match the original factory part (15213110 and other compatible numbers), guaranteeing a perfect fit and seamless connection with your vehicle’s wiring.
- ✔ Solves Common Fuel Delivery Issues: Directly addresses the root cause of stalling and no-start problems related to codes like P069E, getting you back on the road with confidence.
- ✔ This unit is backed by our one-year replacement warranty.: Your purchase is protected, giving you complete peace of mind.
Expert Insight: Why Pre-Programmed is the ONLY Way to Go
As a technician, I’ve seen countless drivers get stuck in the repair cycle. They buy a module online, install it, and the truck still won’t start. Why? Because these FPCMs have vehicle-specific software. Without programming, the module cannot communicate with the vehicle’s main computer (ECM). Your options are to tow the vehicle to a dealer and pay $150+ for programming, or buy a pre-programmed unit from us. Our process takes the guesswork and extra cost out of the equation. We handle the complex part so you can handle the installation with basic tools in your own driveway, saving you significant time and money.
Don’t let a faulty module dictate your schedule. Take control of your repair with this ready-to-install 2008-2009 Tahoe Fuel Pump Control Module. By providing your VIN at checkout, you’re not just buying a part; you’re buying a complete, hassle-free solution that restores the dependability you need from your truck or SUV.
Frequently Asked Questions
Why do you need my vehicle’s VIN?
Your vehicle’s VIN (Vehicle Identification Number) is required so we can load the exact, correct software from GM for your specific make, model, and options. This ensures the 2008-2009 Tahoe Fuel Pump Control Module communicates perfectly with your engine computer, making the installation truly plug-and-play.
Is this part difficult to install?
For most GM trucks and SUVs like the Tahoe, Sierra, and Silverado, the FPCM is located on the driver’s side frame rail, near the spare tire. It’s typically held on by a few bolts. For a DIYer with basic hand tools, it’s a very manageable job that can often be completed in under an hour. No special programming tools are needed since we’ve already done that for you.
Will this fix a Check Engine Light with code P069E?
Yes, P069E (Fuel Pump Control Module Commanded On) is one of the most common diagnostic trouble codes indicating a failure of the FPCM. While you should always confirm your diagnosis, this part is the primary solution for that specific code.
What is the condition of this part?
This is a high-quality, fully tested component guaranteed to perform to OEM specifications. Each module is inspected and programmed with the latest software to ensure reliability. It is backed by our solid warranty for your peace of mind.
What happens if I install a module that isn’t programmed?
An unprogrammed module will not work. The vehicle’s computer systems will not recognize it, and the fuel pump will not activate. Your vehicle will continue to have a no-start condition, and you will then need to have it towed to a facility with expensive GM programming equipment.
How do I provide my VIN after purchase?
After you complete your purchase, you will receive an email with instructions, or you can simply reply to your order confirmation email with your 17-digit VIN. We cannot ship your part until we have this information to program it correctly.