Programmed 2008-2009 Pontiac G8 Body Control Module | 20935349

Restore Full Electrical Function

This Body Control Module for your 2008-2009 Pontiac G8 arrives pre-programmed to your vehicle’s VIN. It’s the direct solution for common electrical faults like erratic lights, power window failure, or security system issues. Engineered to meet or exceed OEM specifications and flashed with the latest GM software. Eliminate the guesswork and dealer fees—order your plug-and-play BCM today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-920 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Electrical Core

Are you battling frustrating electrical gremlins in your Pontiac G8? Flickering lights, malfunctioning power windows, a temperamental security system, or even a car that refuses to start can all point to a single culprit: a failing Body Control Module (BCM). The BCM acts as the central nervous system for your vehicle’s electronics, and when it falters, it can cause a cascade of unpredictable and annoying issues. This isn’t just an inconvenience; it’s a matter of reliability and confidence in your car. Stop chasing symptoms and replace the source of the problem with our fully programmed BCM, designed to restore your vehicle’s factory performance and your peace of mind.

Common Symptoms & Your Solution

If you’re experiencing any of the following, a faulty BCM is the likely cause. This module is the definitive solution for:

  • Intermittent or non-working interior/exterior lights
  • Power windows, locks, or mirrors behaving erratically
  • Security system or key fob recognition issues
  • Warning lights appearing on the dash with no clear cause
  • Unexplained battery drain when the vehicle is off
  • No-start conditions where the engine cranks but won’t fire

Features & Benefits

  • âś” Plug & Play Installation: This module arrives pre-programmed to your vehicle’s specific VIN. No expensive trips to the dealer for flashing are required.
  • âś” Latest GM Software: We flash each BCM with the newest, most stable software updates from General Motors, ensuring optimal performance and compatibility.
  • âś” Guaranteed Compatibility: By programming to your VIN, we ensure this BCM communicates flawlessly with your car’s other electronic modules.
  • âś” Cost-Effective Repair: Save hundreds of dollars compared to the cost of a new module and programming fees at a dealership.
  • âś” No Core Charge: Keep your old part. There’s no need to worry about the hassle and expense of shipping a core back to us.
  • âś” Reliable Performance: This unit is backed by our one-year replacement warranty.

Expert Insight: The Brain Transplant for Your Car

Think of the BCM as the traffic controller for all your car’s comfort and convenience features. It manages everything from your dome light to your door locks. When it fails, the signals get crossed, leading to chaos. In the past, replacing one meant towing your car to a dealer, paying for the part, and then paying hundreds more in labor for them to program it with their proprietary tools. Our service completely changes the game. We perform this critical ‘brain transplant’ on the bench before it ever gets to you. By providing your VIN, you’re giving us the exact ‘DNA’ of your car, allowing us to create a module that’s a perfect match, ready to restore order the moment it’s installed. This is the same expert-level service a dealer provides, delivered directly to your door.

Important Post-Installation Procedures

To ensure full system functionality after installation, some vehicles may require one or more of the following procedures to be performed with a professional-grade scan tool. This is a normal part of replacing a BCM and ensures all related vehicle systems are properly synchronized.

  • Airbag System Sync: If the airbag warning light is illuminated after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the new BCM with the airbag module.
  • Brake Pedal Position Relearn: A brake pedal position sensor recalibration may be required to ensure correct brake light operation and to satisfy the traction control system.

Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.

Extensive Vehicle Compatibility

This BCM is a direct replacement for a wide array of General Motors vehicles. Please verify your part number or consult the list below. This unit replaces part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

Fits models such as: Acadia (07-12), Avalanche 1500 (10), Caprice (11-13), Captiva Sport (12), CTS (08-13), DTS (06-11), Enclave (08-12), Equinox (07-09), Escalade (10), Express Vans (08-12), 2008-2009 Pontiac G8 Body Control Module, Hummer H2 (08-09), Impala (06-13), Lucerne (06-11), Monte Carlo (06-07), Outlook (07-10), Savana Vans (08-12), SRX (07-09), STS (10), Suburban 1500 (10), Tahoe (10), Torrent (07-09), Traverse (09-12), Vue (08-10), Yukon (10), and more. Please confirm fitment for your specific vehicle.

Frequently Asked Questions

What exactly does a Body Control Module do?

The BCM is a computer that manages many of the non-engine-related electronic functions in your vehicle. This includes power windows, power mirrors, air conditioning, the anti-theft system, central locking, and interior/exterior lighting.

Is this part truly ‘plug-and-play’?

Yes, for most vehicles. We handle the difficult programming part by flashing the module to your VIN before shipping. This means you don’t need to take it to a dealer for programming. However, as noted above, some vehicles may require a simple ‘relearn’ procedure for the airbag or brake systems using a scan tool after installation.

What is a VIN and where do I find it?

The VIN (Vehicle Identification Number) is your car’s unique 17-digit serial number. You can find it on a small plate on the driver’s side of the dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.

What happens after I place my order?

After you complete your purchase, you will need to send us your vehicle’s 17-digit VIN. We cannot program and ship your 2008-2009 Pontiac G8 Body Control Module until we receive this information. Once we have your VIN, we will program the unit and ship it out to you promptly.

Will this fix my specific electrical problem?

This BCM is the solution for a wide range of common electrical failures. If you’re experiencing multiple, seemingly unrelated electrical issues like those listed in the description, there is a very high probability that the BCM is the root cause. Proper vehicle diagnosis is always recommended.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

20935349

Interchange part number

PartNumber

591

Model

G8

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top